عرض الوصول المبكر:وصول مبكر: خصم 30%، ما دمت مشتركًا.

احصل على العرض

مستندات النماذج مكتوبة باللغة الإنجليزية.

جرّب المحرّر مجانًا
حزمة توفير · 24 نماذج

HVAC-Refrigeration

حزمة توفير · PACK-50321

معاينة نموذج حزمة توفير HVAC-Refrigeration
  • 24 نماذج
  • 24 بسعر 13
  • يصل في مجلد واحد في المكتبة

A set of 24 SWMS for HVAC and refrigeration contractors: duct work, air conditioning installation and repairs, refrigerant gas, cool rooms, welding and confined spaces.

Each SWMS is the same one sold on its own, so you get every update to it. Together they cost 13 template credits instead of 24.

معاينة SWMS Silica Dust

Silica Dust

SWMSVersion 8
Company doing the work
[Company]
Business contact and phone
—
Responsible person (for monitoring SWMS and work)
—
Responsible person's phone
—
Responsible person's signature
—
Date signed
—
Principal contractor (PC)
[Principal contractor]
PC address
—
PC phone
[PC phone]
Date SWMS provided to PC
—
Job site address
[Site address]
Part of a construction project
—

Site management plan

If the work is part of a construction project, this SWMS must align with the requirements of the site management plan in place for the project.

High-risk construction work (HRCW)

This work involves the following high-risk construction work (HRCW), identified in the job steps:

  • Hazardous AtmosphereWork in an area that may have a contaminated or flammable atmosphere
  • Mobile PlantWork in an area where there is any movement of powered mobile plant

Working with a risk of a fall over 2 metres

The fall from height hierarchy of control level considered when establishing controls:

  • L1Work on the ground or solid construction, not chosen
  • L2Use a passive fall restraint system, e.g. guard rails, scaffolding, EWP, not chosen
  • L3Use a work positioning system, e.g. travel restraint, rope access, not chosen
  • L4Use a fall arrest system, e.g. safety harness, catch platforms, not chosen
  • L5Implement administrative controls, e.g. signage or instruction, not chosen

No level has been chosen yet.

Planning and preparation

  • Liaise with the principal contractor to identify on-site safety systems and procedures

  • Establish supervisory and communication arrangements

  • The principal contractor confirms that emergency response procedures are in place

Hold points

  • Hold points identified and signed off before continuing work: (specify the hold points)

Training and licences

  • All workers have a general construction induction card (White Card)

  • Relevant workers have relevant certificates of competency, licences and training. Specify them for each worker on the SWMS sign-off.

  • A trained first aider is on site

  • All workers are trained in site-specific emergency and evacuation procedures, this SWMS, safe work procedures and safety data sheets

Worker duties and responsibilities

  • Be in a fit condition for work, i.e. no signs of fatigue, alcohol or drugs

  • Attend all site inductions and briefings

  • Comply with all site requirements, e.g. PPE, traffic management plans (TMP)

  • Only carry out work related to the contract

  • Inspect completed work and report possible safety, environmental and quality matters to the supervisor

Monitoring and review

  • All people involved in the task must have this SWMS communicated to them before work starts

  • Review this SWMS and amend it if necessary, in consultation with relevant people, after any near miss or incident

  • If additional site hazards are identified, review this SWMS and amend the control measures to suit

  • People affected by revisions to this SWMS, including workers, contractors and subcontractors, must be informed as soon as possible

  • Give the principal contractor a copy of the revised SWMS

  • The site supervisor monitors the work against the controls in this SWMS

  • This SWMS must be kept on site and made available for inspection or review

  • Keep a record of this SWMS until the job is complete, or for two years if it was involved in a notifiable incident

  • Regardless of any other factor, the person in control of the workplace must review this SWMS at least annually

Site-specific notes

(add any notes specific to this site)

Acts, regulations and codes of practice

Australian Government

Acts and regulations

  • Work Health and Safety Act 2011
  • Work Health and Safety Regulations 2011.

