VOC assessment: what a verification of competency is
A verification of competency (VOC) checks a worker can do a task safely. How it differs from a licence and training, when you need one and what to record.
7 min read

A verification of competency (VOC) is a documented check that a worker can actually do a particular task, or operate a particular piece of equipment, safely and to the standard required. An assessor watches them do it, asks questions to test their knowledge, checks their licences and training, and records the result.
If you searched "voc assessment" or "what is a VOC", that's the short answer. The rest of this page explains how a VOC differs from a licence and from training, when you'll need one, who can do the assessment and what the record should hold.
What is a verification of competency?
The Office of the Federal Safety Commissioner (OFSC), which accredits builders on government-funded projects, defines a VoC as "a method of documented evaluation of the skill level of a person against defined competency standards in order to evaluate the person's ability to carry out the relevant activity or works" (OFSC fact sheet: Verification of Competency – Mobile Plant).
In plain terms, a VOC answers one question: can this person do this job, here, safely? It's usually done for:
- operating plant: excavators, loaders, rollers, telehandlers, elevating work platforms and forklifts;
- using specialised equipment, such as a gas detector or a concrete saw;
- high-risk tasks, such as confined space entry or working at heights in a harness; and
- site-specific processes, such as an isolation procedure on a particular machine.
VOC vs licence vs training
A VOC, a licence and a training course all say something about a worker's ability. They say different things.
| High risk work licence ("ticket") | Training | VOC | |
|---|---|---|---|
| What it shows | The person met a national standard for a class of high risk work when they were assessed | The person was taught the task, and in an accredited course assessed against a unit of competency | The person can do this task, with this equipment, to your standard, now |
| Who issues it | The WHS regulator in each state, after assessment through a registered training organisation (RTO) | An RTO, a manufacturer or the business itself | The business, or an assessor it engages |
| Required by law? | Yes, for the classes of high risk work it covers | The PCBU must provide suitable and adequate training | Not by name, but a common way to show the training worked |
| How long it lasts | Five years, then renewed (regulation 92) | Depends on the course | Until the business decides it needs checking again |
The two often go together. A licence is the legal minimum for licensed work, and a VOC checks that the licence holder can safely operate the particular machine on your site. A worker might hold a forklift licence earned on a counterbalance forklift in a warehouse and never have driven a rough-terrain forklift on a sloping construction site.
A VOC never replaces a licence that the law requires. A person must not carry out a class of high risk work without a licence for that class (regulation 81), and a VOC doesn't count as one. The business must also see written evidence of the licence before it lets the worker do that work (regulation 85). The exceptions are narrow: a trainee working towards the licence under the supervision of a licence holder, and a short period after finishing the course while the licence application is processed (regulation 82).
Why VOCs matter: the law behind them
No WHS law uses the words "verification of competency". The duty that makes them useful is in the primary duty of care: a PCBU must provide "any information, training, instruction or supervision that is necessary to protect all persons from risks to their health and safety" (section 19(3)(f) of the model WHS Act).
The Regulations add that the information, training and instruction must be suitable and adequate for the nature of the work, its risks and the controls in place (regulation 39). The NSW Resources Regulator points to the same provision when it explains VOCs for mobile plant operators, and notes that a VOC "is often required by employers before individuals are even allowed on site or before they can start their job" (Operating mobile plant: verification of competency).
Training on its own doesn't prove that. If a worker is hurt, the questions will include how you knew they could do the job. A signed VOC record is the answer.
When do you need a VOC?
You'll usually need one:
- Before someone operates plant that doesn't need a licence. The classes of high risk work are listed in Schedule 3 of the Regulations. Forklifts, cranes, hoists and boom-type elevating work platforms of 11 metres or more are on it; excavators, loaders, skid steers and rollers aren't. For those machines a VOC, or an RTO statement of attainment, is how most sites decide who can operate them.
