عرض الوصول المبكر:وصول مبكر: خصم 30%، ما دمت مشتركًا.

احصل على العرض

مستندات النماذج مكتوبة باللغة الإنجليزية.

جرّب المحرّر مجانًا
حزمة توفير · 19 نماذج

Electrician's

حزمة توفير · PACK-50047

معاينة نموذج حزمة توفير Electrician's
  • 19 نماذج
  • 19 بسعر 13
  • يصل في مجلد واحد في المكتبة

A set of 19 SWMS for electricians: switchboard installation, cable ladder, tray and conduit, electrical renovations, appliance and equipment repair, trenching and confined spaces.

Each SWMS is the same one sold on its own, so you get every update to it. Together they cost 13 template credits instead of 19.

معاينة SWMS Height Access Equipment

Height Access Equipment

SWMSVersion 11
Company doing the work
[Company]
Business contact and phone
—
Responsible person (for monitoring SWMS and work)
—
Responsible person's phone
—
Responsible person's signature
—
Date signed
—
Principal contractor (PC)
[Principal contractor]
PC address
—
PC phone
[PC phone]
Date SWMS provided to PC
—
Job site address
[Site address]
Part of a construction project
—

Site management plan

If the work is part of a construction project, this SWMS must align with requirements of the Site Management Plan in place for the Construction Project.

High-risk construction work (HRCW)

This work activity involves the following “High-Risk Construction Work” (HRCW - identified in the Job Task column)

  • FallsRisk of a person falling more than two metres. Note: in some jurisdictions this is three metres.
  • Mobile PlantWork in an area where there is any movement of powered mobile plant

Working with a risk of a fall over 2 metres

The fall from height hierarchy of control level considered when establishing controls:

  • L1Work on the ground or solid construction, not chosen
  • L2Use a passive fall restraint system, e.g. guard rails, scaffolding, EWP, not chosen
  • L3Use a work positioning system, e.g. travel restraint, rope access, not chosen
  • L4Use a fall arrest system, e.g. safety harness, catch platforms, not chosen
  • L5Implement administrative controls, e.g. signage or instruction, not chosen

No level has been chosen yet.

Planning and preparation

  • Liaise with Principal Contractor to identify on-site safety systems and procedures

  • Establish supervisory and communication arrangements

  • Principal contractor to confirm emergency response procedures are in place.

Hold points

  • Hold points identified and signed off before continuing work. (specify the hold points)

Training/licence

  • All workers to have a General Construction Induction Card

  • Relevant workers have relevant certificates of competency, licenses, and training. Specify on the SWMS Sign-off for each worker.

  • Trained First Aider on site

  • All workers trained in site-specific emergency and evacuation procedures, SWMS, safe work procedures, and safety data sheets.

Worker duties and responsibilities

  • Fit condition for work, i.e., no signs of fatigue, alcohol or drugs

  • Attend all site inductions/briefings

  • Comply with all site requirements, e.g. PPE, Traffic Management Plans (TMP)

  • Only carry out work related to the contract

  • Inspect completed work and report possible safety, environmental and quality matters to the supervisor.

Monitor/review

  • All people involved in the task must have this SWMS communicated to them before work commences

  • SWMS to be reviewed and amended if necessary, in consultation with relevant people after any near miss or incident

  • If additional site hazards identified, review this SWMS and amend control measures to suit

  • People, including workers, contractors and sub-contractors, affected by the revisions to this SWMS, must be informed ASAP

  • Give the principal contractor a copy of the revised SWMS

  • The site supervisor to monitor works against the controls stated in this SWMS

  • SWMS must be kept on-site and made available for inspection or review

  • Keep a record of this SWMS until the job is complete or for two years if involved in a notifiable incident

  • Regardless of any other factor, the person in control of the workplace must review this SWMS at least annually.