Codes of practice

  • Work Health and Safety (Managing Risks of Hazardous Chemicals in the Workplace) Code of Practice 2015

Australian Capital Territory

Acts and regulations

  • Work Health and Safety Act 2011
  • Work Health and Safety Regulation 2011

Codes of practice

  • Work Health and Safety (Managing Risks of Hazardous Chemicals in the Workplace Code of Practice) Approval 2022
  • Work Health and Safety (Managing the Risks of Airborne Crystalline Silica (Silica Dust) in the Workplace Code of Practice) 2024

Queensland

Acts and regulations

  • Work Health and Safety Act 2011
  • Work Health and Safety Regulation 2011

Codes of practice

  • Managing Risks of Hazardous Chemicals in the Workplace Code of Practice 2021
  • Managing respirable crystalline silica dust exposure in construction and manufacturing of construction elements Code of Practice 2022

New South Wales

Acts and regulations

  • Work Health and Safety Act 2011
  • Work Health and Safety Regulation 2025
  • Work Health and Safety Amendment (Silica Worker Register) Regulation 2025
  • Work Health and Safety Amendment (Crystalline Silica Substances) Regulation 2024

Codes of practice

  • Managing risks of hazardous chemicals in the workplace code of practice 2022
  • Managing risks of respirable crystalline silica in the workplace Code of Practice 2026

Northern Territory

Acts and regulations

  • Work Health and Safety (National Uniform Legislation) Act 2011
  • Work Health and Safety (National Uniform Legislation) Regulations 2011

Codes of practice

  • Managing risks of hazardous chemicals in the workplace Code of Practice 2020
  • Managing risks of respirable crystalline silica in the workplace Code of Practice 2026

South Australia

Acts and regulations

  • Work Health and Safety Act 2012
  • Work Health and Safety Regulation 2012

Codes of practice

  • Managing Risks of Hazardous Chemicals in the Workplace: Code of practice 2024

Tasmania

Acts and regulations

  • Work Health and Safety Act 2012
  • Work Health and Safety Regulations 2022

Codes of practice

  • Managing Risks of Hazardous Chemicals in the Workplace - Code of practice 2018

Western Australia

Acts and regulations

  • Work Health and Safety Act 2020
  • Work Health and Safety (General) Regulations 2022

Codes of practice

  • Managing risks of hazardous chemicals in the workplace – Code of practice 2022

Victoria

Acts and regulations

  • Occupational Health and Safety Act 2004
  • Occupational Health and Safety Regulations 2017

Personal protective equipment (PPE)

  • Foot Protection
  • Eye Protection
  • Face Protection
  • Hand ProtectionDisposable gloves
  • Protective ClothingDisposable or washable coveralls
  • Breathing ProtectionHalf-face respirator (P1 or P2, disposable or cartridge), fit-tested

Job steps, hazards and controls

  • Work activity

    Training

    • Hazard

      Exposure to respirable crystalline silica (RCS)

      Before controls4 Acute
      Controls

      • Training and information provided to workers on respirable crystalline silica (RCS) should include the following:

        • Information on RCS through safety data sheet (SDS) or labels

        • Risk management process

        • Work practices, procedures and control measures

        • How to fit, use, maintain and clean personal protective equipment (PPE)

        • Emergency procedures, including any special decontamination procedures or PPE failures

        • First aid and incident reporting procedures

        • The purpose and results of air monitoring, including the types of health tests that may be required

        • Checking controls are working and using them

        • Waste collection and disposal.

        • Explanation of the 30-day trigger: If a worker uses RPE for 30 or more days within a 12-month period for tasks involving RCS, they are required to undergo health monitoring.

      After controls2 Moderate
      Responsible
      • Organisation
      • Supervisor
    • Hazard

      Inexperienced worker

      Before controls3 High
      Controls

      • Supervision provided to inexperienced or new workers, e.g. cutting stone or concrete for the first time or using new machinery.

      After controls2 Moderate
      Responsible
      • Organisation
      • Supervisor

IR before controls · RR after controls1 LLow2 MModerate3 HHigh4 AAcute

Overall risk after controls2 MModeratethe highest rating after controls

13 خطوات عمل أخرى، من Worker consultation إلى Emergency response

لكل منها مخاطرها وتقييمات خطورتها وإجراءات التحكم فيها، إضافة إلى توقيع طاقمك.

جرّب المحرّر مجانًااحصل على حزمة التوفير هذه
المعاينة بصيغة

كيف يبدو في المتصفح

احصل على حزمة التوفير هذه

سجّل مجانًا، ثم اختر الطريقة التي تناسبك. يُضاف كل مستند إلى مكتبتك، في مجلد يحمل اسم الحزمة.

  • مشمول في الخطط المدفوعة

    استخدم أرصدة النماذج من خطتك. تكلفة هذه الحزمة 13 بدلًا من 24.

    قارن الخطط والأسعار

  • اشترِه مرة واحدة

    $1,169.35 $2,158.80 تُدفع مرة واحدة، ويبقى ملكك. يعمل على الخطة المجانية أيضًا.

