Charla de seguridad sobre Fire and explosion

Qué es

Fuel, flammable gases or vapours, dust or hot work igniting and causing fire, burns or explosion.

Controles que hay que revisar, del más eficaz al menos eficaz

1. Substitute non-flammable products where possible, and keep only small quantities of flammable liquids and gases at the work area.
2. Remove or isolate ignition sources, and use intrinsically safe equipment where flammable atmospheres may occur.
3. Store flammable liquids in suitable containers and flammable liquids cabinets, away from heat, oxidisers and exits.
4. Issue hot work permits, clear combustibles from the area and keep a fire watch during and after hot work.
5. Refuel plant and equipment with engines off and cooled, away from hot work and other ignition sources.
6. Keep suitable fire extinguishers close to the work and train workers to use them.

Dónde aparece en el trabajo

Pasos de trabajo de plantillas de SafetyDocs que tratan fire and explosion:

• Discharging fire extinguisher for service requirementsFollow the SDS and never discharge towards a personDe Fire Extinguisher Installation - Maintenance
• Fire Extinguisher InstallationLocate wall services, control dust, silica and asbestos, and mount extinguishers to AS 2444De Fire Extinguisher Installation - Maintenance
• Fire Extinguisher MaintenanceService extinguishers to the manufacturer and AS 1851 and complete the logbookDe Fire Extinguisher Installation - Maintenance
• Make safe – fire damageMake fire-damaged areas safeDe Make Safe
• Work area set-upBarricade the work area and control electrical, fire, debris and silica dust hazardsDe Concrete Grinding and Polishing

Preguntas para el equipo

1. ¿Dónde podría aparecer fire and explosion hoy en este trabajo?
2. ¿Alguna de estas tareas forma parte del trabajo de hoy?: Discharging fire extinguisher for service requirements; Fire Extinguisher Installation; Fire Extinguisher Maintenance
3. El control más eficaz es: «Substitute non-flammable products where possible, and keep only small quantities of flammable liquids and gases at the work area». ¿Podemos hacerlo aquí? Si no, ¿por qué no?
4. ¿Qué controles para fire and explosion faltan o no funcionan en esta obra?
5. ¿Cuándo detendrías el trabajo por fire and explosion, y a quién avisarías?
6. ¿Cómo informamos de un peligro, un cuasi accidente o un incidente en este trabajo?