템플릿 문서는 영어로 작성되어 있습니다.

Telehandler

SWMS · SWMS-10380

작업 단계 19개
346회 구매됨
버전 9
Earthmoving & Mobile Plant
어떤 휴대폰에서든 읽기 가능

This Telehandler Safe Work Method Statement (SWMS) covers hazards and controls associated with the operation of slewing and non-slewing telescopic handlers.

It covers 19 job steps, from planning, working alone and weather checks to site set-up, lifting and moving loads, changing attachments, fuelling, maintenance and emergency response.

It includes controls for high-risk construction work around mobile plant, fuel and electrical lines, traffic corridors and flammable atmospheres, and for overhead power lines, noise, fatigue and hydraulic leaks.

It suits construction companies, warehousing and logistics operators, agricultural enterprises and mining and resources businesses that operate telehandlers.

Telehandler

SWMSVersion 9

Company doing the work: [Company]
Business contact and phone: —
Responsible person (for monitoring SWMS and work): —
Responsible person's phone: —
Responsible person's signature: —
Date signed: —

Principal contractor (PC): [Principal contractor]
PC address: —
PC phone: [PC phone]
Date SWMS provided to PC: —
Job site address: [Site address]
Part of a construction project: —

Site management plan

If the work is part of a construction project, this SWMS must align with requirements of the Site Management Plan in place for the Construction Project.

High-risk construction work

This work activity involves the following “High-Risk Construction Work” (HRCW - identified in the Job Task column)

Mobile PlantMobile plant movement
Gas MainsWork on or near pressurised gas distribution mains or piping
Hazardous LinesWork on or near chemical, fuel or refrigerant lines
Energised ElectricalWork on or near energised electrical installations or services
Traffic CorridorsWork carried out adjacent to a road, railway or shipping lane, traffic corridor
Hazardous AtmosphereWork in an area that may have a contaminated or flammable atmosphere

Planning and preparation

Planning/Preparation

Liaise with Principal Contractor to identify on-site safety systems and procedures
Establish supervisory and communication arrangements
Principal contractor to confirm emergency response procedures are in place.

Hold points

Hold points identified and signed off before continuing work.

(specify the hold points)

Training/licence

All workers to have a General Construction Induction Card
Relevant workers have relevant certificates of competency, licenses, and training. Specify on the SWMS Sign-off for each worker.
Trained First Aider on site
All workers trained in site-specific emergency and evacuation procedures, SWMS, safe work procedures, and safety data sheets.

Worker duties and responsibilities

Fit condition for work, i.e., no signs of fatigue, alcohol or drugs
Attend all site inductions/briefings
Comply with all site requirements, e.g. PPE, Traffic Management Plans (TMP)
Only carry out work related to the contract
Inspect completed work and report possible safety, environmental and quality matters to the supervisor.

Monitor/review

All people involved in the task must have this SWMS communicated to them before work commences
SWMS to be reviewed and amended if necessary, in consultation with relevant people after any near miss or incident
If additional site hazards identified, review this SWMS and amend control measures to suit
People, including workers, contractors and sub-contractors, affected by the revisions to this SWMS, must be informed ASAP
Give the principal contractor a copy of the revised SWMS
The site supervisor to monitor works against the controls stated in this SWMS
SWMS must be kept on-site and made available for inspection or review
Keep a record of this SWMS until the job is complete or for two years if involved in a notifiable incident
Regardless of any other factor, the person in control of the workplace must review this SWMS at least annually.

Site-specific notes

(add site-specific notes)

Legislation and codes of practice

None listed.

Personal protective equipment (PPE)

Foot Protection
Hearing Protection
High Visibility
Head Protection
Seat Belt

Job steps, hazards and controls

Work activity
Planning
- Hazard
  Falling objects; Exclusion zone breach
  Before controls3 High
  Controls
  - Telehandler team requirements - assess the size and complexity of the work to be undertaken
  - Determine the Telehandler crew required for the task. Consider:
    Number of operators, riggers and dogmen required (If using Telehandler as a crane)
    Whether a trained safety observer is required for maintaining electrical exclusion zones
    Whether a Telehandler coordinator should be appointed.
  After controls2 Moderate
  Responsible
  - Supervisors
- Hazard
  Unlicensed operator
  Before controls4 Acute
  Controls
  - All operators using public roads have the appropriate Driver's Licence
  - Operators hold a valid high-risk work licence for the type of Telehandler they are operating (Telehandler training should be compliant with AS.1418.19: 2007: Telehandlers, hoists and winches – telescopic handler).
  After controls2 Moderate
  Responsible
  - Supervisors
- Hazard
  Contact with electric overhead lines
  Before controls4 Acute
  Controls
  - Liaise with electrical entities where necessary regarding the supply of electricity and control measures for working around existing power supply (e.g. de-energising powerlines) including loading bays and site access.
  After controls2 Moderate
  Responsible
  - Supervisors

