टेम्पलेट दस्तावेज़ अंग्रेज़ी में लिखे गए हैं।

वैल्यू पैक · 15 टेम्पलेट

Concrete Tilt-up Construction

वैल्यू पैक · PACK-50319

15 टेम्पलेट
11 की कीमत में 15
लाइब्रेरी के एक फ़ोल्डर में आता है

A set of 15 SWMS for tilt-up and precast panel contractors: tilt-up panels, panel lifting, concrete placement, foundations, dogging and spotters.

Each SWMS is the same one sold on its own, so you get every update to it. Together they cost 11 template credits instead of 15.

Pre-cast Tilt-up Panels

SWMSVersion 8

Company doing the work: [Company]
Business contact: —
Phone #: —
Responsible person (for monitoring SWMS and work): —
Signature: —
Date: —
Contact phone #: —

Principal contractor (PC): [Principal contractor]
PC address: —
PC phone #: [PC phone]
Date SWMS provided to PC: —
Job site address: [Site address]
Is the work associated with a construction project?: —

Site management plan

If the work is part of a construction project, this SWMS must align with requirements of the Site Management Plan in place for the Construction Project.

High-risk construction work

This work activity involves the following “High-Risk Construction Work” (HRCW - identified in the Job Task column)

Mobile Plant

Planning and preparation

Planning/Preparation

Liaise with Principal Contractor to identify on-site safety systems and procedures
Establish supervisory and communication arrangements
Principal contractor to confirm emergency response procedures are in place.

Hold points

Hold points identified and signed off before continuing work. (specify the hold points)

Training/Licence

All workers to have a General Construction Induction Card
Relevant workers have relevant certificates of competency, licenses, and training. Specify on the SWMS Sign-off for each worker.
Trained First Aider on site
All workers trained in site-specific emergency and evacuation procedures, SWMS, safe work procedures, and safety data sheets.

Worker duties and responsibilities

Fit condition for work, i.e., no signs of fatigue, alcohol or drugs
Attend all site inductions/briefings
Comply with all site requirements, e.g. PPE, Traffic Management Plans (TMP)
Only carry out work related to the contract
Inspect completed work and report possible safety, environmental and quality matters to the supervisor.

Monitor/Review

All people involved in the task must have this SWMS communicated to them before work commences
SWMS to be reviewed and amended if necessary, in consultation with relevant people after any near miss or incident
If additional site hazards identified, review this SWMS and amend control measures to suit
People, including workers, contractors and sub-contractors, affected by the revisions to this SWMS, must be informed ASAP
Give the principal contractor a copy of the revised SWMS
The site supervisor to monitor works against the controls stated in this SWMS
SWMS must be kept on-site and made available for inspection or review
Keep a record of this SWMS until the job is complete or for two years if involved in a notifiable incident
Regardless of any other factor, the person in control of the workplace must review this SWMS at least annually.

Site-specific notes

Legislation and codes of practice

None listed.

Personal protective equipment

Foot Protection
Hearing Protection
High Visibility
Head Protection
Eye Protection
Hand Protection
Protective Clothing

Do not wear rings, watches or jewellery that may become entangled. Long and loose hair must be tied back.

Job steps, hazards and controls

Work activity
Provide training on the health effects associated with RCS
- Hazard
  Exposure to silica dust
  Before controls4 Acute
  Controls
  - Training and information provided to workers on RCS should include:
    Identification of RCS dust through Safety Datasheet (SDS) or labels
    Dust exposure prevention strategies
    Checking controls are working and using them
    When and how to use any respiratory protective equipment provided and what to do if something goes wrong (Including worker respirator fit and check processes).
  After controls2 Moderate
  Responsible
  - Supervisor

IR before controls · RR after controls1 LLow2 MModerate3 HHigh4 AAcute

Overall risk after controls2 MModeratethe highest rating after controls

Work activity
Temporary casting bed-design
Have an engineer verify the casting bed and plan its location
Work activity
Concrete panel design
Have approved panel and formwork designs before starting
Work activity
Check weather conditions & prepare
Check the weather and plan for heat and cold
Work activity
Arrival on-site & assess onsite conditions
Check the site, report to the supervisor and complete a JSA
Work activity
Work area set-up
Barricade the work area and keep unauthorised people out
Work activity
Environment
Manage noise, waste, spills, waterways, vegetation, vehicles and animals
Work activity
House keeping
Keep the work area clean and clear of trip hazards
Work activity
Manual tasks
Plan and share manual tasks to avoid strain injuries
Work activity
Materials delivery
Deliver and unload materials away from plant, traffic and power lines
Work activity
Working with powered & non-powered tools
Inspect and use power, fuel and powder-actuated tools safely
Work activity
Erecting formwork
Erect formwork on a clean casting bed and cut timber safely
Work activity
Applying bond breakers/release agents
Apply bond breakers following the SDS and avoid slips on forms
Work activity
Setting steel reinforcement / lifting
Carry, place and cut steel reinforcement safely and cap exposed ends
Work activity
Tying steel reinforcement
Tie steel reinforcement with safe wire handling and tying tools
Work activity
Placing and finishing concrete
Place, vibrate and trowel concrete safely
Work activity
Removing/ stripping formwork
Strip formwork in order and stack materials as you go
Work activity
On completion
Clear, clean and secure the site on completion
Work activity
Emergency response
Respond to emergencies and report incidents

