模板文件为英文。

Generator Portable

SWMS · SWMS-10120

9 个工作步骤
已售出 121 次
版本 7
Power Tools & Equipment
任何手机都能看

This Generator Portable Safe Work Method Statement (SWMS) outlines the safety measures and controls for using portable unleaded petrol or diesel-powered generators. It helps with safe use in various environments, especially where there may be a risk of contamination or flammable atmospheres.

It covers 9 job steps, from transporting the generator to and from sites and assessing the site on arrival, through work area set-up, environmental controls, hazardous substance use, generator operation and re-fuelling, to completion and emergency response.

It identifies the hazards of each step and the controls that reduce the risk, and includes an emergency response.

It suits businesses and contractors who use portable generators, especially in the construction and event management sectors, and health and safety officers looking to strengthen safety protocols.

Generator Portable

SWMSVersion 7

Company doing the work: [Company]
Business contact and phone: —
Responsible person (for monitoring SWMS and work): —
Responsible person's phone: —
Responsible person's signature: —
Date signed: —

Principal Contractor (PC): [Principal contractor]
PC Address: —
PC phone: [PC phone]
Date SWMS provided to PC: —
Job Site Address: [Site address]
Part of a construction project: —

Site management plan

If the work is part of a construction project, this SWMS must align with requirements of the Site Management Plan in place for the Construction Project.

High-risk construction work

This work activity involves the following “High-Risk Construction Work” (HRCW - identified in the Job Task column)

Hazardous Atmosphere

Planning and preparation

Planning/Preparation

Liaise with Principal Contractor to identify on-site safety systems and procedures
Establish supervisory and communication arrangements
Principal contractor to confirm emergency response procedures are in place.

Hold points

Hold points identified and signed off before continuing work. (specify the hold points)

Training/Licence

All workers to have a General Construction Induction Card
Relevant workers have relevant certificates of competency, licenses, and training. Specify on the SWMS Sign-off for each worker.
Trained First Aider on site
All workers trained in site-specific emergency and evacuation procedures, SWMS, safe work procedures, and safety data sheets.

Worker duties and responsibilities

Fit condition for work, i.e., no signs of fatigue, alcohol or drugs
Attend all site inductions/briefings
Comply with all site requirements, e.g. PPE, Traffic Management Plans (TMP)
Only carry out work related to the contract
Inspect completed work and report possible safety, environmental and quality matters to the supervisor.

Monitor/Review

All people involved in the task must have this SWMS communicated to them before work commences
SWMS to be reviewed and amended if necessary, in consultation with relevant people after any near miss or incident
If additional site hazards identified, review this SWMS and amend control measures to suit
People, including workers, contractors and sub-contractors, affected by the revisions to this SWMS, must be informed ASAP
Give the principal contractor a copy of the revised SWMS
The site supervisor to monitor works against the controls stated in this SWMS
SWMS must be kept on-site and made available for inspection or review
Keep a record of this SWMS until the job is complete or for two years if involved in a notifiable incident
Regardless of any other factor, the person in control of the workplace must review this SWMS at least annually.

Site-specific notes

Legislation and codes of practice

None listed.

Personal protective equipment

Foot Protection

Do not wear rings, watches or jewellery that may become entangled. Long and loose hair must be tied back.

Job steps, hazards and controls

Work activity
Transporting the generator to/from sites
- Hazard
  Crush injuries
  Before controls4 Acute
  Controls
  - Towing a trailer-mounted generator:
    Block wheels to prevent accidental movement during coupling and uncoupling
    Hitch generator to the vehicle, check coupling and safety chains are secure
    Plugin rear warning (indicator) lamps lead to the socket on the vehicle
    Check that the warning lights are operating correctly
    Ensure that the jockey wheel and stabiliser legs raised and secured
    Check delivery location is agreed on and suitable
    Do not drive at an excessive speed when towing.
  After controls2 Moderate
  Responsible
  - Supervisorsto check all controls in place and followed
  - Workersto follow controls and make supervisor aware of any issues
- Hazard
  Fire / explosion
  Before controls3 High
  Controls
  - Secure fuel containers outside of the main cabin.
  - Ensure the fuel valve on the generator is in the closed position.
  - Fuel:
    Minimum quantities stored
    Containers clearly labelled and legible
    Fire protection equipment accessible, tested and tagged.
  After controls2 Moderate
  Responsible
  - Supervisorsto check all controls in place and followed
  - Workersto follow controls and make supervisor aware of any issues
- Hazard
  Projectile / Moving objects
  Before controls3 High
  Controls
  - Smaller portable generators must be transported in a trailer, or tray of utility – not inside the cabin of the vehicle
  - Secure the generator in the vehicle tray with lashing/restraint equipment to prevent movement during transport
  - Ensure that all people stand clear of potential fall zones during loading/unloading the generator.
  After controls2 Moderate
  Responsible
  - Supervisorsto check all controls in place and followed
  - Workersto follow controls and make supervisor aware of any issues
- Hazard
  Musculoskeletal (MSD) injuries
  Before controls3 High
  Controls
  - Use safe manual handling techniques for loading and unloading the generator
  - Do not attempt to lift the machine by yourself. Use lifting equipment to move the generator where required. If using team handling:
    Ensure all people matched physically
    One person directs the move
    Move planned and rehearsed
    Team handling only used where better means to move equipment (trolley) are not practicable.
  After controls2 Moderate
  Responsible
  - Supervisorsto check all controls in place and followed
  - Workersto follow controls and make supervisor aware of any issues

