مستندات النماذج مكتوبة باللغة الإنجليزية.

حزمة توفير · 37 نماذج

Shop-fitting Combo

حزمة توفير · PACK-50354

37 نماذج
37 بسعر 28
يصل في مجلد واحد في المكتبة

A set of 15 SWMS and 22 SOPs for shop-fitters and fit-out contractors.

The SWMS cover site establishment, partitioning, plasterboard, suspended ceilings, glazing and soft demolition. The SOPs include Table Saw, Reciprocating Saw and Handheld Circular Saw.

Each document is the same one sold on its own, so you get every update to it. Together they cost 28 template credits instead of 37.

Height Access Equipment

SWMSVersion 11

Company doing the work: [Company]
Business contact and phone: —
Responsible person (for monitoring SWMS and work): —
Responsible person's phone: —
Responsible person's signature: —
Date signed: —

Principal contractor (PC): [Principal contractor]
PC address: —
PC phone: [PC phone]
Date SWMS provided to PC: —
Job site address: [Site address]
Part of a construction project: —

Site management plan

If the work is part of a construction project, this SWMS must align with requirements of the Site Management Plan in place for the Construction Project.

High-risk construction work (HRCW)

This work activity involves the following “High-Risk Construction Work” (HRCW - identified in the Job Task column)

FallsRisk of a person falling more than two metres. Note: in some jurisdictions this is three metres.
Mobile PlantWork in an area where there is any movement of powered mobile plant

Working with a risk of a fall over 2 metres

The fall from height hierarchy of control level considered when establishing controls:

L1Work on the ground or solid construction, not chosen
L2Use a passive fall restraint system, e.g. guard rails, scaffolding, EWP, not chosen
L3Use a work positioning system, e.g. travel restraint, rope access, not chosen
L4Use a fall arrest system, e.g. safety harness, catch platforms, not chosen
L5Implement administrative controls, e.g. signage or instruction, not chosen

No level has been chosen yet.

Planning and preparation

Liaise with Principal Contractor to identify on-site safety systems and procedures
Establish supervisory and communication arrangements
Principal contractor to confirm emergency response procedures are in place.

Hold points

Hold points identified and signed off before continuing work. (specify the hold points)

Training/licence

All workers to have a General Construction Induction Card
Relevant workers have relevant certificates of competency, licenses, and training. Specify on the SWMS Sign-off for each worker.
Trained First Aider on site
All workers trained in site-specific emergency and evacuation procedures, SWMS, safe work procedures, and safety data sheets.

Worker duties and responsibilities

Fit condition for work, i.e., no signs of fatigue, alcohol or drugs
Attend all site inductions/briefings
Comply with all site requirements, e.g. PPE, Traffic Management Plans (TMP)
Only carry out work related to the contract
Inspect completed work and report possible safety, environmental and quality matters to the supervisor.

Monitor/review

All people involved in the task must have this SWMS communicated to them before work commences
SWMS to be reviewed and amended if necessary, in consultation with relevant people after any near miss or incident
If additional site hazards identified, review this SWMS and amend control measures to suit
People, including workers, contractors and sub-contractors, affected by the revisions to this SWMS, must be informed ASAP
Give the principal contractor a copy of the revised SWMS
The site supervisor to monitor works against the controls stated in this SWMS
SWMS must be kept on-site and made available for inspection or review
Keep a record of this SWMS until the job is complete or for two years if involved in a notifiable incident
Regardless of any other factor, the person in control of the workplace must review this SWMS at least annually.

Site-specific notes

Legislation and codes of practice

Australian Government

Acts and regulations

Work Health and Safety Act 2011
Work Health and Safety Regulations 2011

Codes of practice

Work Health and Safety (First Aid in the Workplace) Code of Practice 2015
Work Health and Safety (How to Manage Work Health and Safety Risks) Code of Practice 2015
Work Health and Safety (Managing the Work Environment and Facilities) Code of Practice 2015
Work Health and Safety (Construction Work) Code of Practice 2015

Australian Capital Territory

Acts and regulations

Work Health and Safety Act 2011
Work Health and Safety Regulation 2011

Codes of practice

Work Health and Safety (First Aid in the Workplace Code of Practice) Approval 2020
Work Health and Safety (How to Manage Work Health and Safety Risks Code of Practice) Approval 2025
Work Health and Safety (Managing the Work Environment and Facilities) Code of Practice 2025
Work Health and Safety (Construction Work Code of Practice) Approval 2025

