Windshield Replacement - Standard Vehicles
- Company doing the work
- [Company]
- Business contact and phone
- —
- Responsible person (for monitoring SWMS and work)
- —
- Responsible person's phone
- —
- Responsible person's signature
- —
- Date signed
- —
- Principal Contractor (PC)
- —
- PC Address
- —
- PC phone
- —
- Date SWMS provided to PC
- —
- Job Site Address
- —
- Part of a construction project
- —
Site management plan
If the work is part of a construction project, this SWMS must align with requirements of the Site Management Plan in place for the Construction Project.
High-risk construction work
This work activity involves the following “High-Risk Construction Work” (HRCW - identified in the Job Task column)
- Traffic CorridorsWork carried out adjacent to a road, railway or shipping lane, traffic corridor
Planning and preparation
Planning/preparation
Liaise with Principal Contractor to identify on-site safety systems and procedures
Establish supervisory and communication arrangements
Principal contractor to confirm emergency response procedures are in place.
Hold points
Hold points identified and signed off before continuing work. (specify the hold points)
Training/licence
All workers to have a General Construction Induction Card
Relevant workers have relevant certificates of competency, licenses, and training. Specify on the SWMS Sign-off for each worker.
Trained First Aider on site
All workers trained in site-specific emergency and evacuation procedures, SWMS, safe work procedures, and safety data sheets.
Worker duties and responsibilities
Fit condition for work, i.e., no signs of fatigue, alcohol or drugs
Attend all site inductions/briefings
Comply with all site requirements, e.g. PPE, Traffic Management Plans (TMP)
Only carry out work related to the contract
Inspect completed work and report possible safety, environmental and quality matters to the supervisor.
Monitor/review
All people involved in the task must have this SWMS communicated to them before work commences
SWMS to be reviewed and amended if necessary, in consultation with relevant people after any near miss or incident
If additional site hazards identified, review this SWMS and amend control measures to suit
People, including workers, contractors and sub-contractors, affected by the revisions to this SWMS, must be informed ASAP
Give the principal contractor a copy of the revised SWMS
The site supervisor to monitor works against the controls stated in this SWMS
SWMS must be kept on-site and made available for inspection or review
Keep a record of this SWMS until the job is complete or for two years if involved in a notifiable incident
Regardless of any other factor, the person in control of the workplace must review this SWMS at least annually.
Site-specific notes
(add notes specific to this site)
Legislation and codes of practice
None listed.
Personal protective equipment
- Foot Protection
- High Visibility
- Hand Protection
Do not wear rings, watches or jewellery that may become entangled. Long and loose hair must be tied back.
Job steps, hazards and controls
- Work activity
Arrival on-site & assess onsite conditions when exchanging windshields at sites other than your workshop
- Hazard
Personal injury, property damage &/or environmental incident
Before controls3 HighControlsWork vehicle should be positioned in a safe location, clear of traffic/vehicles/pedestrians during equipment delivery and materials removal (deploy physical barriers, caution signs as necessary)
Do not park illegally
Identify and obey all safety-related signage (check site entry requirements)
Report to Site Supervisor
Undertake a site-specific induction, including training in communication with other operators
Assess mobile phone reception
The worksite is exactly as detailed in Terms of Agreement or contract
Complete a JSA specifying the control measures unanticipated hazards
Sites where the public may be present
Provide and maintain suitable access/egress for pedestrians where required. Include:
Physical barriers to ensure persons do not enter within 5m of worksite
Caution signs
Stop-go baton operators
Establish a clearance zone for the work area (Examples: bollards, caution signs, tape etc.)
Ensure safe travel paths when re-directing pedestrians. Keep pedestrians and vehicles separated.
After controls2 ModerateResponsible- Supervisorto check the site and conduct JSA where necessary
- Hazard
Struck by vehicle
Before controls4 AcuteControlsWhen conducting repairs adjacent to a road:
Comply with local laws and permits
Erect any barriers & signage necessary to keep others safe and aware
Always wear a hi-vis. vest when undertaking any roadside repairs
Always use a spotter.
After controls2 ModerateResponsible- Supervisorto check the site and conduct JSA where necessary
- Hazard
Toxic fumes, Fire
Before controls4 AcuteControlsAdequate ventilation (prevent carbon monoxide build-up and exposure to solvent fumes)
Separated from other operations
Fire Extinguishers – accessible & serviced.
After controls2 ModerateResponsible- Supervisorto check the site and conduct JSA where necessary
IR before controls · RR after controls1 LLow2 MModerate3 HHigh4 AAcute
Overall risk after controls2 MModeratethe highest rating after controls
Thêm 6 bước công việc, từ Environment đến Emergency response
Mỗi bước đều có mối nguy, mức rủi ro và biện pháp kiểm soát, cùng phần ký nhận của đội.
