얼리 액세스 혜택:얼리 액세스: 30% 할인, 구독을 유지하는 동안 계속.

혜택 받기

Fall arrest system failure

A harness, lanyard, lifeline or anchor that fails to stop a fall safely, through damage, poor fitting, an unrated anchor, too little clearance below, or a swing into a structure.

이 페이지는 현재 영어로만 제공됩니다.

fall arrest system failure 무료 툴박스 미팅 자료

다른 이름: Fall arrest failure, Harness failure, Lanyard failure, Anchor point failure

fall arrest system failure 관리 방법

  1. Prevent falls with edge protection, work platforms or a travel-restraint system, so fall arrest is the last line of defence rather than the plan.
  2. Use anchor points designed and certified for fall arrest, installed and inspected by a competent person to the manufacturer's instructions and AS/NZS 1891.
  3. Work out the fall clearance, swing-down and swing-back before rigging, and choose a lanyard or self-retracting lifeline that stops the worker before they strike the ground or a structure.
  4. Inspect harnesses, lanyards, connectors and lifelines before each use, and take out of service anything damaged or that has arrested a fall.
  5. Give each worker a harness of the right size and rating, and train them to fit, adjust and connect it correctly.
  6. Keep lines clear of sharp edges, heat and chemicals, and have a rescue plan and equipment ready to reach a suspended worker quickly.

일반적인 관리 조치를 효과가 큰 순서로 정리했습니다. 실제 작업과 현장의 관리 조치는 내 SWMS에서 정합니다.

Fall arrest system failure 관련 템플릿

업종별 SWMS

함께 나타나는 위험 요소

이 템플릿들이 인용하는 법령