Fire and explosion班前安全会讲稿

它是什么

Fuel, flammable gases or vapours, dust or hot work igniting and causing fire, burns or explosion.

要检查的控制措施，最有效的排在前面

1. Substitute non-flammable products where possible, and keep only small quantities of flammable liquids and gases at the work area.
2. Remove or isolate ignition sources, and use intrinsically safe equipment where flammable atmospheres may occur.
3. Store flammable liquids in suitable containers and flammable liquids cabinets, away from heat, oxidisers and exits.
4. Issue hot work permits, clear combustibles from the area and keep a fire watch during and after hot work.
5. Refuel plant and equipment with engines off and cooled, away from hot work and other ignition sources.
6. Keep suitable fire extinguishers close to the work and train workers to use them.

在工作中哪些环节会遇到

SafetyDocs 模板中涉及fire and explosion的工作步骤：

• Discharging fire extinguisher for service requirementsFollow the SDS and never discharge towards a person来自 Fire Extinguisher Installation - Maintenance
• Fire Extinguisher InstallationLocate wall services, control dust, silica and asbestos, and mount extinguishers to AS 2444来自 Fire Extinguisher Installation - Maintenance
• Fire Extinguisher MaintenanceService extinguishers to the manufacturer and AS 1851 and complete the logbook来自 Fire Extinguisher Installation - Maintenance
• Make safe – fire damageMake fire-damaged areas safe来自 Make Safe
• Work area set-upBarricade the work area and control electrical, fire, debris and silica dust hazards来自 Concrete Grinding and Polishing

给工人的问题

1. 今天这项工作中，哪里可能会遇到fire and explosion？
2. 今天的工作中有没有以下内容：Discharging fire extinguisher for service requirements; Fire Extinguisher Installation; Fire Extinguisher Maintenance？
3. 最有效的控制措施是：“Substitute non-flammable products where possible, and keep only small quantities of flammable liquids and gases at the work area”。我们这里能做到吗？如果不能，为什么？
4. 这个工地上有哪些针对fire and explosion的控制措施缺失或不起作用？
5. 你会在什么情况下因为fire and explosion停工？你会告诉谁？
6. 在这项工作中，我们怎么报告危险、险情或事故？