템플릿 문서는 영어로 작성되어 있습니다.

Stainless Steel Bench-top-Splashback

SWMS · SWMS-10645

작업 단계 10개
버전 3
Shop Fitting
어떤 휴대폰에서든 읽기 가능

This SWMS covers the hazards and controls for installing stainless steel bench-tops and splashbacks, including cutting, grinding and welding on site. It suits installation works on construction sites and in existing premises, both domestic and commercial.

The SWMS takes your crew through each step, from training on respirable crystalline silica dust, arriving on site and setting up the work area to the environment, housekeeping, hazardous substances, transferring and placing the bench-top, hot work, completion and emergency response.

It suits businesses and contractors installing stainless steel bench-tops and splashbacks, and the safety officers and project managers who oversee the work.

Written by SafetyDocs safety experts, who have been writing safety documents since 2004.

Stainless Steel Bench-top-Splashback

SWMSVersion 3

Company doing the work: [Company]
Business contact and phone: —
Responsible person (for monitoring SWMS and work): —
Responsible person's phone: —
Responsible person's signature: —
Date signed: —

Principal Contractor (PC): —
PC Address: —
PC phone: —
Date SWMS provided to PC: —
Job Site Address: —
Part of a construction project: —

Site Management Plan

If the work is part of a construction project, this SWMS must align with requirements of the Site Management Plan in place for the Construction Project.

High-risk construction work

This work activity involves the following 'High-Risk Construction Work' (HRCW – identified in the Job Task column)

Hazardous AtmosphereWork in an area that may have a contaminated or flammable atmosphere

Planning and preparation

Planning/preparation

Liaise with Principal Contractor to identify on-site safety systems and procedures
Establish supervisory and communication arrangements
Principal contractor to confirm emergency response procedures are in place.

Hold points

Hold points identified and signed off before continuing work. (specify the hold points)

Training and licences

All workers to have a General Construction Induction Card
Relevant workers have relevant certificates of competency, licenses, and training. Specify on the SWMS Sign-off for each worker.
Trained First Aider on site
All workers trained in site-specific emergency and evacuation procedures, SWMS, safe work procedures, and safety data sheets.

Worker duties and responsibilities

Fit condition for work, i.e., no signs of fatigue, alcohol or drugs
Attend all site inductions/briefings
Comply with all site requirements, e.g. PPE, Traffic Management Plans (TMP)
Only carry out work related to the contract
Inspect completed work and report possible safety, environmental and quality matters to the supervisor.

Monitoring and review

All people involved in the task must have this SWMS communicated to them before work commences
SWMS to be reviewed and amended if necessary, in consultation with relevant people after any near miss or incident
If additional site hazards identified, review this SWMS and amend control measures to suit
People, including workers, contractors and sub-contractors, affected by the revisions to this SWMS, must be informed ASAP
Give the principal contractor a copy of the revised SWMS
The site supervisor to monitor works against the controls stated in this SWMS
SWMS must be kept on-site and made available for inspection or review
Keep a record of this SWMS until the job is complete or for two years if involved in a notifiable incident
Regardless of any other factor, the person in control of the workplace must review this SWMS at least annually.

Site-specific notes

Legislation and codes of practice

None listed.

Personal protective equipment

Foot Protection
Hearing Protection
High Visibility
Face Protection
Hand Protection
Protective Clothing
Breathing Protection

Do not wear rings, watches or jewellery that may become entangled. Long and loose hair must be tied back.

Job steps, hazards and controls

Work activity
Provide training on the health effects associated with RCS
- Hazard
  Exposure to respirable crystalline silica (RCS) – dust inhalation
  Before controls3 High
  Controls
  - Training and Information provided to workers on RCS should include:
    Identification of RCS dust through Safety Datasheet (SDS) or labels
    Dust exposure prevention strategies
    Checking controls are working and using them
    When and how to use any respiratory protective equipment provided and what to do if something goes wrong (Including worker respirator fit and check processes).
  After controls2 Moderate
  Responsible
  - Supervisor

