Fall arrest system failure班前安全会讲稿

它是什么

A harness, lanyard, lifeline or anchor that fails to stop a fall safely, through damage, poor fitting, an unrated anchor, too little clearance below, or a swing into a structure.

要检查的控制措施，最有效的排在前面

1. Prevent falls with edge protection, work platforms or a travel-restraint system, so fall arrest is the last line of defence rather than the plan.
2. Use anchor points designed and certified for fall arrest, installed and inspected by a competent person to the manufacturer's instructions and AS/NZS 1891.
3. Work out the fall clearance, swing-down and swing-back before rigging, and choose a lanyard or self-retracting lifeline that stops the worker before they strike the ground or a structure.
4. Inspect harnesses, lanyards, connectors and lifelines before each use, and take out of service anything damaged or that has arrested a fall.
5. Give each worker a harness of the right size and rating, and train them to fit, adjust and connect it correctly.
6. Keep lines clear of sharp edges, heat and chemicals, and have a rescue plan and equipment ready to reach a suspended worker quickly.

给工人的问题

1. 今天这项工作中，哪里可能会遇到fall arrest system failure？
2. 最有效的控制措施是：“Prevent falls with edge protection, work platforms or a travel-restraint system, so fall arrest is the last line of defence rather than the plan”。我们这里能做到吗？如果不能，为什么？
3. 这个工地上有哪些针对fall arrest system failure的控制措施缺失或不起作用？
4. 你会在什么情况下因为fall arrest system failure停工？你会告诉谁？
5. 在这项工作中，我们怎么报告危险、险情或事故？