Site-specific notes

Legislation and codes of practice

Australian Government

Acts and regulations

  • Work Health and Safety Act 2011
  • Work Health and Safety Regulations 2011

Codes of practice

  • Work Health and Safety (First Aid in the Workplace) Code of Practice 2015
  • Work Health and Safety (How to Manage Work Health and Safety Risks) Code of Practice 2015
  • Work Health and Safety (Managing the Work Environment and Facilities) Code of Practice 2015
  • Work Health and Safety (Construction Work) Code of Practice 2015

Australian Capital Territory

Acts and regulations

  • Work Health and Safety Act 2011
  • Work Health and Safety Regulation 2011

Codes of practice

  • Work Health and Safety (First Aid in the Workplace Code of Practice) Approval 2020
  • Work Health and Safety (How to Manage Work Health and Safety Risks Code of Practice) Approval 2025
  • Work Health and Safety (Managing the Work Environment and Facilities) Code of Practice 2025
  • Work Health and Safety (Construction Work Code of Practice) Approval 2025

Queensland

Acts and regulations

  • Work Health and Safety Act 2011
  • Work Health and Safety Regulation 2011

Codes of practice

  • First Aid in the Workplace Code of Practice 2021
  • How to Manage Work Health and Safety Risks Code of Practice 2021
  • Managing the Work Environment and Facilities Code of Practice 2021

New South Wales

Acts and regulations

  • Work Health and Safety Act 2011
  • Work Health and Safety Regulation 2025

Codes of practice

  • First Aid in the workplace code of practice 2020
  • How to manage work health and safety risks code of practice 2019
  • Managing the work environment and facilities code of practice 2019
  • Construction work code of practice 2019

Northern Territory

Acts and regulations

  • Work Health and Safety (National Uniform Legislation) Act 2011
  • Work Health and Safety (National Uniform Legislation) Regulations 2011

Codes of practice

  • First aid in the workplace – Code of practice 2022
  • How to manage work health and safety risks - Code of practice 2026
  • Managing the work environment and facilities - Code of practice 2026
  • Construction work - code of practice 2026

South Australia

Acts and regulations

  • Work Health and Safety Act 2012
  • Work Health and Safety Regulation 2012

Codes of practice

  • First Aid in the Workplace: Code of practice 2020
  • How to Manage Work Health and Safety Risks: Code of practice 2020
  • Managing the Work Environment and Facilities: Code of practice 2020
  • Construction work Code of Practice 2024

Tasmania

Acts and regulations

  • Work Health and Safety Act 2012
  • Work Health and Safety Regulations 2022

Codes of practice

  • First Aid in the Workplace - Code of practice 2020
  • How to Manage Work Health and Safety Risks - Code of practice 2024
  • Managing the Work Environment and Facilities - Code of practice 2024
  • Construction Work - Code of practice 2024

Western Australia

Acts and regulations

  • Work Health and Safety Act 2020
  • Work Health and Safety (General) Regulations 2022

Codes of practice

  • First aid in the workplace - Code of Practice 2022
  • How to manage work health and safety risks – Code of practice 2022
  • Managing the work environment and facilities – Code of practice 2022
  • Construction work – Code of practice 2022

Victoria

Acts and regulations

  • Occupational Health and Safety Act 2004
  • Occupational Health and Safety Regulations 2017

Personal protective equipment (PPE)

  • Foot Protection
  • Head Protection
  • Eye Protection
  • Hand Protection
  • Protective Clothing
  • Sun Protection
  • Safety Harness

Do not wear rings, watches or jewellery that may become entangled. Long and loose hair must be tied back.

Job steps, hazards and controls

  • Work activity

    Arrival on-site & assess onsite conditions

    • Hazard

      Personal injury, property damage &/or environmental incident

      Before controls3 High
      Controls

      • The vehicle should be positioned in a safe location, clear of traffic/vehicles/pedestrians during equipment delivery and materials removal (deploy physical barriers, caution signs as necessary)

      • Do not park illegally

      • Identify and obey all safety-related signage (check site entry requirements)

      • Report to Site Supervisor

      • Ensure site-specific induction undertaken

      • Assess mobile phone reception

      • The worksite is exactly as detailed in Terms of Agreement or contract

      • Complete a JSA specifying the control measures for unanticipated hazards.

      After controls2 Moderate
      Responsible
      • SupervisorCheck the site and conduct JSA where necessary

IR before controls · RR after controls1 LLow2 MModerate3 HHigh4 AAcute

Overall risk after controls2 MModeratethe highest rating after controls

16 خطوات عمل أخرى، من Work area set-up إلى Emergency response

لكل منها مخاطرها وتقييمات خطورتها وإجراءات التحكم فيها، إضافة إلى توقيع طاقمك.

