Skip to content

Early access offer: 30% off, for as long as you stay subscribed.

Claim offer
Safety management

LTIFR and TRIFR: meaning, calculation and examples

What LTIFR and TRIFR mean, how to calculate each per million hours worked, what counts as a lost-time or recordable injury, and the limits of both rates.

By SafetyDocs

8 min read

LTIFR is the lost time injury frequency rate: the number of lost-time injuries for every million hours worked. TRIFR is the total recordable injury frequency rate: the number of recordable injuries (lost-time, medical treatment and restricted work injuries) for every million hours worked. Both are calculated the same way:

  • LTIFR = lost-time injuries ÷ hours worked × 1,000,000
  • TRIFR = recordable injuries ÷ hours worked × 1,000,000

If you searched "ltifr", "trifr meaning" or "how to calculate trifr", those are the short answers. The rest of this page defines each kind of injury, works through examples, explains the US 200,000-hour version, and sets out what these rates can't tell you.

What does LTIFR mean?

LTIFR stands for lost time injury frequency rate. It counts how often injuries serious enough to cost time off work happen, adjusted for how many hours people worked, so a business with 20 workers and one with 2,000 can be compared.

A lost-time injury (LTI) is a work-related injury or illness that costs at least a full day or shift away from work. Definitions differ a little in the detail:

  • The Office of the Federal Safety Commissioner, which collects injury data from accredited builders, defines an LTI as an occurrence that results in a permanent disability, or an injury resulting in time lost from work of one day or shift or more. It includes psychological injuries, such as stress after witnessing a traumatic event (FSC Online WHS Report Guide).
  • WorkSafe WA's mining statistics count an injury that results in an absence of at least one full day or shift any time after the day or shift on which the injury occurred (Safety performance in the Western Australian mineral industry 2023–24).

So the day of the injury itself usually doesn't count. A worker who goes home early on Monday and is back on Tuesday morning hasn't had an LTI; a worker who misses Tuesday's shift has.

Many Australian definitions go back to AS 1885.1-1990, the Workplace injury and disease recording standard, which set out how to record injuries and calculate frequency rates. Standards Australia now lists it as withdrawn, so check which definition your client, principal contractor or industry scheme uses and stick to it.

How to calculate LTIFR

LTIFR = (number of lost-time injuries ÷ total hours worked) × 1,000,000

Use the same period for both numbers, usually a financial year or a rolling 12 months. Safe Work Australia's data on injury frequency rates is also expressed as claims per million hours worked (Understanding workers' compensation injury frequency rates).

LTIFR worked example

A landscaping business has 45 workers. Over the financial year they worked 86,400 hours between them, and two workers had injuries that kept them off for at least a full shift: a sprained ankle and a back strain.

LTIFR = 2 ÷ 86,400 × 1,000,000 = 23.1

That means about 23 lost-time injuries for every million hours worked. It doesn't mean 23 people were hurt: the business is far smaller than a million hours, and the rate scales its two injuries up to that size.

What does TRIFR mean?

TRIFR stands for total recordable injury frequency rate. It uses the same formula as LTIFR, but counts every recordable injury, not just the ones that cost time.

SafeWork NSW's guide to measuring WHS performance describes a recordable injury as any event that results in impairment to a worker, whether that's loss of consciousness, medical treatment, restricted duties or lost time, and calculates TRIFR as the total of recordable injuries over a period, divided by hours worked in that period, multiplied by one million (Measuring and reporting WHS information).

In practice that means:

TRIFR = ((LTIs + MTIs + RWIs) ÷ total hours worked) × 1,000,000

Some organisations add fatalities to the count as a separate line. Check the definition you're asked to report against.

Lost-time, medical treatment and restricted work injuries

Each injury is counted once, at its most serious level. The FSC's guide says an incident that results in both medical treatment and lost time is counted as an LTI only.

TypeWhat it meansExampleCounts in
Lost-time injury (LTI)Permanent disability, or time off work of at least a full day or shift after the day of the injuryA fractured wrist that keeps a carpenter off for three weeksLTIFR and TRIFR
Restricted work injury (RWI)Not an LTI, but the worker can't fully do their normal job after the day of the injury, for example on light duties or reduced hoursA storeperson with a shoulder strain who moves to office tasks for a weekTRIFR
Medical treatment injury (MTI)Treated by, or on the order of, a medical practitioner, with no full day or shift lostA cut that needs stitches, with the worker back the next morningTRIFR
First aid injuryTreated on site with first aid onlyA splinter removed and a plaster appliedNeither

The restricted work definition comes from WorkSafe WA's mining statistics, and the MTI one from the FSC. The FSC gives examples of what would normally be medical treatment, such as stitches, treating an infection, prescription medication beyond a single first dose, admission to hospital and any injury that causes loss of consciousness. On their own, a tetanus shot, physiotherapy or an X-ray that leads to no further treatment wouldn't normally count.