جرّب المحرّر مجانًاسجّل مجانًا

لا حاجة إلى بطاقة للتسجيل. يحصل أعضاء الوصول المبكر على خصم 30% على أي خطة.

ما يتضمنه

  1. Silica Dust

    SWMS · 14 خطوات عمل

    Silica Dust SWMS: 14 job steps covering RCS dust control, wet cutting, dust extraction, RPE, the 30-day health monitoring trigger and clean-up.

    يُباع أيضًا منفردًا
  2. Refrigerant Gas

    SWMS · 9 خطوات عمل

    SWMS for the safe use of fluorocarbon refrigerants: licensing, cylinder transport and storage, refrigerant recovery, inspection and emergency response.

    يُباع أيضًا منفردًا
  3. Materials Duct Lifter

    SWMS · 6 خطوات عمل

    Materials Duct Lifter SWMS: 6 job steps covering site set-up, power line clearances, lifter pre-inspection, operation and emergency response.

    يُباع أيضًا منفردًا
  4. EWP, Boom, Cherry Picker and Scissor Lift

    SWMS · 12 خطوات عمل

    EWP SWMS for scissor lifts, boom lifts and cherry pickers: 12 job steps, from rescue planning and set-up to working at height, fuelling and recharging.

    يُباع أيضًا منفردًا
  5. Duct Work Installation

    SWMS · 11 خطوات عمل

    SWMS for installing ductwork for exhaust and air conditioning systems: site set-up, delivery, roof space work, tools, chemicals and emergencies.

    يُباع أيضًا منفردًا
  6. Air Conditioning Installation

    SWMS · 16 خطوات عمل

    Covers installing, maintaining or repairing air conditioning units, with the risks and controls for each job step from planning to emergency response.

    يُباع أيضًا منفردًا
  7. Mobile Plant Working Near-Around

    SWMS · 8 خطوات عمل

    SWMS for people working near powered mobile plant on construction sites: traffic management, pedestrian rules, passengers, noise, lasers and emergency response.

    يُباع أيضًا منفردًا
  8. Cool Room Construction

    SWMS · 18 خطوات عمل

    SWMS for building insulated cool room and freezer panels: set-up, working at height, cutting and lifting panels, mobile plant, completion and emergencies.

    يُباع أيضًا منفردًا
  9. Risers Working In

    SWMS · 12 خطوات عمل

    Safe work method statement for working in risers, covering 12 job steps from rescue planning and entry assessment to falls, heat stress and emergencies.

    يُباع أيضًا منفردًا
  10. Welding

    SWMS · 10 خطوات عمل

    Welding SWMS: 10 job steps covering fire and explosion, gas cylinders, fumes, electrical equipment, burns, heat stress, angle grinders and emergencies.

    يُباع أيضًا منفردًا
  11. Air Conditioning Service and Repairs

    SWMS · 14 خطوات عمل

    SWMS for air conditioning service and repairs: refrigerants, indoor and outdoor unit maintenance, energised electrical work, testing and emergencies.

    يُباع أيضًا منفردًا
  12. Confined Space Work

    SWMS · 10 خطوات عمل

    A SWMS for confined space work: pre-entry risk assessment, entry permits, standby people, ventilation and gas testing, isolation and emergency retrieval.

    يُباع أيضًا منفردًا
  13. Manual Handling

    SWMS · 18 خطوات عمل

    Manual Handling SWMS: 18 job steps covering lifting and carrying, team lifts, lifting aids, sustained postures, ergonomics, driving, and people and animal handling.

    يُباع أيضًا منفردًا
  14. Asbestos Awareness

    SWMS · 4 خطوات عمل

    Asbestos Awareness SWMS: 4 job steps for identifying and reporting asbestos-containing materials and responding to accidental disturbance.

    يُباع أيضًا منفردًا
  15. Hazardous Chemicals

    SWMS · 12 خطوات عمل

    SWMS for hazardous chemicals work: purchasing, storage, labelling, handling, confined spaces, completion and emergency response.

    يُباع أيضًا منفردًا
  16. Working in Roof Spaces

    SWMS · 8 خطوات عمل

    SWMS for working in roof spaces, ceiling spaces and subfloors: electrical hazards, ladders, heat stress, vermin, snakes and emergency response.

    يُباع أيضًا منفردًا
  17. Working On/Near Telecommunications Towers

    SWMS · 8 خطوات عمل

    Working on or near telecommunications towers SWMS: 8 job steps covering tower climbing, falls, RF exposure, completion and emergencies.

