Các tài liệu mẫu được soạn bằng tiếng Anh.

Hệ thống · 110 tài liệuThuộc Concrete Formwork Integrated Industry Suite

Crane Truck Mounted

SWMS · SWMS-10133

16 bước công việc
Phiên bản 9

This SWMS covers the hazards and controls for operating a truck-mounted crane, such as a Hiab, in construction and industrial environments.

It takes your crew through each step, from training, road operation, arriving on site and setting up the work area to communication with ground workers, crane and lifting gear inspections, pre-lift assessment, loading and unloading, changing attachments, refuelling, completion and emergency response.

It includes controls for high-risk construction work, the PPE the work needs and an emergency response.

It suits construction managers, logistics professionals, crane operators, safety officers and anyone involved in or overseeing truck-mounted crane operations.

Xem trang riêng

Crane Truck Mounted

SWMSVersion 9

Company doing the work: [Company]
Business contact and phone: —
Responsible person (for monitoring SWMS and work): —
Responsible person's phone: —
Responsible person's signature: —
Date signed: —

Principal contractor (PC): [Principal contractor]
PC address: —
PC phone: [PC phone]
Date SWMS provided to PC: —
Job site address: [Site address]
Part of a construction project: —

Site management plan

If the work is part of a construction project, this SWMS must align with requirements of the Site Management Plan in place for the Construction Project.

High-risk construction work (HRCW)

This work activity involves the following “High-Risk Construction Work” (HRCW - identified in the Job Task column)

Energised ElectricalWork on or near energised electrical installations or services
Mobile PlantWork in an area where there is any movement of powered mobile plant

Planning and preparation

Planning/preparation

Liaise with Principal Contractor to identify on-site safety systems and procedures
Establish supervisory and communication arrangements
Principal contractor to confirm emergency response procedures are in place.

Hold points

Hold points identified and signed off before continuing work. (specify the hold points)

Training/licence

All workers to have a General Construction Induction Card
Relevant workers have relevant certificates of competency, licences, and training. Specify on the SWMS Sign-off for each worker.
Trained First Aider on site
All workers trained in site-specific emergency and evacuation procedures, SWMS, safe work procedures, and safety data sheets.

Worker duties and responsibilities

Fit condition for work, i.e., no signs of fatigue, alcohol or drugs
Attend all site inductions/briefings
Comply with all site requirements, e.g. PPE, Traffic Management Plans (TMP)
Only carry out work related to the contract
Inspect completed work and report possible safety, environmental and quality matters to the supervisor.

Monitor/review

All people involved in the task must have this SWMS communicated to them before work commences
SWMS to be reviewed and amended if necessary, in consultation with relevant people after any near miss or incident
If additional site hazards identified, review this SWMS and amend control measures to suit
People, including workers, contractors and sub-contractors, affected by the revisions to this SWMS, must be informed ASAP
Give the principal contractor a copy of the revised SWMS
The site supervisor to monitor works against the controls stated in this SWMS
SWMS must be kept on-site and made available for inspection or review
Keep a record of this SWMS until the job is complete or for two years if involved in a notifiable incident
Regardless of any other factor, the person in control of the workplace must review this SWMS at least annually.

Site-specific notes

Legislation and codes of practice

Australian Government

Acts and regulations

Work Health and Safety Act 2011
Work Health and Safety Regulations 2011

Codes of practice

Work Health and Safety (First Aid in the Workplace) Code of Practice 2015
Work Health and Safety (How to Manage Work Health and Safety Risks) Code of Practice 2015
Work Health and Safety (Managing Risks of Plant in the Workplace) Code of Practice 2015
Work Health and Safety (Managing the Work Environment and Facilities) Code of Practice 2015
Work Health and Safety (Construction Work) Code of Practice 2015

Australian Capital Territory

Acts and regulations

Work Health and Safety Act 2011
Work Health and Safety Regulation 2011

Codes of practice

Work Health and Safety (First Aid in the Workplace Code of Practice) Approval 2020
Work Health and Safety (How to Manage Work Health and Safety Risks Code of Practice) Approval 2025
Work Health and Safety (Managing the Work Environment and Facilities) Code of Practice 2025
Work Health and Safety (Construction Work Code of Practice) Approval 2025
Work Health and Safety (Managing Risks of Plant in the Workplace Code of Practice) 2025

Queensland

Acts and regulations

Work Health and Safety Act 2011
Work Health and Safety Regulation 2011

Codes of practice

First Aid in the Workplace Code of Practice 2021
How to Manage Work Health and Safety Risks Code of Practice 2021
Managing the Work Environment and Facilities Code of Practice 2021
Managing Risks of Plant in the Workplace Code of Practice 2021

New South Wales

Acts and regulations

Work Health and Safety Act 2011
Work Health and Safety Regulation 2025

Codes of practice

First Aid in the workplace code of practice 2020
How to manage work health and safety risks code of practice 2019
Managing the work environment and facilities code of practice 2019
Managing the risks of plant in the workplace code of practice 2022
Construction work code of practice 2019

Northern Territory

Acts and regulations

Work Health and Safety (National Uniform Legislation) Act 2011
Work Health and Safety (National Uniform Legislation) Regulations 2011

