प्रारम्भिक पहुँच अफर:प्रारम्भिक पहुँच: 30% छुट, सदस्यता रहेसम्म.

अफर लिनुहोस्

टेम्प्लेट कागजातहरू अंग्रेजीमा लेखिएका छन्।

एडिटर निःशुल्क चलाएर हेर्नुहोस्

Concrete-Natural Stone Bench-top Installation

SWMS · SWMS-10257

Concrete-Natural Stone Bench-top Installation SWMS टेम्प्लेटको पूर्वावलोकन
  • कामका 10 चरण
  • 163 पटक किनिएको
  • संस्करण 11
  • Bricklaying - Masonry
  • जुनसुकै फोनमा पढ्न मिल्छ

This Concrete-Natural Stone Bench-top Installation Safe Work Method Statement (SWMS) provides a step-by-step guide to safely install concrete and natural stone benchtops, in compliance with Australian safety regulations.

It covers 10 job steps, from training on the health effects of respirable crystalline silica, arriving on site and setting up the work area to moving and placing the bench-top, cutting and grinding, fixing it to the cabinets, completion and emergency response.

It includes controls for high-risk construction work, silica dust, electrical and cutting hazards, noise, manual handling, adhesives and the environment.

It suits businesses and contractors who install concrete and natural stone benchtops.

Concrete-Natural Stone Bench-top Installation SWMS को पूर्वावलोकन

Concrete-Natural Stone Bench-top Installation

SWMSVersion 11
Company doing the work
[Company]
Business contact and phone
—
Responsible person (for monitoring SWMS and work)
—
Responsible person's phone
—
Responsible person's signature
—
Date signed
—
Principal contractor (PC)
[Principal contractor]
PC address
—
PC phone
[PC phone]
Date SWMS provided to PC
—
Job site address
[Site address]
Part of a construction project
—

Site management plan

If the work is part of a construction project, this SWMS must align with the Site Management Plan requirements in place for the Construction Project.

High-risk construction work

This work activity involves the following “High-Risk Construction Work” (HRCW - identified in the Job Task column)

  • Hazardous AtmosphereWork in an area that may have a contaminated or flammable atmosphere

Planning and preparation

Planning/preparation

  • Liaise with Principal Contractor to identify on-site safety systems and procedures

  • Establish supervisory and communication arrangements

  • Principal contractor to confirm emergency response procedures are in place.

Hold points

Hold points identified and signed off before continuing work. (specify the hold points)

Training and licences

  • All workers to have a General Construction Induction Card

  • Relevant workers have relevant certificates of competency, licenses, and training.

    • Specify on the SWMS Sign-off for each worker.

  • Trained First Aider on site

  • All workers trained in site-specific emergency and evacuation procedures, SWMS, safe work procedures, and safety data sheets.

Worker duties and responsibilities

  • Fit condition for work, i.e., no signs of fatigue, alcohol or drugs

  • Attend all site inductions/briefings

  • Comply with all site requirements, e.g. PPE, Traffic Management Plans (TMP)

  • Only carry out work related to the contract

  • Inspect completed work and report possible safety, environmental and quality matters to the supervisor.

Monitoring and review

  • All people involved in the task must have this SWMS communicated to them before work commences

  • SWMS to be reviewed and amended if necessary, in consultation with relevant people after any near miss or incident

  • If additional site hazards identified, review this SWMS and amend control measures to suit

  • People, including workers, contractors and sub-contractors, affected by the revisions to this SWMS, must be informed ASAP

  • Give the principal contractor a copy of the revised SWMS

  • The site supervisor to monitor works against the controls stated in this SWMS

  • SWMS must be kept on-site and made available for inspection or review

  • Keep a record of this SWMS until the job is complete or for two years if involved in a notifiable incident

  • Regardless of any other factor, the person in control of the workplace must review this SWMS at least annually.

Site-specific notes

Legislation and codes of practice

None listed.

Personal protective equipment

  • Foot Protection
  • Hearing Protection
  • High Visibility
  • Eye Protection
  • Hand Protection
  • Protective Clothing
  • Breathing Protection

Do not wear rings, watches or jewellery that may become entangled. Long and loose hair must be tied back.