Queensland

Acts and regulations

Work Health and Safety Act 2011
Work Health and Safety Regulation 2011

Codes of practice

First Aid in the Workplace Code of Practice 2021
How to Manage Work Health and Safety Risks Code of Practice 2021
Managing the Work Environment and Facilities Code of Practice 2021

New South Wales

Acts and regulations

Work Health and Safety Act 2011
Work Health and Safety Regulation 2025

Codes of practice

First Aid in the workplace code of practice 2020
How to manage work health and safety risks code of practice 2019
Managing the work environment and facilities code of practice 2019
Construction work code of practice 2019

Northern Territory

Acts and regulations

Work Health and Safety (National Uniform Legislation) Act 2011
Work Health and Safety (National Uniform Legislation) Regulations 2011

Codes of practice

First aid in the workplace – Code of practice 2022
How to manage work health and safety risks - Code of practice 2026
Managing the work environment and facilities - Code of practice 2026
Construction work - code of practice 2026

South Australia

Acts and regulations

Work Health and Safety Act 2012
Work Health and Safety Regulation 2012

Codes of practice

First Aid in the Workplace: Code of practice 2020
How to Manage Work Health and Safety Risks: Code of practice 2020
Managing the Work Environment and Facilities: Code of practice 2020
Construction work Code of Practice 2024

Tasmania

Acts and regulations

Work Health and Safety Act 2012
Work Health and Safety Regulations 2022

Codes of practice

First Aid in the Workplace - Code of practice 2020
How to Manage Work Health and Safety Risks - Code of practice 2024
Managing the Work Environment and Facilities - Code of practice 2024
Construction Work - Code of practice 2024

Western Australia

Acts and regulations

Work Health and Safety Act 2020
Work Health and Safety (General) Regulations 2022

Codes of practice

First aid in the workplace - Code of Practice 2022
How to manage work health and safety risks – Code of practice 2022
Managing the work environment and facilities – Code of practice 2022
Construction work – Code of practice 2022

Victoria

Acts and regulations

Occupational Health and Safety Act 2004
Occupational Health and Safety Regulations 2017

Personal protective equipment (PPE)

Foot Protection
Head Protection
Eye Protection
Hand Protection
Protective Clothing
Sun Protection
Safety Harness

Do not wear rings, watches or jewellery that may become entangled. Long and loose hair must be tied back.

Job steps, hazards and controls

Work activity
Arrival on-site & assess onsite conditions
- Hazard
  Personal injury, property damage &/or environmental incident
  Before controls3 High
  Controls
  - The vehicle should be positioned in a safe location, clear of traffic/vehicles/pedestrians during equipment delivery and materials removal (deploy physical barriers, caution signs as necessary)
  - Do not park illegally
  - Identify and obey all safety-related signage (check site entry requirements)
  - Report to Site Supervisor
  - Ensure site-specific induction undertaken
  - Assess mobile phone reception
  - The worksite is exactly as detailed in Terms of Agreement or contract
  - Complete a JSA specifying the control measures for unanticipated hazards.
  After controls2 Moderate
  Responsible
  - SupervisorCheck the site and conduct JSA where necessary

