얼리 액세스 혜택:얼리 액세스: 30% 할인, 구독을 유지하는 동안 계속.

혜택 받기

Blocked access and egress 툴박스 미팅

이 페이지는 현재 영어로만 제공됩니다.

작업 전 회의(pre-start)나 툴박스 미팅에서 읽어 주고, 질문을 함께 이야기한 뒤, 모두 서명하게 하세요. 저희 blocked access and egress 페이지와 이를 다루는 SafetyDocs 템플릿 61개를 바탕으로 만들었습니다.

현장
날짜
진행자

무엇인가요

Entries, exits and escape routes that are obstructed, too small or left unsecured, which trap people or hinder their rescue.

확인할 관리 조치 (효과가 큰 순서)

  1. Plan entry and exit points so they are large enough for workers, their equipment and a rescue using a stretcher or harness.
  2. Keep exits, escape routes and access ways clear of materials, waste, hoses and leads at all times.
  3. Secure hatches and doors so they cannot close or lock while people are inside, and barricade openings when unattended.
  4. Check emergency exits and escape routes at the start of each shift and after any change to the work area.
  5. Keep rescue equipment set up at the entry point, and confirm the rescue plan works for that opening.

작업 중 어디서 생기나요

blocked access and egress 관련 SafetyDocs 템플릿의 작업 단계:

작업자에게 할 질문

  1. 오늘 이 작업에서 어디서 blocked access and egress 위험이 생길 수 있나요?
  2. 오늘 작업에 다음이 포함되나요: Blocked access and egress?
  3. 가장 효과적인 관리 조치는 “Plan entry and exit points so they are large enough for workers, their equipment and a rescue using a stretcher or harness”입니다. 여기서 할 수 있나요? 할 수 없다면 왜 그런가요?
  4. 이 현장에서 빠졌거나 제대로 작동하지 않는 blocked access and egress 관리 조치는 무엇인가요?
  5. blocked access and egress 때문에 작업을 멈춰야 하는 때는 언제이고, 누구에게 알리나요?
  6. 이 작업에서 위험 요소, 아차 사고, 사고는 어떻게 보고하나요?

서명 기록

참석한 모든 사람이 아래에 서명합니다. 툴박스 미팅 기록과 함께 보관하세요.

이름회사서명

미팅을 위한 출발점일 뿐, SWMS나 위험성 평가가 아닙니다. 현장과 작업자에 맞는 내용을 추가하세요.