How to calculate TRIFR

Take the landscaping business again. As well as its two LTIs, it had one worker on light duties for a fortnight after a wrist strain, and three cuts that needed stitches.

  • LTIs: 2
  • RWIs: 1
  • MTIs: 3
  • Recordable injuries: 6

TRIFR = 6 ÷ 86,400 × 1,000,000 = 69.4

The gap between the two rates is useful. An LTIFR of 23.1 next to a TRIFR of 69.4 says most recordable injuries didn't cost time, which is worth knowing when you plan training and controls.

LTIFR per 200,000 hours: the US basis

In the United States, injury rates are calculated per 200,000 hours, not per million. The US Bureau of Labor Statistics says the 200,000 represents 100 employees working 40 hours a week for 50 weeks a year (How to compute your firm's incidence rate). The formula is otherwise the same:

Rate = (number of cases × 200,000) ÷ hours worked

A rate per 200,000 hours is one fifth of the same rate per million hours. The landscaping business's TRIFR of 69.4 would be 13.9 on the US basis. If a global client or a US-owned principal asks for your "TRIR", check which base they mean before you send a number.

Counting the hours properly

The hours are as important as the injuries. Use hours actually worked, from payroll or timesheets. The BLS guide says hours worked shouldn't include non-work time even when it's paid, such as annual leave, sick leave and public holidays.

Decide up front whether contractor and labour hire hours (and their injuries) are in, and count both sides the same way. Including contractors' injuries but not their hours, or the reverse, makes the rate meaningless.

The limits of LTIFR and TRIFR

Both rates are lagging indicators: they count harm that has already happened. Safe Work Australia's report on measuring and reporting on work health and safety is blunt about what that means:

  • Injury rates "do not measure the health and safety of the work environment, nor are they a reliable indicator of WHS performance". Luck can make a rate fall while serious hazards stay uncontrolled.
  • Lost-time measures show business disruption, not how badly people were hurt. An absence of LTIs doesn't mean risks are controlled.
  • Rates tied to incentives can drive "dysfunctional consequences (such as under-reporting and data manipulation)". The report says LTIFR is more prone to this than broader measures.

SafeWork NSW's guide makes the same point: LTI and LTIFR are productivity indicators, "not valid and reliable measures of damage to people".

Under-reporting is the practical risk. If a bonus, a tender or a site leaderboard depends on a low LTIFR, people are tempted to bring an injured worker in for "alternative duties" that keep the injury off the LTI count, or not to report a minor injury at all. A low rate built that way hides exactly the hazards you need to see.

Small numbers are another trap. One injury moves a small business's rate a long way. Safe Work Australia recommends that smaller organisations calculate injury rates over a longer period, such as five years instead of one, to reduce the swings.

Leading indicators to pair with LTIFR and TRIFR

Leading indicators measure the work you do to prevent harm. Pair two or three of them with your injury rates, chosen for your biggest risks. Examples from the SafeWork NSW guide and common practice:

  • Hazard reports closed on time. Track how many hazards people report and how fast you fix them. A short hazard report form that's quick to fill in gets more reports.
  • Inspections done to schedule. Planned inspections completed, and the findings closed.
  • Investigations completed. Incidents investigated on time, and how many led to a higher-order control such as eliminating the hazard, not just more training.
  • Training and competency. Workers trained and assessed before they start a task.
  • Risk register reviews. Registers reviewed and updated to schedule.

For more on choosing and tracking these, see our guide to health and safety KPIs.

Good rates start with good records. Every injury needs an incident report on the day, and an injury and illness register gives you the list you'll count from at the end of the period. Serious injuries may also have to be reported to the regulator: see notifiable incidents in Australia.

Common questions

What is a good LTIFR? There's no single target. It depends on your industry, the work and how you define an LTI. Compare against your own past years first. Safe Work Australia's workers' compensation injury frequency rates give industry and occupation benchmarks, but they count compensation claims, which Safe Work Australia says are likely to underestimate all lost-time injuries.

What is the difference between LTIFR and TRIFR? LTIFR counts only injuries that cost a full day or shift or more. TRIFR counts those plus medical treatment and restricted work injuries, so it's always at least as high as LTIFR.

Is MTIFR the same as TRIFR? No. MTIFR, the medical treatment injury frequency rate, counts only medical treatment injuries. TRIFR adds lost-time and restricted work injuries to those.

Do I have to report my LTIFR to the regulator? Not under the WHS laws. You must notify the regulator of notifiable incidents, but frequency rates are a management measure. Clients, principal contractors and schemes such as the WHS Accreditation Scheme may ask for them.

This is general information, not legal advice.

Template library

Put it into practice with a ready-made SWMS.

Browse SWMS templates written for Australian trades. Preview any of them free, then tailor one to your job in minutes.

Templates for this work

Browse the template library