IR before controls · RR after controls1 LLow2 MModerate3 HHigh4 AAcute

Overall risk after controls2 MModeratethe highest rating after controls

Work activity
Work area set-up
Protect edges and openings, check the working surface, barricade exclusion zones and check the weather.
Work activity
Conduct a risk assessment
Assess the work at height with the checklist and adopt the highest possible level of fall control.
Work activity
Environment
Manage noise, waste, spills, wash-out, weeds, vehicle movement and animals on site.
Work activity
Housekeeping
Keep the work area tidy and lit, clean up spills and wear suitable non-slip footwear.
Work activity
Manual tasks
Keep materials close, know the weight, use team or mechanical lifts and rotate jobs.
Work activity
Working at height on fixed structures
Check the working surface, keep edge protection in place, and cover and secure holes and openings.
Work activity
Working on vehicles/mobile plant
Face the machine and keep three points of contact when mounting and dismounting.
Work activity
Working at height using a fall arrest system – the safety harness
Inspect and fit the harness, plan the fall arrest system and anchor points, and rehearse the rescue plan.
Work activity
Working at height on fixed scaffold
Use a scaffold signed off by a competent person, keep within its safe working load and barricade the drop zone.
Work activity
Working at height on mobile scaffolding & trestles
Lock the castors, never move a mobile scaffold with people or materials on it, set up trestles correctly and stay clear of power lines.
Work activity
Working at height > 2m on extension or single ladder
Use the ladder for access only, set it up on a stable base, secure it and keep three points of contact.
Work activity
Working on platform ladders
Use an inspected industrial-grade platform ladder, fully opened with the spreaders locked.
Work activity
Using vertical ladders
Inspect the vertical ladder and its safety hoops, face it and keep three points of contact.
Work activity
General work at height
Barricade and sign exclusion zones and secure tools and materials so nothing falls.
Work activity
On completion
Dismantle mobile scaffolds and trestles in a planned way, remove or add barricades and sign everyone out.
Work activity
Emergency response
Call 000, follow site emergency procedures, give first aid and report the incident.

Permits

Plant & equipment

Hazardous substances

Supervisory arrangements

SWMS sign-off

This SWMS developed in consultation and cooperation with workers and relevant organisation representatives. I have read the above SWMS, and I understand its contents. I confirm that I have the skills and training, including relevant certification, to conduct the task as described. I agree to comply with safety requirements within this SWMS, including risk control measures, safe work instructions, and PPE described.

Worker’s name	Job role / positione.g. supervisor, worker, trainee	Licences, competencies & qualificationsType / descriptionClassNumber	Date	Signature
-	-	-	-	-
-	-	-	-	-
-	-	-	-	-
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)

Hierarchy of controls

Risk matrix

Step 1: Determine likelihood

Step 2: Determine consequence

Step 3: Determine the risk score

Likelihood ↑	InsignificantNo effect, or so minor that the effect is acceptable	MinorMinor first aid treatment, minimal business disruption, minimal environmental effect	ModerateSerious injuries, medium business interruption, medium environmental impact	MajorExtensive injuries or fatality, significant business interruption, environmental harm, prosecution	CatastrophicMultiple permanent disabilities or fatalities, business failure, substantial environmental harm, prosecution or imprisonment
	Consequence →
Almost certainExpected in most circumstances	2 Moderate	2 Moderate	3 High	4 Acute	4 Acute
LikelyWill probably occur in most circumstances	2 Moderate	2 Moderate	3 High	4 Acute	4 Acute
PossibleCould possibly occur at some time	1 Low	2 Moderate	2 Moderate	3 High	4 Acute
UnlikelyUnlikely but possible	1 Low	1 Low	2 Moderate	3 High	4 Acute
RareHighly unlikely to occur	1 Low	1 Low	2 Moderate	2 Moderate	3 High

1 LowRecord and monitor. Proceed with work, and review the risks regularly.
2 ModerateMaintain control measures. Be cautious when working, and monitor and review regularly.
3 HighReview before commencing work. Introduce new controls or maintain high-level controls to lower the risk level, and monitor the controls frequently.
4 AcuteDo not proceed until the risk level is reduced. Immediately introduce high-level controls, and re-assess before proceeding.

Step 4: Record risk

16 خطوات عمل أخرى، من Work area set-up إلى Emergency response

لكل منها مخاطرها وتقييمات خطورتها وإجراءات التحكم فيها، إضافة إلى توقيع طاقمك.

جرّب المحرّر مجانًا احصل على حزمة التوفير هذه

كيف يبدو في المتصفح

احصل على حزمة التوفير هذه

سجّل مجانًا، ثم اختر الطريقة التي تناسبك. يُضاف كل مستند إلى مكتبتك، في مجلد يحمل اسم الحزمة.

مشمول في الخطط المدفوعة
استخدم أرصدة النماذج من خطتك. تكلفة هذه الحزمة 28 بدلًا من 37.
قارن الخطط والأسعار
اشترِه مرة واحدة
$2,518.60 ~~$3,328.15~~ تُدفع مرة واحدة، ويبقى ملكك. يعمل على الخطة المجانية أيضًا.

جرّب المحرّر مجانًا سجّل مجانًا

لا حاجة إلى بطاقة للتسجيل. يحصل أعضاء الوصول المبكر على خصم 30% على أي خطة.

