얼리 액세스 혜택:얼리 액세스: 30% 할인, 구독을 유지하는 동안 계속.

혜택 받기

템플릿 문서는 영어로 작성되어 있습니다.

에디터 무료로 써 보기

Windshield Replacement - Standard Vehicles

SWMS · SWMS-10671

Windshield Replacement - Standard Vehicles SWMS 템플릿 미리보기
  • 작업 단계 7개
  • 버전 2
  • Miscellaneous
  • 어떤 휴대폰에서든 읽기 가능

This Safe Work Method Statement (SWMS) provides guidance on safely replacing vehicle windshields, at the workshop or at sites away from it.

It takes your crew through each step: arriving on-site and assessing conditions, managing the environment, housekeeping, manual tasks, removing and replacing the windshield, completion and emergency response. Each step lists its hazards, controls and who is responsible.

It suits businesses involved in automotive repair, particularly windshield replacement, including automotive technicians, workshop managers, safety officers and contractors working on vehicle maintenance.

Written by SafetyDocs safety experts, who have been writing safety documents since 2004.

Windshield Replacement - Standard Vehicles SWMS 미리 보기

Windshield Replacement - Standard Vehicles

SWMSVersion 2
Company doing the work
[Company]
Business contact and phone
—
Responsible person (for monitoring SWMS and work)
—
Responsible person's phone
—
Responsible person's signature
—
Date signed
—
Principal Contractor (PC)
—
PC Address
—
PC phone
—
Date SWMS provided to PC
—
Job Site Address
—
Part of a construction project
—

Site management plan

If the work is part of a construction project, this SWMS must align with requirements of the Site Management Plan in place for the Construction Project.

High-risk construction work

This work activity involves the following “High-Risk Construction Work” (HRCW - identified in the Job Task column)

  • Traffic CorridorsWork carried out adjacent to a road, railway or shipping lane, traffic corridor

Planning and preparation

Planning/preparation

  • Liaise with Principal Contractor to identify on-site safety systems and procedures

  • Establish supervisory and communication arrangements

  • Principal contractor to confirm emergency response procedures are in place.

Hold points

  • Hold points identified and signed off before continuing work. (specify the hold points)

Training/licence

  • All workers to have a General Construction Induction Card

  • Relevant workers have relevant certificates of competency, licenses, and training. Specify on the SWMS Sign-off for each worker.

  • Trained First Aider on site

  • All workers trained in site-specific emergency and evacuation procedures, SWMS, safe work procedures, and safety data sheets.

Worker duties and responsibilities

  • Fit condition for work, i.e., no signs of fatigue, alcohol or drugs

  • Attend all site inductions/briefings

  • Comply with all site requirements, e.g. PPE, Traffic Management Plans (TMP)

  • Only carry out work related to the contract

  • Inspect completed work and report possible safety, environmental and quality matters to the supervisor.

Monitor/review

  • All people involved in the task must have this SWMS communicated to them before work commences

  • SWMS to be reviewed and amended if necessary, in consultation with relevant people after any near miss or incident

  • If additional site hazards identified, review this SWMS and amend control measures to suit

  • People, including workers, contractors and sub-contractors, affected by the revisions to this SWMS, must be informed ASAP

  • Give the principal contractor a copy of the revised SWMS

  • The site supervisor to monitor works against the controls stated in this SWMS

  • SWMS must be kept on-site and made available for inspection or review

  • Keep a record of this SWMS until the job is complete or for two years if involved in a notifiable incident

  • Regardless of any other factor, the person in control of the workplace must review this SWMS at least annually.

Site-specific notes

(add notes specific to this site)

Legislation and codes of practice

None listed.

Personal protective equipment

  • Foot Protection
  • High Visibility
  • Hand Protection

Do not wear rings, watches or jewellery that may become entangled. Long and loose hair must be tied back.