    يُباع أيضًا منفردًا
  18. Height Access Equipment

    SWMS · 17 خطوات عمل

    Height Access Equipment SWMS: 17 job steps covering fixed and mobile scaffolds, trestles, extension, platform and vertical ladders, and safety harnesses.

    يُباع أيضًا منفردًا
  19. Mechanical Ventilation System

    SWMS · 15 خطوات عمل

    Mechanical Ventilation System SWMS: 15 job steps for installing a commercial kitchen exhaust canopy or hood, from set-up to emergency response.

    يُباع أيضًا منفردًا
  20. Concrete Chasing

    SWMS · 13 خطوات عمل

    Concrete chasing SWMS with 13 job steps, covering silica dust, working at height, tools, noise, vibration and emergency response.

    يُباع أيضًا منفردًا
  21. Powered Non-powered Tools

    SWMS · 12 خطوات عمل

    Hazards and controls for hand-held power tools and non-powered tools, from site set-up and pre-start checks to emergency response.

    يُباع أيضًا منفردًا
  22. Refrigeration

    SWMS · 18 خطوات عمل

    SWMS for refrigeration work: cylinder handling, system evacuation, flushing and charging, working at height, testing and emergency response.

    يُباع أيضًا منفردًا
  23. Cool Room Repair

    SWMS · 16 خطوات عمل

    A SWMS for repairing cool rooms and freezer rooms from an elevated work platform (EWP): the hazards and controls for each job step.

    يُباع أيضًا منفردًا
  24. Pipework Mechanical

    SWMS · 19 خطوات عمل

    SWMS for mechanical pipework installation: fire system, condenser water and chilled water pipework, from site set-up to commissioning.

    يُباع أيضًا منفردًا

ما يغطيه

المخاطر التي يغطيها

التشريعات والمعايير التي يستند إليها

يأتي كل SWMS مع قائمة مراجع التشريعات ومدونات الممارسة الخاصة بنا.

ما توفّره

النموذجخطوات العملمنفردًا
Silica Dust14$89.95 · رصيد واحد
Refrigerant Gas9$89.95 · رصيد واحد
Materials Duct Lifter6$89.95 · رصيد واحد
EWP, Boom, Cherry Picker and Scissor Lift12$89.95 · رصيد واحد
Duct Work Installation11$89.95 · رصيد واحد
Air Conditioning Installation16$89.95 · رصيد واحد
Mobile Plant Working Near-Around8$89.95 · رصيد واحد
Cool Room Construction18$89.95 · رصيد واحد
Risers Working In12$89.95 · رصيد واحد
Welding10$89.95 · رصيد واحد
Air Conditioning Service and Repairs14$89.95 · رصيد واحد
Confined Space Work10$89.95 · رصيد واحد
Manual Handling18$89.95 · رصيد واحد
Asbestos Awareness4$89.95 · رصيد واحد
Hazardous Chemicals12$89.95 · رصيد واحد
Working in Roof Spaces8$89.95 · رصيد واحد
Working On/Near Telecommunications Towers8$89.95 · رصيد واحد
Height Access Equipment17$89.95 · رصيد واحد
Mechanical Ventilation System15$89.95 · رصيد واحد
Concrete Chasing13$89.95 · رصيد واحد
Powered Non-powered Tools12$89.95 · رصيد واحد
Refrigeration18$89.95 · رصيد واحد
Cool Room Repair16$89.95 · رصيد واحد
Pipework Mechanical19$89.95 · رصيد واحد
عند الشراء واحدًا تلو الآخر$2,158.80 · 24 أرصدة
ضمن هذه الحزمة$1,169.35 · 13 أرصدة توفّر $989.45

المراجعات

لا توجد مراجعات بعد.

كيف تعمل النماذج

جرّبه قبل أن تدفع.

  1. معاينة مجانية

    خطوات العمل والمخاطر والمهمة الأولى في كل نموذج متاحة للقراءة. دون تسجيل.

  2. جرّب المحرّر

    كيّف بيان SWMS تجريبيًا باسم شركتك ومهمتك وموقعك، على الحاسوب أو هاتفك.

  3. سجّل مجانًا

    تنتقل بياناتك وشعارك معك. وهذا النموذج يُفتح معبّأً مسبقًا.

  4. استخدم رصيدًا أو اشترِ مرة واحدة

    تتضمن الخطط المدفوعة أرصدة نماذج كل شهر. أو اشترِ هذا النموذج ليبقى لك.