ما يتضمنه

Height Access Equipment
SWMS · 17 خطوات عمل
Height Access Equipment SWMS: 17 job steps covering fixed and mobile scaffolds, trestles, extension, platform and vertical ladders, and safety harnesses.
يُباع أيضًا منفردًا
Internal External Lock-Up Fix Stage Carpentry
SWMS · 15 خطوات عمل
Covers internal and external lock-up and fix stage carpentry, with the risks and controls for each job step from site arrival to emergency response.
يُباع أيضًا منفردًا
Battery Charging and Handling
SOP · 7 أقسام
Safe operating procedure for charging and handling batteries: hazards, emergency response to acid splashes, PPE, precautions, recharging area and battery movement.
يُباع أيضًا منفردًا
Painting and Decorating
SWMS · 15 خطوات عمل
SWMS for painting and decorating work: transport, site set-up, ladders and scaffolds, surface preparation, mixing, spraying and emergencies.
يُباع أيضًا منفردًا
Glazing
SWMS · 15 خطوات عمل
A glazing SWMS covering cutting, drilling, grinding and installing glass balustrades, windows, doors, shower screens and mirrors.
يُباع أيضًا منفردًا
Table Saw
SOP · 9 أقسام
Safe operating procedure for a table saw: hazards, PPE, precautions, pre-operational inspection, operation, kickback prevention and a hazard checklist.
يُباع أيضًا منفردًا
Soft Demolition
SWMS · 20 خطوات عمل
SWMS for soft demolition and strip-out: asbestos, silica dust, glass removal, working at height, tools, waste and emergency response.
يُباع أيضًا منفردًا
Reciprocating Saw
SOP · 9 أقسام
Safe operating procedure for a reciprocating saw: hazards, PPE, training, pre-operational inspection, maintenance, operation, first aid and a hazard checklist.
يُباع أيضًا منفردًا
Trestle Scaffold
SOP · 7 أقسام
Safe operating procedure for trestle scaffolds: hazards, PPE, training, pre-operational inspection, step-by-step operation and a training register.
يُباع أيضًا منفردًا
Plasterboard
SWMS · 16 خطوات عمل
Plasterboard SWMS for fixing and setting sheets to walls and ceilings, with cornice: 16 job steps from silica dust training to cutting, sanding and stilts.
يُباع أيضًا منفردًا
Electric Air Compressor
SOP · 9 أقسام
Safe operating procedure for an electric air compressor: hazards, PPE, inspection, operation, cleaning and a hazard checklist.
يُباع أيضًا منفردًا
Manual Handling
SOP · 5 أقسام
Safe operating procedure for manual handling: hazards, precautions, standard and team lifts, and a manual handling risk assessment form.
يُباع أيضًا منفردًا
Site Establishment Shop Fit-out
SWMS · 10 خطوات عمل
Site Establishment Shop Fit-out SWMS: 10 job steps from planning and arrival to powered tools, completion and emergency response.
يُباع أيضًا منفردًا
Handheld Circular Saw
SOP · 8 أقسام
Safe operating procedure for a handheld circular saw: hazards, PPE, precautions, inspection, operation, kickback and a hazard checklist.
يُباع أيضًا منفردًا
Nail Gun - Battery Operated -
SOP · 8 أقسام
Safe operating procedure for a battery-operated nail gun: hazards, PPE, battery charging, operation, jammed nails and a training register.
يُباع أيضًا منفردًا
EWP, Boom, Cherry Picker and Scissor Lift
SWMS · 12 خطوات عمل
EWP SWMS for scissor lifts, boom lifts and cherry pickers: 12 job steps, from rescue planning and set-up to working at height, fuelling and recharging.
يُباع أيضًا منفردًا
Silica Dust
SWMS · 14 خطوات عمل
Silica Dust SWMS: 14 job steps covering RCS dust control, wet cutting, dust extraction, RPE, the 30-day health monitoring trigger and clean-up.
يُباع أيضًا منفردًا
Platform Ladder
SOP · 7 أقسام
Safe operating procedure for platform ladders: hazards, PPE, pre-operational inspection, transporting, set-up and use, and a training register.
يُباع أيضًا منفردًا
Docking Saw
SOP · 10 أقسام