جرّب المحرّر مجانًااحصل على حزمة التوفير هذه
المعاينة بصيغة

كيف يبدو في المتصفح

احصل على حزمة التوفير هذه

سجّل مجانًا، ثم اختر الطريقة التي تناسبك. يُضاف كل مستند إلى مكتبتك، في مجلد يحمل اسم الحزمة.

  • مشمول في الخطط المدفوعة

    استخدم أرصدة النماذج من خطتك. تكلفة هذه الحزمة 13 بدلًا من 19.

    قارن الخطط والأسعار

  • اشترِه مرة واحدة

    $1,169.35 $1,709.05 تُدفع مرة واحدة، ويبقى ملكك. يعمل على الخطة المجانية أيضًا.

جرّب المحرّر مجانًاسجّل مجانًا

لا حاجة إلى بطاقة للتسجيل. يحصل أعضاء الوصول المبكر على خصم 30% على أي خطة.

ما يتضمنه

  1. Height Access Equipment

    SWMS · 17 خطوات عمل

    Height Access Equipment SWMS: 17 job steps covering fixed and mobile scaffolds, trestles, extension, platform and vertical ladders, and safety harnesses.

    يُباع أيضًا منفردًا
  2. Switchboard Installation

    SWMS · 14 خطوات عمل

    SWMS for installing switchboards, covering energised electrical work, arc flash, silica and asbestos controls, ladders and emergency response.

    يُباع أيضًا منفردًا
  3. Asbestos Awareness

    SWMS · 4 خطوات عمل

    Asbestos Awareness SWMS: 4 job steps for identifying and reporting asbestos-containing materials and responding to accidental disturbance.

    يُباع أيضًا منفردًا
  4. Mobile Plant Working Near-Around

    SWMS · 8 خطوات عمل

    SWMS for people working near powered mobile plant on construction sites: traffic management, pedestrian rules, passengers, noise, lasers and emergency response.

    يُباع أيضًا منفردًا
  5. Cable Ladder Tray-Conduit Installation

    SWMS · 12 خطوات عمل

    Cable ladder, tray and conduit installation SWMS: 12 job steps covering services, ladders and scaffold, tools, silica dust, hot work and emergencies.

    يُباع أيضًا منفردًا
  6. Electrical Renovations

    SWMS · 20 خطوات عمل

    Electrical Renovations SWMS: 20 job steps covering power isolation, switchboards, rough-in, fitting appliances, commissioning and emergencies.

    يُباع أيضًا منفردًا
  7. Trench Excavation

    SWMS · 15 خطوات عمل

    Trench Excavation SWMS: 15 job steps covering excavating and working in trenches over 1.5 m deep, from planning to emergency response.

    يُباع أيضًا منفردًا
  8. Appliances-Equipment Electrical Repair

    SWMS · 14 خطوات عمل

    Appliances-Equipment Electrical Repair SWMS: 14 job steps for de-energised repair of appliances and equipment, from LOTO and hot work to testing and return to service.

    يُباع أيضًا منفردًا
  9. Confined Space Work

    SWMS · 10 خطوات عمل

    A SWMS for confined space work: pre-entry risk assessment, entry permits, standby people, ventilation and gas testing, isolation and emergency retrieval.

    يُباع أيضًا منفردًا
  10. Risers Working In

    SWMS · 12 خطوات عمل

    Safe work method statement for working in risers, covering 12 job steps from rescue planning and entry assessment to falls, heat stress and emergencies.

    يُباع أيضًا منفردًا
  11. EWP, Boom, Cherry Picker and Scissor Lift

    SWMS · 12 خطوات عمل

    EWP SWMS for scissor lifts, boom lifts and cherry pickers: 12 job steps, from rescue planning and set-up to working at height, fuelling and recharging.

    يُباع أيضًا منفردًا
  12. Silica Dust

    SWMS · 14 خطوات عمل

    Silica Dust SWMS: 14 job steps covering RCS dust control, wet cutting, dust extraction, RPE, the 30-day health monitoring trigger and clean-up.

    يُباع أيضًا منفردًا
  13. Working in Roof Spaces

    SWMS · 8 خطوات عمل

    SWMS for working in roof spaces, ceiling spaces and subfloors: electrical hazards, ladders, heat stress, vermin, snakes and emergency response.