IR before controls · RR after controls1 LLow2 MModerate3 HHigh4 AAcute

Overall risk after controls2 MModeratethe highest rating after controls

Work activity
Arrival on-site & assess onsite conditions
Park safely, report in and check the site on arrival
Work activity
Work area set-up
Set up an exclusion zone and place the generator outdoors, dry and level
Work activity
Environment
Control noise, waste, fuel spills and other environmental impacts
Work activity
Hazardous substance /chemical use
Use hazardous substances as their SDS directs
Work activity
Generator operation
Run the generator, tools and leads as the manufacturer instructs
Work activity
Re-fuelling on site
Re-fuel with the engine off and cool, away from ignition sources
Work activity
On completion
Disconnect leads, let the unit cool, secure the site and sign out
Work activity
Emergency response
Call 000, give first aid and report the incident

Permits

Plant and equipment

Hazardous substances

Supervisory arrangements

SWMS Sign-off

This SWMS developed in consultation and cooperation with workers and relevant organisation representatives. I have read the above SWMS, and I understand its contents. I confirm that I have the skills and training, including relevant certification, to conduct the task as described. I agree to comply with safety requirements within this SWMS, including risk control measures, safe work instructions, and PPE described.

Worker’s name	Job role / positione.g. supervisor, worker, trainee	Licences, competencies & qualificationsType / descriptionClassNumber	Date	Signature
-	-	-	-	-
-	-	-	-	-
-	-	-	-	-
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)

Hierarchy of controls

Risk matrix

Step 1: Determine likelihood

Step 2: Determine consequence

Step 3: Determine the risk score

Likelihood ↑	InsignificantNo effect, or so minor that the effect is acceptable	MinorMinor first aid treatment, minimal business disruption, minimal environmental effect	ModerateSerious injuries, medium business interruption, medium environmental impact	MajorExtensive injuries or fatality, significant business interruption, environmental harm, prosecution	CatastrophicMultiple permanent disabilities or fatalities, business failure, substantial environmental harm, prosecution or imprisonment
	Consequence →
Almost certainExpected in most circumstances	2 Moderate	2 Moderate	3 High	4 Acute	4 Acute
LikelyWill probably occur in most circumstances	2 Moderate	2 Moderate	3 High	4 Acute	4 Acute
PossibleCould possibly occur at some time	1 Low	2 Moderate	2 Moderate	3 High	4 Acute
UnlikelyUnlikely but possible	1 Low	1 Low	2 Moderate	3 High	4 Acute
RareHighly unlikely to occur	1 Low	1 Low	2 Moderate	2 Moderate	3 High

1 LowRecord and monitor. Proceed with work, and review the risks regularly.
2 ModerateMaintain control measures. Be cautious when working, and monitor and review regularly.
3 HighReview before commencing work. Introduce new controls or maintain high-level controls to lower the risk level, and monitor the controls frequently.
4 AcuteDo not proceed until the risk level is reduced. Immediately introduce high-level controls, and re-assess before proceeding.

Step 4: Record risk

还有 8 个工作步骤，从“Arrival on-site & assess onsite conditions”到“Emergency response”

每一步都有危险、风险等级和控制措施，另附工人签到。

免费试用编辑器获取这个模板

在浏览器中的样子

获取这个模板

免费注册，然后选择获取方式。你的公司信息会自动填好。

付费套餐包含
使用套餐中的模板额度。这一份需要 1 个额度。
比较套餐和价格
单独购买
$89.95 一次付清，永久归你。免费套餐也能用。

免费试用编辑器免费注册

注册无需银行卡。抢先体验会员购买任何套餐都可享 30% 折扣。

涵盖内容

9 个工作步骤

Transporting the generator to/from sitesTow or carry the generator secured, and load it with help or lifting equipment
Arrival on-site & assess onsite conditionsPark safely, report in and check the site on arrival
Work area set-upSet up an exclusion zone and place the generator outdoors, dry and level
EnvironmentControl noise, waste, fuel spills and other environmental impacts
Hazardous substance /chemical useUse hazardous substances as their SDS directs
Generator operationRun the generator, tools and leads as the manufacturer instructs
Re-fuelling on siteRe-fuel with the engine off and cool, away from ignition sources
On completionDisconnect leads, let the unit cool, secure the site and sign out
Emergency responseCall 000, give first aid and report the incident