Safe operating procedure for a docking saw: hazards, PPE, pre-operational inspection, maintenance, step-by-step operation and a hazard checklist.
يُباع أيضًا منفردًا
V Cut Mitre Saw
SOP · 10 أقسام
Safe operating procedure for a V cut mitre saw: hazards, PPE, training, inspection, blade replacement, operation, maintenance and a hazard checklist.
يُباع أيضًا منفردًا
Angle Grinder
SOP · 9 أقسام
Safe operating procedure for an angle grinder: hazards, PPE, inspection, precautions, operation, changing discs, maintenance and a hazard checklist.
يُباع أيضًا منفردًا
Pneumatic Tools
SOP · 8 أقسام
Safe operating procedure for pneumatic tools: hazards, PPE, precautions, maintenance, pre-operational inspection, operation and a hazard checklist.
يُباع أيضًا منفردًا
Jigsaw
SOP · 9 أقسام
Safe operating procedure for a jigsaw: hazards, PPE, training, pre-operational inspection, operation, blade replacement, maintenance and a hazard checklist.
يُباع أيضًا منفردًا
Mitre/Drop Saw
SOP · 8 أقسام
Safe operating procedure for a mitre or drop saw: hazards, PPE, precautions, inspection, maintenance, operation, blade replacement and a hazard checklist.
يُباع أيضًا منفردًا
Hand Tools
SOP · 9 أقسام
Safe operating procedure for using hand tools: hazards, PPE, inspection, training, work environment, manual handling and storage.
يُباع أيضًا منفردًا
Handheld Router
SOP · 9 أقسام
Safe operating procedure for a handheld router: hazards, PPE, training, inspection, maintenance, operating steps and a hazard checklist.
يُباع أيضًا منفردًا
Cabinet Installation
SWMS · 12 خطوات عمل
SWMS for cabinet making and installation: client consultation, site set-up, tools, hazardous substances, dust control, ladders, cuts and emergencies.
يُباع أيضًا منفردًا
Suspended Grid System Ceiling Installation
SWMS · 12 خطوات عمل
Suspended grid system ceiling installation SWMS: 12 job steps covering ladders and trestles, silica dust, falling objects, mobile plant and emergencies.
يُباع أيضًا منفردًا
Powered Non-powered Tools
SWMS · 12 خطوات عمل
Hazards and controls for hand-held power tools and non-powered tools, from site set-up and pre-start checks to emergency response.
يُباع أيضًا منفردًا
Scissor Lift
SOP · 10 أقسام
Safe operating procedure for an EWP scissor lift: hazards, PPE, precautions, inspection, operation, maintenance, emergency response and a hazard checklist.
يُباع أيضًا منفردًا
Manual Handling
SWMS · 18 خطوات عمل
Manual Handling SWMS: 18 job steps covering lifting and carrying, team lifts, lifting aids, sustained postures, ergonomics, driving, and people and animal handling.
يُباع أيضًا منفردًا
Tiling
SWMS · 14 خطوات عمل
Tiling SWMS: 14 job steps covering silica dust, weather, delivery, ladders and scaffold, tile cutting, completion and emergencies.
يُباع أيضًا منفردًا
Partitioning Steel-Stud-Track
SWMS · 12 خطوات عمل
Covers installing steel, stud and track partitioning in commercial premises, with the risks and controls for each job step from silica training to emergency response.
يُباع أيضًا منفردًا
Nail Gun - Pneumatic -
SOP · 8 أقسام
Safe operating procedure for a pneumatic nail gun: hazards, PPE, training, inspection, maintenance, operation, jammed nails and a hazard checklist.
يُباع أيضًا منفردًا
Working with Guarded Machinery
SOP · 12 أقسام
Safe operating procedure for working with or near guarded machinery: hazards, PPE, maintenance and LOTO, cleaning, reporting and a hazard checklist.
يُباع أيضًا منفردًا
Mobile Scaffolding
SOP · 8 أقسام
Safe operating procedure for mobile scaffolding: hazards, PPE, inspection, erecting, moving and dismantling, and a working at height checklist.
يُباع أيضًا منفردًا
Handheld Drill
SOP · 9 أقسام
Safe operating procedure for a handheld drill: hazards, PPE, precautions, pre-operational inspection, operation, maintenance and a hazard checklist.
يُباع أيضًا منفردًا