Permits

Plant and equipment

Hazardous substances

Supervisory arrangements

SWMS Sign-off

This SWMS developed in consultation and cooperation with workers and relevant organisation representatives. I have read the above SWMS, and I understand its contents. I confirm that I have the skills and training, including relevant certification, to conduct the task as described. I agree to comply with safety requirements within this SWMS, including risk control measures, safe work instructions, and PPE described.

Worker’s name	Job role / positione.g. supervisor, worker, trainee	Licences, competencies & qualificationsType / descriptionClassNumber	Date	Signature
-	-	-	-	-
-	-	-	-	-
-	-	-	-	-
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)

Hierarchy of controls

Risk matrix

Step 1: Determine likelihood

Step 2: Determine consequence

Step 3: Determine the risk score

Likelihood ↑	InsignificantNo effect, or so minor that the effect is acceptable	MinorMinor first aid treatment, minimal business disruption, minimal environmental effect	ModerateSerious injuries, medium business interruption, medium environmental impact	MajorExtensive injuries or fatality, significant business interruption, environmental harm, prosecution	CatastrophicMultiple permanent disabilities or fatalities, business failure, substantial environmental harm, prosecution or imprisonment
	Consequence →
Almost certainExpected in most circumstances	2 Moderate	2 Moderate	3 High	4 Acute	4 Acute
LikelyWill probably occur in most circumstances	2 Moderate	2 Moderate	3 High	4 Acute	4 Acute
PossibleCould possibly occur at some time	1 Low	2 Moderate	2 Moderate	3 High	4 Acute
UnlikelyUnlikely but possible	1 Low	1 Low	2 Moderate	3 High	4 Acute
RareHighly unlikely to occur	1 Low	1 Low	2 Moderate	2 Moderate	3 High

1 LowRecord and monitor. Proceed with work, and review the risks regularly.
2 ModerateMaintain control measures. Be cautious when working, and monitor and review regularly.
3 HighReview before commencing work. Introduce new controls or maintain high-level controls to lower the risk level, and monitor the controls frequently.
4 AcuteDo not proceed until the risk level is reduced. Immediately introduce high-level controls, and re-assess before proceeding.

Step 4: Record risk

काम के 18 और चरण, Temporary casting bed-design से Emergency response तक

हर एक में उसके ख़तरे, जोखिम रेटिंग और नियंत्रण, और साथ में आपके क्रू का साइन-ऑन।

एडिटर मुफ़्त में आज़माएँ यह वैल्यू पैक पाएँ

ब्राउज़र में यह कैसा दिखता है

यह वैल्यू पैक पाएँ

मुफ़्त में साइन अप करें, फिर चुनें कि आप इसे कैसे लेना चाहते हैं। हर दस्तावेज़ आपकी लाइब्रेरी में, पैक के नाम वाले फ़ोल्डर में जाता है।

पेड प्लान में शामिल
अपने प्लान के टेम्पलेट क्रेडिट इस्तेमाल करें। इस पैक की कीमत 15 के बजाय 11 है।
प्लान और कीमतों की तुलना करें
एक बार ख़रीदें
$989.45 ~~$1,349.25~~ एक बार का भुगतान, और यह हमेशा आपका रहेगा। मुफ़्त प्लान पर भी चलता है।

एडिटर मुफ़्त में आज़माएँ मुफ़्त में साइन अप करें

साइन अप के लिए कार्ड नहीं चाहिए। अर्ली एक्सेस सदस्यों को किसी भी प्लान पर 30% की छूट मिलती है।

