Fall arrest system failure बारे टुलबक्स टक

यो के हो

A harness, lanyard, lifeline or anchor that fails to stop a fall safely, through damage, poor fitting, an unrated anchor, too little clearance below, or a swing into a structure.

जाँच्नुपर्ने नियन्त्रण, सबैभन्दा प्रभावकारी पहिले

1. Prevent falls with edge protection, work platforms or a travel-restraint system, so fall arrest is the last line of defence rather than the plan.
2. Use anchor points designed and certified for fall arrest, installed and inspected by a competent person to the manufacturer's instructions and AS/NZS 1891.
3. Work out the fall clearance, swing-down and swing-back before rigging, and choose a lanyard or self-retracting lifeline that stops the worker before they strike the ground or a structure.
4. Inspect harnesses, lanyards, connectors and lifelines before each use, and take out of service anything damaged or that has arrested a fall.
5. Give each worker a harness of the right size and rating, and train them to fit, adjust and connect it correctly.
6. Keep lines clear of sharp edges, heat and chemicals, and have a rescue plan and equipment ready to reach a suspended worker quickly.

टोलीका लागि प्रश्न

1. आजको काममा fall arrest system failure कहाँ देखा पर्न सक्छ?
2. सबैभन्दा प्रभावकारी नियन्त्रण हो: “Prevent falls with edge protection, work platforms or a travel-restraint system, so fall arrest is the last line of defence rather than the plan”। के हामी यहाँ त्यो गर्न सक्छौँ? सक्दैनौँ भने, किन?
3. यो साइटमा fall arrest system failure का कुन नियन्त्रण छैनन् वा काम गरिरहेका छैनन्?
4. fall arrest system failure का कारण तपाईं कहिले काम रोक्नुहुन्छ, र कसलाई भन्नुहुन्छ?
5. यो काममा खतरा, बालबाल बचेको घटना वा दुर्घटना कसरी रिपोर्ट गर्ने?