- When a site or client asks. Principal contractors often want VOCs for every plant operator before they get a site induction. On projects under the WHS Accreditation Scheme, the OFSC's audit criteria require a system that defines the competency needed to operate mobile plant, which may combine licences, RTO training and a VOC process.
- For a new model or attachment. A different machine, control layout or attachment can change how a task is done safely.
- After a long break. A worker returning after months away from a task may need to show they still have the skills.
- After an incident or near miss involving the task or the equipment.
- When the method changes, for example a new procedure or a change to the SWMS.
Who can do a VOC assessment?
The assessor needs to know the task and know how to assess. The OFSC's fact sheet says that, where an RTO doesn't do the VOC, the assessor should hold the TAEASS402 Assess competence unit, since superseded by TAEASS412 (or an equivalent or higher qualification) and the licence or certificate for the plant being assessed, or be part of a team that between them meets both.
It also lists what isn't acceptable on its own: a letter from an employer or supervisor saying the worker is competent, or an assessment by someone with no assessor competence or no experience of the plant. Outside OFSC projects these aren't legal rules, but they're a sensible standard to follow.
What should a VOC record include?
A useful VOC record lets anyone check later who was assessed, on what, against what standard and with what result. Include:
- The worker: name, employer, and licences and qualifications held, with numbers and expiry dates.
- The task or equipment: what was assessed, including the make, model and any attachments.
- The standard: what the worker was assessed against, such as the manufacturer's operating manual, your safe work procedure or a unit of competency.
- The method: a practical demonstration, a knowledge check (verbal or written) and a review of documents. The NSW Resources Regulator's example covers pre-start checks, safe operation, parking and securing the machine, site traffic rules, SWMS and emergency procedures.
- The result: competent, or not yet competent with the gaps and what happens next, such as supervised practice and a reassessment.
- The assessor: name, qualifications and signature, and the worker's signature.
- The date, and when the VOC should be reviewed.
The Verification of Competency Record has these sections, with space for a reassessment and a checklist covering the knowledge assessment, practical observation and documentation review.
Keeping track across your workforce
One VOC on file is easy. Fifty workers, a dozen machines and several sites need a system. Two registers do most of the work:
- A competency mapping register lists each role or task and what it needs: skills, knowledge, licences and experience. It's the standard every VOC is measured against.
- A worker competency register records each worker's assessments: the task, the date, the assessor, the method, the licences held and the outcome.
Together they show at a glance who can operate what, whose licence is about to expire and who needs a reassessment. That's what a principal contractor or auditor will ask to see. For the forklift-specific side, see our guide to a forklift pre-start checklist, which a VOC should test.
Common questions
Is a VOC a legal requirement? Not by name. The law requires suitable and adequate training, instruction and supervision, and a licence for high risk work. A VOC is the usual way to show a worker can do a task safely, and many sites make it a condition of entry.
Does a VOC replace a high risk work licence? No. Where the law requires a licence, the worker must hold it. A VOC can check a licence holder's skill on a particular machine, but it isn't a licence.
How often should VOCs be renewed? The WHS laws don't set a period. The OFSC doesn't require refresher training unless the law, the RTO or the company requires it. Set a review period in your own procedure that suits the risk, and reassess straight away after an incident, a long break or a change of equipment.
Can a supervisor sign off a VOC? Yes, if they have the skills to assess and know the task and equipment well. A signature from someone who hasn't watched the worker do the task isn't a VOC.
This is general information, not legal advice. Check the current law with your WHS regulator.
Template library
Put it into practice with a ready-made SWMS.
Browse SWMS templates written for Australian trades. Preview any of them free, then tailor one to your job in minutes.
Templates for this work
- Safe Work Method Statement (SWMS)Earthmoving Equipment
- Safe Work Method Statement (SWMS)Manual Handling
- Safe Work Method Statement (SWMS)Forklift
- Safe Work Method Statement (SWMS)Mobile Plant Working Near-Around