Codes of practice

First aid in the workplace – Code of practice 2022
How to manage work health and safety risks - Code of practice 2026
Managing risks of plant in the workplace Code of Practice 2026
Managing the work environment and facilities - Code of practice 2026
Construction work - code of practice 2026

South Australia

Acts and regulations

Work Health and Safety Act 2012
Work Health and Safety Regulation 2012

Codes of practice

First Aid in the Workplace: Code of practice 2020
How to Manage Work Health and Safety Risks: Code of practice 2020
Managing the Risks of Plant in the Workplace: Code of practice 2020
Managing the Work Environment and Facilities: Code of practice 2020
Construction work Code of Practice 2024

Tasmania

Acts and regulations

Work Health and Safety Act 2012
Work Health and Safety Regulations 2022

Codes of practice

First Aid in the Workplace - Code of practice 2020
How to Manage Work Health and Safety Risks - Code of practice 2024
Managing the Work Environment and Facilities - Code of practice 2024
Construction Work - Code of practice 2024
Managing the Risks of Plant in the Workplace - Code of practice 2024

Western Australia

Acts and regulations

Work Health and Safety Act 2020
Work Health and Safety (General) Regulations 2022

Codes of practice

First aid in the workplace - Code of Practice 2022
How to manage work health and safety risks – Code of practice 2022
Managing risks of plant in the workplace – Code of practice 2022
Managing the work environment and facilities – Code of practice 2022
Construction work – Code of practice 2022

Victoria

Acts and regulations

Occupational Health and Safety Act 2004
Occupational Health and Safety Regulations 2017

Personal protective equipment (PPE)

Foot Protection
Hearing Protection
High Visibility
Head Protection
Hand Protection

Do not wear rings, watches or jewellery that may become entangled. Long and loose hair must be tied back.

Job steps, hazards and controls

Work activity
Training
- Hazard
  Lack of training resulting in injuries & fatalities
  Before controls4 Acute
  Controls
  - All operators have the appropriate driver's Licence for truck
  - Trained & competent to operate the type of truck, crane & attachments they are using
  - A Vehicle Loading Crane HRW Licence or one of the four slewing mobile crane HRW licences is required to operate a vehicle loading crane with a capacity of 10 metre tonnes or more.
    * To calculate Metres Tonnes – Load x radius = Lift performance rating (in metre tonnes).
  - Appropriate mathematical procedures for estimation and measurement of loads
  - Knowledge of types of crane and their functions
  - Types of lifting equipment and slinging techniques for use.
  After controls2 Moderate
  Responsible
  - Supervisor

IR before controls · RR after controls1 LLow2 MModerate3 HHigh4 AAcute

Overall risk after controls2 MModeratethe highest rating after controls

Work activity
Road operation
Inspect the vehicle before travel and drive to the site safely
Work activity
Arrival on-site & assess onsite conditions
Park safely, report to the site supervisor and assess the site conditions
Work activity
Work area set-up
Set up the truck on firm, level ground with exclusion zones and power line clearances
Work activity
Environment
Control noise, waste, fuels and chemicals to protect the environment
Work activity
Housekeeping
Keep the work area clean, well lit and free of trip hazards
Work activity
Manual tasks
Handle materials safely to prevent musculoskeletal injuries
Work activity
Establish a communication system
Agree on communication between the crane operator and ground workers before work starts
Work activity
Pre-inspect crane
Complete the pre-start checks, test the controls and extend the outriggers before lifting
Work activity
Select and inspect load equipment
Inspect slings, chains, hooks and tag lines before and after use
Work activity
Pre-lift assessment
Check the load's weight, centre of gravity, slinging and landing area before lifting
Work activity
Loading & unloading
Lift loads vertically within the crane's rated capacity, keeping people clear
Work activity
Changing lift attachments
Inspect and change attachments to the manufacturer's instructions
Work activity
Refuelling on site
Refuel away from ignition sources with the right fire extinguisher on hand
Work activity
On completion
Stow the crane and outriggers, secure the load and sign out
Work activity
Emergency response
Call 000, follow the site emergency procedures and give first aid

Permits

Plant & equipment

Hazardous substances

Supervisory arrangements

SWMS sign-off

This SWMS developed in consultation and cooperation with workers and relevant organisation representatives. I have read the above SWMS, and I understand its contents. I confirm that I have the skills and training, including relevant certification, to conduct the task as described. I agree to comply with safety requirements within this SWMS, including risk control measures, safe work instructions, and PPE described.

