Fall arrest system failure 툴박스 미팅

무엇인가요

A harness, lanyard, lifeline or anchor that fails to stop a fall safely, through damage, poor fitting, an unrated anchor, too little clearance below, or a swing into a structure.

확인할 관리 조치 (효과가 큰 순서)

1. Prevent falls with edge protection, work platforms or a travel-restraint system, so fall arrest is the last line of defence rather than the plan.
2. Use anchor points designed and certified for fall arrest, installed and inspected by a competent person to the manufacturer's instructions and AS/NZS 1891.
3. Work out the fall clearance, swing-down and swing-back before rigging, and choose a lanyard or self-retracting lifeline that stops the worker before they strike the ground or a structure.
4. Inspect harnesses, lanyards, connectors and lifelines before each use, and take out of service anything damaged or that has arrested a fall.
5. Give each worker a harness of the right size and rating, and train them to fit, adjust and connect it correctly.
6. Keep lines clear of sharp edges, heat and chemicals, and have a rescue plan and equipment ready to reach a suspended worker quickly.

작업자에게 할 질문

1. 오늘 이 작업에서 어디서 fall arrest system failure 위험이 생길 수 있나요?
2. 가장 효과적인 관리 조치는 “Prevent falls with edge protection, work platforms or a travel-restraint system, so fall arrest is the last line of defence rather than the plan”입니다. 여기서 할 수 있나요? 할 수 없다면 왜 그런가요?
3. 이 현장에서 빠졌거나 제대로 작동하지 않는 fall arrest system failure 관리 조치는 무엇인가요?
4. fall arrest system failure 때문에 작업을 멈춰야 하는 때는 언제이고, 누구에게 알리나요?
5. 이 작업에서 위험 요소, 아차 사고, 사고는 어떻게 보고하나요?