模板文件为英文。

Fibreglass Repairs

SWMS · SWMS-10495

9 个工作步骤
版本 3
Miscellaneous
任何手机都能看

This Fibreglass Repairs Safe Work Method Statement (SWMS) outlines the safety measures needed for grinding and repairing fibreglass. It identifies potential hazards and provides steps for safe operations, especially in areas with contaminated or flammable atmospheres.

It covers 9 job steps: checking the weather and preparing, arriving on site and assessing conditions, setting up the work area, the environment, housekeeping, sanding and grinding fibreglass, mixing and applying resin and mesh, completion, and emergency response.

It includes controls for dust inhalation, contact with moving parts, vibration and noise, hazardous substances and chemicals, and manual tasks.

It suits businesses and contractors who repair fibreglass, particularly those working in high-risk construction areas or dealing with hazardous substances.

Fibreglass Repairs

SWMSVersion 3

Company doing the work: [Company]
Business contact and phone: —
Responsible person (for monitoring SWMS and work): —
Responsible person's phone: —
Responsible person's signature: —
Date signed: —

Principal Contractor (PC): —
PC Address: —
PC phone: —
Date SWMS provided to PC: —
Job Site Address: —
Part of a construction project: —

Site management plan

If the work is part of a construction project, this SWMS must align with requirements of the Site Management Plan in place for the Construction Project.

High-risk construction work

This work activity involves the following “High-Risk Construction Work” (HRCW - identified in the Job Task column)

Hazardous AtmosphereWork in an area that may have a contaminated or flammable atmosphere

Planning and preparation

Planning

Liaise with Principal Contractor to identify on-site safety systems and procedures
Establish supervisory and communication arrangements
Principal contractor to confirm emergency response procedures are in place.

Hold points

Hold points identified and signed off before continuing work. (specify the hold points)

Training and licences

All workers to have a General Construction Induction Card
Relevant workers have relevant certificates of competency, licenses, and training. Specify on the SWMS Sign-off for each worker.
Trained First Aider on site
All workers trained in site-specific emergency and evacuation procedures, SWMS, safe work procedures, and safety data sheets.

Worker duties and responsibilities

Fit condition for work, i.e., no signs of fatigue, alcohol or drugs
Attend all site inductions/briefings
Comply with all site requirements, e.g. PPE, Traffic Management Plans (TMP)
Only carry out work related to the contract
Inspect completed work and report possible safety, environmental and quality matters to the supervisor.

Monitoring and review

All people involved in the task must have this SWMS communicated to them before work commences
SWMS to be reviewed and amended if necessary, in consultation with relevant people after any near miss or incident
If additional site hazards identified, review this SWMS and amend control measures to suit
People, including workers, contractors and sub-contractors, affected by the revisions to this SWMS, must be informed ASAP
Give the principal contractor a copy of the revised SWMS
The site supervisor to monitor works against the controls stated in this SWMS
SWMS must be kept on-site and made available for inspection or review
Keep a record of this SWMS until the job is complete or for two years if involved in a notifiable incident
Regardless of any other factor, the person in control of the workplace must review this SWMS at least annually.

Site-specific notes

Legislation and codes of practice

None listed.

Personal protective equipment

Foot Protection
Hearing Protection
High Visibility
Eye Protection
Hand Protection
Protective Clothing
Breathing Protection

Do not wear rings, watches or jewellery that may become entangled. Long and loose hair must be tied back.

Job steps, hazards and controls

Work activity
Check weather conditions & prepare
- Hazard
  Extreme weather
  Before controls3 High
  Controls
  - Check weather conditions – do not work in extreme conditions
  - Reschedule works to work in more moderate temperatures.
  After controls2 Moderate
  Responsible
  - Supervisorto maintain awareness of weather conditions
  - Operatorto follow controls
- Hazard
  Hyperthermia, Hypothermia
  Before controls3 High
  Controls
  - Ensure that workers are trained to recognise the symptoms of hyperthermia and hypothermia
  - Hot conditions. Ensure:
    Suitable protective clothing
    Sun brim on hard hats
    Safety glasses - UV rated
    Use 30+ sunscreen on exposed skin
    Adequate drinking water
    Access to shade on breaks
    Adequate breaks.
  - Cold conditions. Ensure:
    Schedule warm-up breaks
    Hold breaks inside
    Dress warmly in layers
    Stay dry (wet clothing chills the body rapidly)
    Workers must get out of the cold as soon as they can if starting to feel symptoms
    Alcohol, cigarettes, caffeine and certain medications increase susceptibility to cold.
  After controls2 Moderate
  Responsible
  - Supervisorto maintain awareness of weather conditions
  - Operatorto follow controls

