Falling objects 툴박스 미팅

무엇인가요

Tools, materials or debris falling from height onto people below.

확인할 관리 조치 (효과가 큰 순서)

1. Pre-assemble or prefabricate at ground level to reduce the tools and materials needed at height.
2. Fit toeboards, mesh screens, catch platforms or debris netting on scaffolds and open edges.
3. Set up exclusion zones with barricades and signs below overhead work, and keep people out while it is under way.
4. Tether tools at height, and keep materials stacked and secured away from edges and openings.
5. Lower debris in containers or through enclosed chutes instead of throwing it from height.
6. Wear hard hats wherever objects could fall from above, including when passing beneath scaffolds and cranes.

작업 중 어디서 생기나요

falling objects 관련 SafetyDocs 템플릿의 작업 단계:

• Falling objects (collapsing clutter)Bodily injuries출처: Hoarder Cleaning Plan
• Work area set-upSet up exclusion zones and edge protection, and protect people below from falling objects출처: Roofing - Tiled
• Installing pipeworkInstall pipework, controlling falling objects, tools, cutting and silica dust출처: Plumbing Suspended Pipework
• Ceiling installationInstall the ceiling from safe trestles and ladders, controlling electricity, falling objects, cuts and silica dust출처: Suspended Grid System Ceiling Installation
• Installing replacement partsInstall replacement parts from the EWP, guarding against falls and falling objects.출처: Cool Room Repair

작업자에게 할 질문

1. 오늘 이 작업에서 어디서 falling objects 위험이 생길 수 있나요?
2. 오늘 작업에 다음이 포함되나요: Falling objects (collapsing clutter)?
3. 가장 효과적인 관리 조치는 “Pre-assemble or prefabricate at ground level to reduce the tools and materials needed at height”입니다. 여기서 할 수 있나요? 할 수 없다면 왜 그런가요?
4. 이 현장에서 빠졌거나 제대로 작동하지 않는 falling objects 관리 조치는 무엇인가요?
5. falling objects 때문에 작업을 멈춰야 하는 때는 언제이고, 누구에게 알리나요?
6. 이 작업에서 위험 요소, 아차 사고, 사고는 어떻게 보고하나요?