IR before controls · RR after controls1 LLow2 MModerate3 HHigh4 AAcute

Overall risk after controls2 MModeratethe highest rating after controls

Work activity
Working alone
Set up check-ins and a buddy for working alone.
Work activity
Check weather conditions & prepare
Check the weather and prepare for heat and cold.
Work activity
Road travel to site & site operation
Inspect the telehandler and drive it safely to and around the site.
Work activity
Arrival on-site & assess onsite conditions
Assess the site on arrival and complete a JSA.
Work activity
Site set-up
Set up exclusion zones, stable ground and power line clearances.
Work activity
Environment
Control noise, waste, fuel and other environmental impacts.
Work activity
Housekeeping
Keep the area clean and mount and dismount the cab safely.
Work activity
Manual tasks
Manage fatigue, seating and lifting posture.
Work activity
Establish a communication protocol
Set up communication with ground workers and other plant.
Work activity
Pre-lift assessment
Check load charts, the load and wind limits before lifting.
Work activity
Lifting & moving loads
Lift, move and place loads safely.
Work activity
Working outside the cabin near powered mobile plant
Stay clear of mobile plant, lasers and noise outside the cabin.
Work activity
Changing attachments
Change attachments and hydraulic connections safely.
Work activity
Operations with hydraulic attachments
Use hydraulic attachments only as intended.
Work activity
Fuelling the plant
Refuel the plant safely.
Work activity
Onsite maintenance
Secure the plant for maintenance and deal with hydraulic leaks safely.
Work activity
On completion
Park, shut down and secure the telehandler.
Work activity
Emergency response
Respond to emergencies and report incidents.

Permits

Plant and equipment

Hazardous substances

Supervisory arrangements

SWMS Sign-off

This SWMS developed in consultation and cooperation with workers and relevant organisation representatives. I have read the above SWMS, and I understand its contents. I confirm that I have the skills and training, including relevant certification, to conduct the task as described. I agree to comply with safety requirements within this SWMS, including risk control measures, safe work instructions, and PPE described.

Worker’s name	Job role / positione.g. supervisor, worker, trainee	Licences, competencies & qualificationsType / descriptionClassNumber	Date	Signature
-	-	-	-	-
-	-	-	-	-
-	-	-	-	-
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)

Hierarchy of controls

Risk matrix

Step 1: Determine likelihood

Step 2: Determine consequence

Step 3: Determine the risk score

Likelihood ↑	InsignificantNo effect, or so minor that the effect is acceptable	MinorMinor first aid treatment, minimal business disruption, minimal environmental effect	ModerateSerious injuries, medium business interruption, medium environmental impact	MajorExtensive injuries or fatality, significant business interruption, environmental harm, prosecution	CatastrophicMultiple permanent disabilities or fatalities, business failure, substantial environmental harm, prosecution or imprisonment
	Consequence →
Almost certainExpected in most circumstances	2 Moderate	2 Moderate	3 High	4 Acute	4 Acute
LikelyWill probably occur in most circumstances	2 Moderate	2 Moderate	3 High	4 Acute	4 Acute
PossibleCould possibly occur at some time	1 Low	2 Moderate	2 Moderate	3 High	4 Acute
UnlikelyUnlikely but possible	1 Low	1 Low	2 Moderate	3 High	4 Acute
RareHighly unlikely to occur	1 Low	1 Low	2 Moderate	2 Moderate	3 High

1 LowRecord and monitor. Proceed with work, and review the risks regularly.
2 ModerateMaintain control measures. Be cautious when working, and monitor and review regularly.
3 HighReview before commencing work. Introduce new controls or maintain high-level controls to lower the risk level, and monitor the controls frequently.
4 AcuteDo not proceed until the risk level is reduced. Immediately introduce high-level controls, and re-assess before proceeding.

Step 4: Record risk

작업 단계 18개 더: Working alone부터 Emergency response까지

단계마다 위험 요소, 위험도 평가, 관리 조치가 있고, 작업자 서명란도 포함됩니다.

에디터 무료로 써 보기 이 템플릿 받기

브라우저에서 보이는 모습

이 템플릿 받기

무료로 가입한 뒤 받는 방법을 선택하세요. 회사 정보는 자동으로 채워집니다.

유료 요금제에 포함
요금제의 템플릿 크레딧을 사용하세요. 이 템플릿은 1입니다.
요금제와 가격 비교
한 번 구매하기
$89.95 한 번 결제로 계속 소유합니다. 무료 요금제에서도 사용할 수 있습니다.

에디터 무료로 써 보기 무료 가입

가입에 카드가 필요 없습니다. 얼리 액세스 회원은 모든 요금제에서 30% 할인을 받습니다.

다루는 내용

작업 단계 19개

PlanningPlan the crew, licences and power line liaison.
Working aloneSet up check-ins and a buddy for working alone.
Check weather conditions & prepareCheck the weather and prepare for heat and cold.
Road travel to site & site operationInspect the telehandler and drive it safely to and around the site.
Arrival on-site & assess onsite conditionsAssess the site on arrival and complete a JSA.
Site set-upSet up exclusion zones, stable ground and power line clearances.
EnvironmentControl noise, waste, fuel and other environmental impacts.
HousekeepingKeep the area clean and mount and dismount the cab safely.
Manual tasksManage fatigue, seating and lifting posture.
Establish a communication protocolSet up communication with ground workers and other plant.
Pre-lift assessmentCheck load charts, the load and wind limits before lifting.
Lifting & moving loadsLift, move and place loads safely.
Working outside the cabin near powered mobile plantStay clear of mobile plant, lasers and noise outside the cabin.
Changing attachmentsChange attachments and hydraulic connections safely.
Operations with hydraulic attachmentsUse hydraulic attachments only as intended.
Fuelling the plantRefuel the plant safely.
Onsite maintenanceSecure the plant for maintenance and deal with hydraulic leaks safely.
On completionPark, shut down and secure the telehandler.
Emergency responseRespond to emergencies and report incidents.