IR before controls · RR after controls1 LLow2 MModerate3 HHigh4 AAcute

Overall risk after controls2 MModeratethe highest rating after controls

Work activity
Arrival on-site & assess onsite conditions
Assess the site conditions and put the necessary precautions in place
Work activity
Work area set-up
Set up a secure work zone to keep unauthorised people out
Work activity
Environment
Manage the environmental impacts of noise, air quality and waste
Work activity
House keeping
Keep the work area clean to prevent slips, trips and falls
Work activity
Hazardous substance use
Handle and use hazardous chemicals and materials safely
Work activity
Benchtop transfer & placement
Reduce the risk of musculoskeletal injury when handling materials
Work activity
Welding, cutting & grinding at site
Take safety measures for hot work to prevent fires, explosions and personal injury
Work activity
On completion
Secure the site and equipment on completion to prevent unauthorised access and accidents
Work activity
Emergency response
Prepare workers to respond to injuries, fatalities and environmental damage

Permits

Plant and equipment

Hazardous substances

Supervisory arrangements

SWMS Sign-off

This SWMS developed in consultation and cooperation with workers and relevant organisation representatives. I have read the above SWMS, and I understand its contents. I confirm that I have the skills and training, including relevant certification, to conduct the task as described. I agree to comply with safety requirements within this SWMS, including risk control measures, safe work instructions, and PPE described.

Worker’s name	Job role / positione.g. supervisor, worker, trainee	Licences, competencies & qualificationsType / descriptionClassNumber	Date	Signature
-	-	-	-	-
-	-	-	-	-
-	-	-	-	-
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)

Hierarchy of controls

Risk matrix

Likelihood	Criteria	Description

Likelihood ↑	InsignificantNo effect, or so minor that the effect is acceptable	MinorMinor first aid treatment, minimal business disruption, minimal environmental effect	ModerateSerious injuries, medium business interruption, medium environmental impact	MajorExtensive injuries or fatality, significant business interruption, environmental harm, prosecution	CatastrophicMultiple permanent disabilities or fatalities, business failure, substantial environmental harm, prosecution or imprisonment
	Consequence →
Almost certainExpected in most circumstances	2 Moderate	2 Moderate	3 High	4 Acute	4 Acute
LikelyWill probably occur in most circumstances	2 Moderate	2 Moderate	3 High	4 Acute	4 Acute
PossibleCould possibly occur at some time	1 Low	2 Moderate	2 Moderate	3 High	4 Acute
UnlikelyUnlikely but possible	1 Low	1 Low	2 Moderate	3 High	4 Acute
RareHighly unlikely to occur	1 Low	1 Low	2 Moderate	2 Moderate	3 High

1 LowRecord and monitor. Proceed with work, and review the risks regularly.
2 ModerateMaintain control measures. Be cautious when working, and monitor and review regularly.
3 HighReview before commencing work. Introduce new controls or maintain high-level controls to lower the risk level, and monitor the controls frequently.
4 AcuteDo not proceed until the risk level is reduced. Immediately introduce high-level controls, and re-assess before proceeding.

작업 단계 9개 더: Arrival on-site & assess onsite conditions부터 Emergency response까지

단계마다 위험 요소, 위험도 평가, 관리 조치가 있고, 작업자 서명란도 포함됩니다.

에디터 무료로 써 보기 이 템플릿 받기

브라우저에서 보이는 모습

이 템플릿 받기

무료로 가입한 뒤 받는 방법을 선택하세요. 회사 정보는 자동으로 채워집니다.

유료 요금제에 포함
요금제의 템플릿 크레딧을 사용하세요. 이 템플릿은 1입니다.
요금제와 가격 비교
한 번 구매하기
$89.95 한 번 결제로 계속 소유합니다. 무료 요금제에서도 사용할 수 있습니다.

에디터 무료로 써 보기 무료 가입

가입에 카드가 필요 없습니다. 얼리 액세스 회원은 모든 요금제에서 30% 할인을 받습니다.

다루는 내용

작업 단계 10개

Provide training on the health effects associated with RCSTrain workers to identify and reduce RCS dust exposure
Arrival on-site & assess onsite conditionsAssess the site conditions and put the necessary precautions in place
Work area set-upSet up a secure work zone to keep unauthorised people out
EnvironmentManage the environmental impacts of noise, air quality and waste
House keepingKeep the work area clean to prevent slips, trips and falls
Hazardous substance useHandle and use hazardous chemicals and materials safely
Benchtop transfer & placementReduce the risk of musculoskeletal injury when handling materials
Welding, cutting & grinding at siteTake safety measures for hot work to prevent fires, explosions and personal injury
On completionSecure the site and equipment on completion to prevent unauthorised access and accidents
Emergency responsePrepare workers to respond to injuries, fatalities and environmental damage