Job steps, hazards and controls

  • Work activity

    Arrival on-site & assess onsite conditions when exchanging windshields at sites other than your workshop

    • Hazard

      Personal injury, property damage &/or environmental incident

      Before controls3 High
      Controls

      • Work vehicle should be positioned in a safe location, clear of traffic/vehicles/pedestrians during equipment delivery and materials removal (deploy physical barriers, caution signs as necessary)

      • Do not park illegally

      • Identify and obey all safety-related signage (check site entry requirements)

      • Report to Site Supervisor

      • Undertake a site-specific induction, including training in communication with other operators

      • Assess mobile phone reception

      • The worksite is exactly as detailed in Terms of Agreement or contract

      • Complete a JSA specifying the control measures unanticipated hazards

      • Sites where the public may be present

        • Provide and maintain suitable access/egress for pedestrians where required. Include:

          • Physical barriers to ensure persons do not enter within 5m of worksite

          • Caution signs

          • Stop-go baton operators

        • Establish a clearance zone for the work area (Examples: bollards, caution signs, tape etc.)

        • Ensure safe travel paths when re-directing pedestrians. Keep pedestrians and vehicles separated.

      After controls2 Moderate
      Responsible
      • Supervisorto check the site and conduct JSA where necessary
    • Hazard

      Struck by vehicle

      Before controls4 Acute
      Controls

      • When conducting repairs adjacent to a road:

        • Comply with local laws and permits

        • Erect any barriers & signage necessary to keep others safe and aware

        • Always wear a hi-vis. vest when undertaking any roadside repairs

        • Always use a spotter.

      After controls2 Moderate
      Responsible
      • Supervisorto check the site and conduct JSA where necessary
    • Hazard

      Toxic fumes, Fire

      Before controls4 Acute
      Controls

      • Adequate ventilation (prevent carbon monoxide build-up and exposure to solvent fumes)

      • Separated from other operations

      • Fire Extinguishers – accessible & serviced.

      After controls2 Moderate
      Responsible
      • Supervisorto check the site and conduct JSA where necessary

IR before controls · RR after controls1 LLow2 MModerate3 HHigh4 AAcute

Overall risk after controls2 MModeratethe highest rating after controls

작업 단계 6개 더: Environment부터 Emergency response까지

단계마다 위험 요소, 위험도 평가, 관리 조치가 있고, 작업자 서명란도 포함됩니다.

에디터 무료로 써 보기이 템플릿 받기
미리 보기 방식

브라우저에서 보이는 모습

이 템플릿 받기

무료로 가입한 뒤 받는 방법을 선택하세요. 회사 정보는 자동으로 채워집니다.

  • 유료 요금제에 포함

    요금제의 템플릿 크레딧을 사용하세요. 이 템플릿은 1입니다.

    요금제와 가격 비교

  • 한 번 구매하기

    $89.95 한 번 결제로 계속 소유합니다. 무료 요금제에서도 사용할 수 있습니다.

에디터 무료로 써 보기무료 가입

가입에 카드가 필요 없습니다. 얼리 액세스 회원은 모든 요금제에서 30% 할인을 받습니다.

다루는 내용

작업 단계 7개

  1. Arrival on-site & assess onsite conditions when exchanging windshields at sites other than your workshopEvaluate site conditions for safety and compliance before commencing work.
  2. EnvironmentManage environmental impacts, including waste disposal and spill response.
  3. House keepingKeep the work area clean and organised to prevent slips, trips and falls.
  4. Manual tasksUse ergonomic practices to avoid musculoskeletal disorders when lifting and handling.
  5. Windshield removal & replacementRemove and install windshields safely.
  6. On completionDispose of damaged materials and confirm all workers have signed out.
  7. Emergency responseRespond to injuries, environmental damage or other emergencies.

다루는 위험 요소

리뷰

아직 리뷰가 없습니다.

이 작업 관련 가이드

모두 보기

템플릿 이용 방법

먼저 써 보고 결제하세요.

  1. 무료 미리 보기

    모든 템플릿의 작업 단계, 위험 요소, 첫 번째 작업 내용을 자유롭게 볼 수 있습니다. 가입이 필요 없습니다.

  2. 에디터 써 보기

    컴퓨터나 휴대폰에서 데모 SWMS에 회사, 작업, 현장 정보를 넣어 보세요.

  3. 무료 가입

    입력한 정보와 로고가 그대로 옮겨집니다. 이 템플릿이 정보가 채워진 상태로 열립니다.

  4. 크레딧 사용 또는 한 번 구매

    유료 요금제에는 매달 템플릿 크레딧이 포함됩니다. 또는 이 템플릿만 구매해 계속 소유하세요.