IR before controls · RR after controls1 LLow2 MModerate3 HHigh4 AAcute

Overall risk after controls2 MModeratethe highest rating after controls

Work activity
Arrival on-site & assess onsite conditions
Position the vehicle safely and assess the site conditions
Work activity
Work area set-up
Set up an exclusion zone to prevent unauthorised access
Work activity
Environment
Control noise, air quality, waste and environmental impact
Work activity
House keeping
Keep the work area clean to prevent slips, trips and falls
Work activity
Sanding/grinding fibreglass
Control dust inhalation and contact with moving parts when sanding and grinding
Work activity
Mixing & applying resin & mesh
Control contact with hazardous substances and chemicals when mixing and applying resin and mesh
Work activity
On completion
Secure the work area and disconnect equipment safely
Work activity
Emergency response
Respond to injuries, environmental damage and other emergencies

Permits

Plant and equipment

Hazardous substances

Supervisory arrangements

SWMS sign-off

This SWMS developed in consultation and cooperation with workers and relevant organisation representatives. I have read the above SWMS, and I understand its contents. I confirm that I have the skills and training, including relevant certification, to conduct the task as described. I agree to comply with safety requirements within this SWMS, including risk control measures, safe work instructions, and PPE described.

Worker’s name	Job role / positione.g. supervisor, worker, trainee	Licences, competencies & qualificationsType / descriptionClassNumber	Date	Signature
-	-	-	-	-
-	-	-	-	-
-	-	-	-	-
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)

Hierarchy of controls

Risk matrix

Likelihood ↑	InsignificantNo effect, or so minor that the effect is acceptable	MinorMinor first aid treatment, minimal business disruption, minimal environmental effect	ModerateSerious injuries, medium business interruption, medium environmental impact	MajorExtensive injuries or fatality, significant business interruption, environmental harm, prosecution	CatastrophicMultiple permanent disabilities or fatalities, business failure, substantial environmental harm, prosecution or imprisonment
	Consequence →
Almost certainExpected in most circumstances	2 Moderate	2 Moderate	3 High	4 Acute	4 Acute
LikelyWill probably occur in most circumstances	2 Moderate	2 Moderate	3 High	4 Acute	4 Acute
PossibleCould possibly occur at some time	1 Low	2 Moderate	2 Moderate	3 High	4 Acute
UnlikelyUnlikely but possible	1 Low	1 Low	2 Moderate	3 High	4 Acute
RareHighly unlikely to occur	1 Low	1 Low	2 Moderate	2 Moderate	3 High

1 LowRecord and monitor. Proceed with work, and review the risks regularly.
2 ModerateMaintain control measures. Be cautious when working, and monitor and review regularly.
3 HighReview before commencing work. Introduce new controls or maintain high-level controls to lower the risk level, and monitor the controls frequently.
4 AcuteDo not proceed until the risk level is reduced. Immediately introduce high-level controls, and re-assess before proceeding.

还有 8 个工作步骤，从“Arrival on-site & assess onsite conditions”到“Emergency response”

每一步都有危险、风险等级和控制措施，另附工人签到。

免费试用编辑器获取这个模板

在浏览器中的样子

获取这个模板

免费注册，然后选择获取方式。你的公司信息会自动填好。

付费套餐包含
使用套餐中的模板额度。这一份需要 1 个额度。
比较套餐和价格
单独购买
$89.95 一次付清，永久归你。免费套餐也能用。

免费试用编辑器免费注册

注册无需银行卡。抢先体验会员购买任何套餐都可享 30% 折扣。

涵盖内容

9 个工作步骤

Check weather conditions & prepareCheck the weather conditions and use suitable protective clothing
Arrival on-site & assess onsite conditionsPosition the vehicle safely and assess the site conditions
Work area set-upSet up an exclusion zone to prevent unauthorised access
EnvironmentControl noise, air quality, waste and environmental impact
House keepingKeep the work area clean to prevent slips, trips and falls
Sanding/grinding fibreglassControl dust inhalation and contact with moving parts when sanding and grinding
Mixing & applying resin & meshControl contact with hazardous substances and chemicals when mixing and applying resin and mesh
On completionSecure the work area and disconnect equipment safely
Emergency responseRespond to injuries, environmental damage and other emergencies