Worker’s name	Job role / positione.g. supervisor, worker, trainee	Licences, competencies & qualificationsType / descriptionClassNumber	Date	Signature
-	-	-	-	-
-	-	-	-	-
-	-	-	-	-
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)

Hierarchy of controls

Risk matrix

Step 1: Determine likelihood

Step 2: Determine consequence

Step 3: Determine the risk score

Likelihood ↑	InsignificantNo effect, or so minor that the effect is acceptable	MinorMinor first aid treatment, minimal business disruption, minimal environmental effect	ModerateSerious injuries, medium business interruption, medium environmental impact	MajorExtensive injuries or fatality, significant business interruption, environmental harm, prosecution	CatastrophicMultiple permanent disabilities or fatalities, business failure, substantial environmental harm, prosecution or imprisonment
	Consequence →
Almost certainExpected in most circumstances	2 Moderate	2 Moderate	3 High	4 Acute	4 Acute
LikelyWill probably occur in most circumstances	2 Moderate	2 Moderate	3 High	4 Acute	4 Acute
PossibleCould possibly occur at some time	1 Low	2 Moderate	2 Moderate	3 High	4 Acute
UnlikelyUnlikely but possible	1 Low	1 Low	2 Moderate	3 High	4 Acute
RareHighly unlikely to occur	1 Low	1 Low	2 Moderate	2 Moderate	3 High

1 LowRecord and monitor. Proceed with work, and review the risks regularly.
2 ModerateMaintain control measures. Be cautious when working, and monitor and review regularly.
3 HighReview before commencing work. Introduce new controls or maintain high-level controls to lower the risk level, and monitor the controls frequently.
4 AcuteDo not proceed until the risk level is reduced. Immediately introduce high-level controls, and re-assess before proceeding.

Step 4: Record risk

Thêm 15 bước công việc, từ Road operation đến Emergency response

Mỗi bước đều có mối nguy, mức rủi ro và biện pháp kiểm soát, cùng phần ký nhận của đội.

Dùng thử trình soạn thảo miễn phí Lấy hệ thống này

Hiển thị thế nào trên trình duyệt

Lấy hệ thống này

Đăng ký miễn phí, rồi chọn cách bạn muốn lấy. Mọi tài liệu sẽ vào Thư viện của bạn, trong một thư mục mang tên gói.

Có trong các gói trả phí
Dùng lượt mở mẫu trong gói dịch vụ của bạn. Mẫu này cần 20 lượt.
So sánh các gói và giá
Mua một lần
$999.90 trả một lần, và mẫu là của bạn mãi mãi. Dùng được cả với gói Miễn phí.

Dùng thử trình soạn thảo miễn phí Đăng ký miễn phí

Không cần thẻ để đăng ký. Thành viên truy cập sớm được giảm 30% cho mọi gói.

Nội dung bao gồm

16 bước công việc

TrainingCheck operators hold the right licences and training for the truck, crane and attachments
Road operationInspect the vehicle before travel and drive to the site safely
Arrival on-site & assess onsite conditionsPark safely, report to the site supervisor and assess the site conditions
Work area set-upSet up the truck on firm, level ground with exclusion zones and power line clearances
EnvironmentControl noise, waste, fuels and chemicals to protect the environment
HousekeepingKeep the work area clean, well lit and free of trip hazards
Manual tasksHandle materials safely to prevent musculoskeletal injuries
Establish a communication systemAgree on communication between the crane operator and ground workers before work starts
Pre-inspect craneComplete the pre-start checks, test the controls and extend the outriggers before lifting
Select and inspect load equipmentInspect slings, chains, hooks and tag lines before and after use
Pre-lift assessmentCheck the load's weight, centre of gravity, slinging and landing area before lifting
Loading & unloadingLift loads vertically within the crane's rated capacity, keeping people clear
Changing lift attachmentsInspect and change attachments to the manufacturer's instructions
Refuelling on siteRefuel away from ignition sources with the right fire extinguisher on hand
On completionStow the crane and outriggers, secure the load and sign out
Emergency responseCall 000, follow the site emergency procedures and give first aid

Các mối nguy được đề cập

Luật và tiêu chuẩn được dẫn chiếu

Mỗi SWMS đều đi kèm danh sách tham chiếu luật và bộ quy tắc thực hành (codes of practice) của chúng tôi.

Cách các mẫu hoạt động

Dùng thử trước khi trả tiền.

Xem trước miễn phí
Các bước công việc, mối nguy và nhiệm vụ đầu tiên của mọi mẫu đều mở để đọc. Không cần đăng ký.
Thử trình soạn thảo
Chỉnh một SWMS demo theo công ty, công việc và công trường của bạn, trên máy tính hoặc điện thoại.
Đăng ký miễn phí
Thông tin và logo của bạn được chuyển sang. Mẫu này sẽ mở ra với thông tin đã điền sẵn.
Dùng một lượt hoặc mua một lần
Các gói trả phí có lượt mở mẫu mỗi tháng. Hoặc mua mẫu này để giữ lại.

Crane Truck Mounted

Xem trước SWMS Crane Truck Mounted

Site management plan

High-risk construction work (HRCW)

Planning and preparation

Planning/preparation

Hold points

Training/licence

Worker duties and responsibilities

Monitor/review

Site-specific notes

Legislation and codes of practice

Personal protective equipment (PPE)

Job steps, hazards and controls

Lấy hệ thống này

Có trong các gói trả phí

Mua một lần

Nội dung bao gồm

16 bước công việc

Các mối nguy được đề cập

Luật và tiêu chuẩn được dẫn chiếu

Dùng thử trước khi trả tiền.

Xem trước miễn phí

Thử trình soạn thảo

Đăng ký miễn phí

Dùng một lượt hoặc mua một lần