    يُباع أيضًا منفردًا
  14. Electrical New Installation

    SWMS · 20 خطوات عمل

    SWMS for new electrical installations: planning, site set-up, tools, ladders, live work, excavation, switchboards, testing and emergencies.

    يُباع أيضًا منفردًا
  15. Manual Handling

    SWMS · 18 خطوات عمل

    Manual Handling SWMS: 18 job steps covering lifting and carrying, team lifts, lifting aids, sustained postures, ergonomics, driving, and people and animal handling.

    يُباع أيضًا منفردًا
  16. Cable Hauling

    SWMS · 16 خطوات عمل

    A SWMS for cable hauling near roads and in pits or manholes: the hazards and controls from training and planning to pulling cable and emergency response.

    يُباع أيضًا منفردًا
  17. Electrical Temporary Connections

    SWMS · 14 خطوات عمل

    Electrical Temporary Connections SWMS: 14 job steps from silica training and set-up to live electrical work, leads and emergency response.

    يُباع أيضًا منفردًا
  18. Low Voltage Electrical Repairs and Installations

    SWMS · 20 خطوات عمل

    SWMS for low voltage electrical repairs, maintenance and installations, including isolation, working near live parts, testing and appliances.

    يُباع أيضًا منفردًا
  19. Electrical Demolition

    SWMS · 13 خطوات عمل

    Electrical Demolition SWMS: 13 job steps covering power shutdown, removing fixtures and cabling, asbestos, ceiling spaces and working at height.

    يُباع أيضًا منفردًا

ما يغطيه

المخاطر التي يغطيها

التشريعات والمعايير التي يستند إليها

يأتي كل SWMS مع قائمة مراجع التشريعات ومدونات الممارسة الخاصة بنا.

ما توفّره

النموذجخطوات العملمنفردًا
Height Access Equipment17$89.95 · رصيد واحد
Switchboard Installation14$89.95 · رصيد واحد
Asbestos Awareness4$89.95 · رصيد واحد
Mobile Plant Working Near-Around8$89.95 · رصيد واحد
Cable Ladder Tray-Conduit Installation12$89.95 · رصيد واحد
Electrical Renovations20$89.95 · رصيد واحد
Trench Excavation15$89.95 · رصيد واحد
Appliances-Equipment Electrical Repair14$89.95 · رصيد واحد
Confined Space Work10$89.95 · رصيد واحد
Risers Working In12$89.95 · رصيد واحد
EWP, Boom, Cherry Picker and Scissor Lift12$89.95 · رصيد واحد
Silica Dust14$89.95 · رصيد واحد
Working in Roof Spaces8$89.95 · رصيد واحد
Electrical New Installation20$89.95 · رصيد واحد
Manual Handling18$89.95 · رصيد واحد
Cable Hauling16$89.95 · رصيد واحد
Electrical Temporary Connections14$89.95 · رصيد واحد
Low Voltage Electrical Repairs and Installations20$89.95 · رصيد واحد
Electrical Demolition13$89.95 · رصيد واحد
عند الشراء واحدًا تلو الآخر$1,709.05 · 19 أرصدة
ضمن هذه الحزمة$1,169.35 · 13 أرصدة توفّر $539.70

المراجعات

  • Documents are thoroughly detailed and clear to read. The only downfall is the inability to set the company and project details as the header and then copy/paste this throughout the entire list - in our case, roughly 20 SWMS. This is a little time consuming and creates a chance for human error.

    Xavier Watersعملية شراء موثّقة

كيف تعمل النماذج

جرّبه قبل أن تدفع.

  1. معاينة مجانية

    خطوات العمل والمخاطر والمهمة الأولى في كل نموذج متاحة للقراءة. دون تسجيل.

  2. جرّب المحرّر

    كيّف بيان SWMS تجريبيًا باسم شركتك ومهمتك وموقعك، على الحاسوب أو هاتفك.

  3. سجّل مجانًا

    تنتقل بياناتك وشعارك معك. وهذا النموذج يُفتح معبّأً مسبقًا.

  4. استخدم رصيدًا أو اشترِ مرة واحدة

    تتضمن الخطط المدفوعة أرصدة نماذج كل شهر. أو اشترِ هذا النموذج ليبقى لك.