Job steps, hazards and controls

  • Work activity

    Provide training on the health effects associated with RCS

    • Hazard

      Exposure to respirable crystalline silica (RCS) – dust inhalation

      Before controls4 Acute
      Controls

      • Training and Information provided to workers on respirable crystalline silica (RCS) should include:

        • Identification of RCS dust through Safety Datasheet (SDS) or labels

        • Dust exposure prevention strategies

        • Checking controls are working and using them

        • When and how to use respiratory protective equipment and what to do if something goes wrong (Including worker respirator fit and check processes).

      After controls2 Moderate
      Responsible
      • Supervisor

IR before controls · RR after controls1 LLow2 MModerate3 HHigh4 AAcute

Overall risk after controls2 MModeratethe highest rating after controls

कामका थप 9 चरण, Arrival on-site & assess onsite conditions देखि Emergency response सम्म

हरेकमा खतरा, जोखिम रेटिङ र नियन्त्रण, साथै तपाईंको टोलीको साइन-अन।

एडिटर निःशुल्क चलाएर हेर्नुहोस्यो टेम्प्लेट लिनुहोस्
यसरी पूर्वावलोकन गर्नुहोस्

ब्राउजरमा यो कस्तो देखिन्छ

यो टेम्प्लेट लिनुहोस्

निःशुल्क साइन अप गर्नुहोस्, अनि कसरी लिने छान्नुहोस्। तपाईंको कम्पनीको विवरण आफैँ भरिन्छ।

  • सशुल्क प्लानहरूमा समावेश

    आफ्नो प्लानका टेम्प्लेट क्रेडिट प्रयोग गर्नुहोस्। यसको मूल्य 1 हो।

    प्लान र मूल्य तुलना गर्नुहोस्

  • एकपटक किन्नुहोस्

    $89.95 एकपटक तिरेपछि सधैँ तपाईंकै। निःशुल्क प्लानमा पनि चल्छ।

एडिटर निःशुल्क चलाएर हेर्नुहोस्निःशुल्क साइन अप गर्नुहोस्

साइन अप गर्न कार्ड चाहिँदैन। प्रारम्भिक पहुँच सदस्यहरूले जुनसुकै प्लानमा 30% छुट पाउँछन्।

यसले के समेट्छ

कामका 10 चरण

  1. Provide training on the health effects associated with RCSTrain workers on silica dust, its controls and RPE use
  2. Arrival on-site & assess onsite conditionsPark safely, report to the supervisor and assess the site
  3. Work area set-upSet up the exclusion zone and check the cabinets can take the weight
  4. EnvironmentControl noise, dust, waste and vehicle movement
  5. HousekeepingKeep the work area clean, lit and free of trip hazards
  6. Benchtop transfer & placementMove and place the bench-top with lifting equipment and team lifts
  7. Cutting & grinding at siteCut and grind with electrical, dust, cutting and noise controls
  8. Fixing the bench-top to cabinetsFix the bench-top to the cabinets and handle adhesives safely
  9. On completionRemove barricades, clean up silica dust and sign out
  10. Emergency responseCall 000 and follow site emergency procedures

यसले समेट्ने खतराहरू

समीक्षाहरू

अहिलेसम्म कुनै समीक्षा छैन।

यो कामका लागि गाइडहरू

सबै हेर्नुहोस्

टेम्प्लेटहरू कसरी काम गर्छन्

यसलाई पैसा तिर्नुअघि नै चलाएर हेर्नुहोस्।

  1. निःशुल्क पूर्वावलोकन

    हरेक टेम्प्लेटका कामका चरण, खतरा र पहिलो काम पढ्न खुला छन्। साइन अप चाहिँदैन।

  2. एडिटर चलाएर हेर्नुहोस्

    कम्प्युटर वा फोनमा, डेमो SWMS लाई आफ्नो कम्पनी, काम र साइटअनुसार मिलाउनुहोस्।

  3. निःशुल्क साइन अप गर्नुहोस्

    तपाईंको विवरण र लोगो सर्छन्। यो टेम्प्लेट विवरण भरिएरै खुल्छ।

  4. क्रेडिट प्रयोग गर्नुहोस् वा एकपटक किन्नुहोस्

    सशुल्क प्लानहरूमा हरेक महिना टेम्प्लेट क्रेडिट आउँछ। वा सधैँका लागि यो एउटा किन्नुहोस्।