Ưu đãi truy cập sớm:Truy cập sớm: giảm 30%, chừng nào bạn vẫn còn đăng ký.

Nhận ưu đãi

Các tài liệu mẫu được soạn bằng tiếng Anh.

Wheel Nut Tensioning

SOP · SOP-60220

Xem trước mẫu SOP Wheel Nut Tensioning
  • Đã được mua 31 lần
  • Phiên bản 4
  • Power Tools & Equipment
  • Đọc được trên mọi điện thoại

The Wheel Nut Tensioning Safe Operating Procedure (SOP) provides a structured approach so all safety measures are adhered to, reducing risks and enhancing operational efficiency.

It covers the hazards (falling or rolling wheels, burns, vehicle movement, manual handling and poor housekeeping), operator training and competency, inspecting the wheel and work area, tools and equipment, the step-by-step tensioning sequence, manual handling, compressed air safety and tyre storage.

A training and induction register records each worker's induction, training and competency.

Xem trước SOP Wheel Nut Tensioning

Wheel Nut Tensioning

SOPVersion 4

Acronyms

LOTO - Lockout/Tagout.
PPE - Personal Protective Equipment.
SOP - Safe Operating Procedure.

Hazards

What can cause harm?

  • Falling/rolling wheels

  • Burns

  • Vehicle movement

  • Manual Handling

  • Poor housekeeping

Gloved hands tightening a wheel nut on a car wheel

Pre-operational inspection

Visually inspect the wheel

Check wheel rims, studs, and wheel nuts for damage to the following:

  • Cracks or other damage

  • Check the wheel nuts are not rounded

  • Stud elongation or excessive rust

  • Crush, thinned, or seized threads

Inspect the intended work area

Ensure:

  • No electrical hazards or compressed air hazards

  • Safe access and egress - sufficient lighting and visibility

  • Remove all objects that may cause a hazard

Thêm 6 phần, từ Precautions đến Employee training and induction register

Được soạn đầy đủ, sẵn sàng điền thông tin doanh nghiệp của bạn.

Xem trước dạng

Hiển thị thế nào trên trình duyệt

Lấy mẫu này

Đăng ký miễn phí, rồi chọn cách bạn muốn lấy. Thông tin công ty của bạn sẽ được điền sẵn.

  • Có trong các gói trả phí

    Dùng lượt mở mẫu trong gói dịch vụ của bạn. Mẫu này cần 1 lượt.

    So sánh các gói và giá
  • Mua một lần

    $89.95 trả một lần, và mẫu là của bạn mãi mãi. Dùng được cả với gói Miễn phí.

Không cần thẻ để đăng ký. Thành viên truy cập sớm được giảm 30% cho mọi gói.

Nội dung bao gồm

9 phần

  1. Hazards
  2. Pre-operational inspection
  3. Precautions
  4. Personal protective equipment
  5. Tools and equipment
  6. Operation
  7. Shutdown / after use
  8. Employee training and induction register

Cùng với định nghĩa

Đánh giá

Chưa có đánh giá nào.

Xem tất cả

Cách các mẫu hoạt động

Dùng thử trước khi trả tiền.

  1. Xem trước miễn phí

    Các bước công việc, mối nguy và nhiệm vụ đầu tiên của mọi mẫu đều mở để đọc. Không cần đăng ký.

  2. Thử trình soạn thảo

    Chỉnh một SWMS demo theo công ty, công việc và công trường của bạn, trên máy tính hoặc điện thoại.

  3. Đăng ký miễn phí

    Thông tin và logo của bạn được chuyển sang. Mẫu này sẽ mở ra với thông tin đã điền sẵn.

  4. Dùng một lượt hoặc mua một lần

    Các gói trả phí có lượt mở mẫu mỗi tháng. Hoặc mua mẫu này để giữ lại.