Oferta de acceso anticipado:Acceso anticipado: 30% de descuento, mientras sigas suscrito.

Aprovechar la oferta

Charla de seguridad sobre Airborne dust

Por ahora, esta página está en inglés.

Léela en voz alta en la charla antes de empezar o en una reunión de seguridad, comenten las preguntas y haz que todos firmen. Está hecha a partir de nuestra página sobre airborne dust y de las 255 plantillas de SafetyDocs que lo cubren.

Obra
Fecha
Presentada por

Qué es

Dust raised by work, plant movement or dried material that can be breathed in or spread beyond the site.

Controles que hay que revisar, del más eficaz al menos eficaz

  1. Choose work methods that create less dust, such as wet cutting, pre-wetting materials or using pre-cut components.
  2. Fit on-tool dust extraction connected to a suitable vacuum, and use water carts or sprays on haul roads and stockpiles.
  3. Clean up with a suitable vacuum or wet methods rather than dry sweeping or blowing dust with compressed air.
  4. Set up screens or barriers, and stop dusty work in strong winds that would carry dust beyond the site boundary.
  5. Wear respiratory protection suited to the dust, and have tight-fitting respirators fit-tested to the wearer.

Dónde aparece en el trabajo

Pasos de trabajo de plantillas de SafetyDocs que tratan airborne dust:

  • Dust controlControl dust with water and an enclosed cabinDe Civil Drain Clearing
  • Controlling silica dustControl silica dust with an enclosed cabin and air filteringDe Road Profiler Machine
  • Cutting materials & identification of respirable crystalline silica dustCut materials with water or HEPA dust controlDe Cladding
  • Dust suppression and ventilationControl lead dust with suppression and ventilationDe Working around Lead Residue-Dust
  • General workplace dust controlWater suppression, ventilation, housekeeping without compressed air, and the 30-day RPE trigger.De Silica Dust

Preguntas para el equipo

  1. ¿Dónde podría aparecer airborne dust hoy en este trabajo?
  2. ¿Alguna de estas tareas forma parte del trabajo de hoy?: Dust control; Controlling silica dust; Cutting materials & identification of respirable crystalline silica dust
  3. El control más eficaz es: «Choose work methods that create less dust, such as wet cutting, pre-wetting materials or using pre-cut components». ¿Podemos hacerlo aquí? Si no, ¿por qué no?
  4. ¿Qué controles para airborne dust faltan o no funcionan en esta obra?
  5. ¿Cuándo detendrías el trabajo por airborne dust, y a quién avisarías?
  6. ¿Cómo informamos de un peligro, un cuasi accidente o un incidente en este trabajo?

Registro de firmas

Todos los asistentes firman abajo. Guárdalo con tus registros de charlas de seguridad.

NombreEmpresaFirma

Un punto de partida para una charla, no un SWMS ni una evaluación de riesgos. Añade lo que sea propio de tu obra y tu equipo.