Fall arrest system failure टूलबॉक्स टॉक

यह क्या है

A harness, lanyard, lifeline or anchor that fails to stop a fall safely, through damage, poor fitting, an unrated anchor, too little clearance below, or a swing into a structure.

जाँचने वाले नियंत्रण, सबसे असरदार पहले

1. Prevent falls with edge protection, work platforms or a travel-restraint system, so fall arrest is the last line of defence rather than the plan.
2. Use anchor points designed and certified for fall arrest, installed and inspected by a competent person to the manufacturer's instructions and AS/NZS 1891.
3. Work out the fall clearance, swing-down and swing-back before rigging, and choose a lanyard or self-retracting lifeline that stops the worker before they strike the ground or a structure.
4. Inspect harnesses, lanyards, connectors and lifelines before each use, and take out of service anything damaged or that has arrested a fall.
5. Give each worker a harness of the right size and rating, and train them to fit, adjust and connect it correctly.
6. Keep lines clear of sharp edges, heat and chemicals, and have a rescue plan and equipment ready to reach a suspended worker quickly.

क्रू के लिए सवाल

1. आज इस जॉब पर fall arrest system failure कहाँ सामने आ सकता है?
2. सबसे असरदार नियंत्रण है: “Prevent falls with edge protection, work platforms or a travel-restraint system, so fall arrest is the last line of defence rather than the plan”। क्या हम यहाँ ऐसा कर सकते हैं? अगर नहीं, तो क्यों नहीं?
3. इस साइट पर fall arrest system failure के कौन से नियंत्रण गायब हैं या काम नहीं कर रहे?
4. fall arrest system failure की वजह से आप कब काम रोकेंगे, और किसे बताएँगे?
5. इस जॉब पर हम किसी ख़तरे, बाल-बाल बचने की घटना या हादसे की रिपोर्ट कैसे करते हैं?