ما يغطيه

المخاطر التي يغطيها

التشريعات والمعايير التي يستند إليها

يأتي كل SWMS مع قائمة مراجع التشريعات ومدونات الممارسة الخاصة بنا.

ما توفّره

النموذج	خطوات العمل	منفردًا
Height Access Equipment	17	$89.95 · رصيد واحد
Internal External Lock-Up Fix Stage Carpentry	15	$89.95 · رصيد واحد
Battery Charging and Handling	0	$89.95 · رصيد واحد
Painting and Decorating	15	$89.95 · رصيد واحد
Glazing	15	$89.95 · رصيد واحد
Table Saw	0	$89.95 · رصيد واحد
Soft Demolition	20	$89.95 · رصيد واحد
Reciprocating Saw	0	$89.95 · رصيد واحد
Trestle Scaffold	0	$89.95 · رصيد واحد
Plasterboard	16	$89.95 · رصيد واحد
Electric Air Compressor	0	$89.95 · رصيد واحد
Manual Handling	0	$89.95 · رصيد واحد
Site Establishment Shop Fit-out	10	$89.95 · رصيد واحد
Handheld Circular Saw	0	$89.95 · رصيد واحد
Nail Gun - Battery Operated -	0	$89.95 · رصيد واحد
EWP, Boom, Cherry Picker and Scissor Lift	12	$89.95 · رصيد واحد
Silica Dust	14	$89.95 · رصيد واحد
Platform Ladder	0	$89.95 · رصيد واحد
Docking Saw	0	$89.95 · رصيد واحد
V Cut Mitre Saw	0	$89.95 · رصيد واحد
Angle Grinder	0	$89.95 · رصيد واحد
Pneumatic Tools	0	$89.95 · رصيد واحد
Jigsaw	0	$89.95 · رصيد واحد
Mitre/Drop Saw	0	$89.95 · رصيد واحد
Hand Tools	0	$89.95 · رصيد واحد
Handheld Router	0	$89.95 · رصيد واحد
Cabinet Installation	12	$89.95 · رصيد واحد
Suspended Grid System Ceiling Installation	12	$89.95 · رصيد واحد
Powered Non-powered Tools	12	$89.95 · رصيد واحد
Scissor Lift	0	$89.95 · رصيد واحد
Manual Handling	18	$89.95 · رصيد واحد
Tiling	14	$89.95 · رصيد واحد
Partitioning Steel-Stud-Track	12	$89.95 · رصيد واحد
Nail Gun - Pneumatic -	0	$89.95 · رصيد واحد
Working with Guarded Machinery	0	$89.95 · رصيد واحد
Mobile Scaffolding	0	$89.95 · رصيد واحد
Handheld Drill	0	$89.95 · رصيد واحد
عند الشراء واحدًا تلو الآخر		~~$3,328.15~~ · 37 أرصدة
ضمن هذه الحزمة		$2,518.60 · 28 أرصدة توفّر $809.55

المراجعات

لا توجد مراجعات بعد.

كيف تعمل النماذج

جرّبه قبل أن تدفع.

معاينة مجانية
خطوات العمل والمخاطر والمهمة الأولى في كل نموذج متاحة للقراءة. دون تسجيل.
جرّب المحرّر
كيّف بيان SWMS تجريبيًا باسم شركتك ومهمتك وموقعك، على الحاسوب أو هاتفك.
سجّل مجانًا
تنتقل بياناتك وشعارك معك. وهذا النموذج يُفتح معبّأً مسبقًا.
استخدم رصيدًا أو اشترِ مرة واحدة
تتضمن الخطط المدفوعة أرصدة نماذج كل شهر. أو اشترِ هذا النموذج ليبقى لك.

Shop-fitting Combo

معاينة SWMS Height Access Equipment

Site management plan

High-risk construction work (HRCW)

Working with a risk of a fall over 2 metres

Planning and preparation

Hold points

Training/licence

Worker duties and responsibilities

Monitor/review

Site-specific notes

Legislation and codes of practice

Personal protective equipment (PPE)

Job steps, hazards and controls

احصل على حزمة التوفير هذه

مشمول في الخطط المدفوعة

اشترِه مرة واحدة

ما يتضمنه

ما يغطيه

المخاطر التي يغطيها

التشريعات والمعايير التي يستند إليها

ما توفّره

المراجعات

جرّبه قبل أن تدفع.

معاينة مجانية

جرّب المحرّر

سجّل مجانًا

استخدم رصيدًا أو اشترِ مرة واحدة