क्या-क्या शामिल है

Pre-cast Tilt-up Panels
SWMS · काम के 19 चरण
Pre-cast Tilt-up Panels SWMS: nineteen job steps covering casting beds, formwork, steel reinforcement, concrete placing, stripping and emergency response.
अलग से भी मिलता है
Mobile Plant Working Near-Around
SWMS · काम के 8 चरण
SWMS for people working near powered mobile plant on construction sites: traffic management, pedestrian rules, passengers, noise, lasers and emergency response.
अलग से भी मिलता है
Spotter
SWMS · काम के 11 चरण
SWMS for spotters and safety observers: traffic and mobile plant, work near overhead and underground assets, scaffolding and EWPs, roll-over and first aid.
अलग से भी मिलता है
Concrete Placement and Finishing
SWMS · काम के 13 चरण
SWMS for concrete placement and finishing: delivery, pumping and pouring, power lines, mobile plant, cement burns, trowelling machines and emergencies.
अलग से भी मिलता है
Concrete Boom or Line Pumping
SWMS · काम के 15 चरण
SWMS for truck-mounted concrete boom and line pumping: road travel, pump set-up, the pour, clearing line blockages, line cleaning and emergencies.
अलग से भी मिलता है
Concrete Foundations Excavating - Pouring
SWMS · काम के 17 चरण
SWMS for excavating, steel setting and pouring concrete foundations: 17 job steps from site set-up and plant delivery to the pour and emergencies.
अलग से भी मिलता है
Silica Dust
SWMS · काम के 14 चरण
Silica Dust SWMS: 14 job steps covering RCS dust control, wet cutting, dust extraction, RPE, the 30-day health monitoring trigger and clean-up.
अलग से भी मिलता है
Dogman
SWMS · काम के 12 चरण
A Dogman SWMS covering the hazards and controls for dogging work, from site checks and rigging to signalling, lifting and landing the load.
अलग से भी मिलता है
Tilt-up Panel Lifting
SWMS · काम के 18 चरण
Tilt-up Panel Lifting SWMS: 18 job steps covering the lifting and bracing of tilt-up and precast concrete panels, from site set-up to emergency response.
अलग से भी मिलता है
Powered Non-powered Tools
SWMS · काम के 12 चरण
Hazards and controls for hand-held power tools and non-powered tools, from site set-up and pre-start checks to emergency response.
अलग से भी मिलता है
Caulking Grouting Patching
SWMS · काम के 12 चरण
SWMS for caulking, grouting and patching concrete panels, block and brick work, paving tiles and other building components.
अलग से भी मिलता है
Manual Handling
SWMS · काम के 18 चरण
Manual Handling SWMS: 18 job steps covering lifting and carrying, team lifts, lifting aids, sustained postures, ergonomics, driving, and people and animal handling.
अलग से भी मिलता है
Concrete Sawing and Core Drilling
SWMS · काम के 13 चरण
SWMS for using a hand-held, electric or petrol/diesel-powered concrete saw and core drill, with silica dust, fuel and electrical controls.
अलग से भी मिलता है
Air Compressor
SWMS · काम के 9 चरण
SWMS for portable air compressor work: transport, set-up, operation, fuel and electrical hazards, noise, housekeeping, shut-down and emergencies.
अलग से भी मिलता है
Concrete Slab on Ground
SWMS · काम के 17 चरण
Safe work method statement for concrete slab on ground work, covering formwork, fill and steel reinforcement placement, with the hazards and controls for each job step.
अलग से भी मिलता है

इसमें क्या-क्या है

इसमें शामिल ख़तरे

इसमें दिए गए कानून और मानक

हर SWMS के साथ कानूनों और कोड ऑफ़ प्रैक्टिस की हमारी संदर्भ सूची आती है।

आपकी बचत

टेम्पलेट	काम के चरण	अलग से
Pre-cast Tilt-up Panels	19	$89.95 · 1 क्रेडिट
Mobile Plant Working Near-Around	8	$89.95 · 1 क्रेडिट
Spotter	11	$89.95 · 1 क्रेडिट
Concrete Placement and Finishing	13	$89.95 · 1 क्रेडिट
Concrete Boom or Line Pumping	15	$89.95 · 1 क्रेडिट
Concrete Foundations Excavating - Pouring	17	$89.95 · 1 क्रेडिट
Silica Dust	14	$89.95 · 1 क्रेडिट
Dogman	12	$89.95 · 1 क्रेडिट
Tilt-up Panel Lifting	18	$89.95 · 1 क्रेडिट
Powered Non-powered Tools	12	$89.95 · 1 क्रेडिट
Caulking Grouting Patching	12	$89.95 · 1 क्रेडिट
Manual Handling	18	$89.95 · 1 क्रेडिट
Concrete Sawing and Core Drilling	13	$89.95 · 1 क्रेडिट
Air Compressor	9	$89.95 · 1 क्रेडिट
Concrete Slab on Ground	17	$89.95 · 1 क्रेडिट
एक-एक करके ख़रीदने पर		~~$1,349.25~~ · 15 क्रेडिट
इस पैक में		$989.45 · 11 क्रेडिट आप $359.80 बचाते हैं

रिव्यू

अभी कोई रिव्यू नहीं।

टेम्पलेट कैसे काम करते हैं

आज़माएँ, पैसे देने से पहले।

मुफ़्त प्रीव्यू
हर टेम्पलेट के काम के चरण, ख़तरे और पहला काम पढ़ने के लिए खुले हैं। साइन अप की ज़रूरत नहीं।
एडिटर आज़माएँ
कंप्यूटर या अपने फ़ोन पर, एक डेमो SWMS को अपनी कंपनी, जॉब और साइट के हिसाब से ढालें।
मुफ़्त में साइन अप करें
आपकी जानकारी और लोगो साथ आ जाते हैं। यह टेम्पलेट पहले से भरा हुआ खुलता है।
क्रेडिट इस्तेमाल करें या एक बार ख़रीदें
पेड प्लान में हर महीने टेम्पलेट क्रेडिट मिलते हैं। या यह टेम्पलेट हमेशा के लिए ख़रीद लें।