Các tài liệu mẫu được soạn bằng tiếng Anh.

Gói tiết kiệm · 24 mẫuThuộc HVAC-Refrigeration

Refrigerant Gas

SWMS · SWMS-10213

9 bước công việc
Phiên bản 7

This SWMS covers the hazards and controls for the safe use of fluorocarbon refrigerants, such as hydrochlorofluorocarbons (HCFC), hydrofluorocarbons (HFC) and chlorofluorocarbons (CFC).

It takes your crew through each job step: training and licensing, cylinder transport, work area set-up, protecting the environment, pre-operational inspection, general use, storing refrigerants, completion and emergency response to exposure and leaks.

It suits businesses and workers in the HVAC industry, refrigeration services and any other work that handles fluorocarbon refrigerants.

Xem trang riêng

Refrigerant Gas

SWMSVersion 7

Company doing the work: [Company]
Business contact and phone: —
Responsible person (for monitoring SWMS and work): —
Responsible person's phone: —
Responsible person's signature: —
Date signed: —

Principal contractor (PC): [Principal contractor]
PC address: —
PC phone: [PC phone]
Date SWMS provided to PC: —
Job site address: [Site address]
Part of a construction project: —

Site management plan

If the work is part of a construction project, this SWMS must align with requirements of the Site Management Plan in place for the Construction Project.

High-risk construction work (HRCW)

This work activity involves the following “High-Risk Construction Work” (HRCW - identified in the Job Task column)

Hazardous LinesWork on or near chemical, fuel or refrigerant lines

Planning and preparation

Planning

Liaise with Principal Contractor to identify on-site safety systems and procedures
Establish supervisory and communication arrangements
Principal contractor to confirm emergency response procedures are in place.

Hold points

Hold points identified and signed off before continuing work. (specify the hold points)

Training and licences

All workers to have a General Construction Induction Card
Relevant workers have relevant certificates of competency, licenses, and training. Specify on the SWMS Sign-off for each worker.
Trained First Aider on site
All workers trained in site-specific emergency and evacuation procedures, SWMS, safe work procedures, and safety data sheets.

Worker duties and responsibilities

Fit condition for work, i.e., no signs of fatigue, alcohol or drugs
Attend all site inductions/briefings
Comply with all site requirements, e.g. PPE, Traffic Management Plans (TMP)
Only carry out work related to the contract
Inspect completed work and report possible safety, environmental and quality matters to the supervisor.

Monitoring and review

All people involved in the task must have this SWMS communicated to them before work commences
SWMS to be reviewed and amended if necessary, in consultation with relevant people after any near miss or incident
If additional site hazards identified, review this SWMS and amend control measures to suit
People, including workers, contractors and sub-contractors, affected by the revisions to this SWMS, must be informed ASAP
Give the principal contractor a copy of the revised SWMS
The site supervisor to monitor works against the controls stated in this SWMS
SWMS must be kept on-site and made available for inspection or review
Keep a record of this SWMS until the job is complete or for two years if involved in a notifiable incident
Regardless of any other factor, the person in control of the workplace must review this SWMS at least annually.

Site-specific notes

Legislation and codes of practice

Australian Government

Acts and regulations

Work Health and Safety Act 2011
Work Health and Safety Regulations 2011

Codes of practice

Work Health and Safety (First Aid in the Workplace) Code of Practice 2015
Work Health and Safety (How to Manage Work Health and Safety Risks) Code of Practice 2015
Work Health and Safety (Managing Risks of Hazardous Chemicals in the Workplace) Code of Practice 2015
Work Health and Safety (Managing the Work Environment and Facilities) Code of Practice 2015
Work Health and Safety (Construction Work) Code of Practice 2015

Australian Capital Territory

Acts and regulations

Work Health and Safety Act 2011
Work Health and Safety Regulation 2011

Codes of practice

Work Health and Safety (First Aid in the Workplace Code of Practice) Approval 2020
Work Health and Safety (How to Manage Work Health and Safety Risks Code of Practice) Approval 2025
Work Health and Safety (Managing the Work Environment and Facilities) Code of Practice 2025
Work Health and Safety (Construction Work Code of Practice) Approval 2025
Work Health and Safety (Managing Risks of Hazardous Chemicals in the Workplace Code of Practice) Approval 2022

Queensland

Acts and regulations

Work Health and Safety Act 2011
Work Health and Safety Regulation 2011

Codes of practice

First Aid in the Workplace Code of Practice 2021
How to Manage Work Health and Safety Risks Code of Practice 2021
Managing Risks of Hazardous Chemicals in the Workplace Code of Practice 2021
Managing the Work Environment and Facilities Code of Practice 2021

New South Wales

Acts and regulations

Work Health and Safety Act 2011
Work Health and Safety Regulation 2025

Codes of practice

First Aid in the workplace code of practice 2020
How to manage work health and safety risks code of practice 2019
Managing the work environment and facilities code of practice 2019
Managing risks of hazardous chemicals in the workplace code of practice 2022
Construction work code of practice 2019

Northern Territory

Acts and regulations

Work Health and Safety (National Uniform Legislation) Act 2011
Work Health and Safety (National Uniform Legislation) Regulations 2011

Codes of practice

First aid in the workplace – Code of practice 2022
How to manage work health and safety risks - Code of practice 2026
Managing risks of hazardous chemicals in the workplace Code of Practice 2020
Managing the work environment and facilities - Code of practice 2026
Construction work - code of practice 2026

South Australia

Acts and regulations

Work Health and Safety Act 2012
Work Health and Safety Regulation 2012

Codes of practice

First Aid in the Workplace: Code of practice 2020
How to Manage Work Health and Safety Risks: Code of practice 2020
Managing Risks of Hazardous Chemicals in the Workplace: Code of practice 2024
Managing the Work Environment and Facilities: Code of practice 2020
Construction work Code of Practice 2024

Tasmania

Acts and regulations

Work Health and Safety Act 2012
Work Health and Safety Regulations 2022

Codes of practice

First Aid in the Workplace - Code of practice 2020
How to Manage Work Health and Safety Risks - Code of practice 2024
Managing the Work Environment and Facilities - Code of practice 2024
Construction Work - Code of practice 2024
Managing Risks of Hazardous Chemicals in the Workplace - Code of practice 2018

Western Australia

Acts and regulations

Work Health and Safety Act 2020
Work Health and Safety (General) Regulations 2022

Codes of practice

First aid in the workplace - Code of Practice 2022
How to manage work health and safety risks – Code of practice 2022
Managing risks of hazardous chemicals in the workplace – Code of practice 2022
Managing the work environment and facilities – Code of practice 2022
Construction work – Code of practice 2022

Victoria

Acts and regulations

Occupational Health and Safety Act 2004
Occupational Health and Safety Regulations 2017

Personal protective equipment (PPE)

Foot Protection
Eye Protection
Hand Protection
Protective Clothing
Breathing Protection

Do not wear rings, watches or jewellery that may become entangled. Long and loose hair must be tied back.

Job steps, hazards and controls

Work activity
Training
- Hazard
  Unlicensed operator
  Before controls3 High
  Controls
  - Ensure workers only perform tasks permitted by their licence. Example:
    Refrigerant Handling Licence
    Restricted Refrigerant Handling Licence
    Trainee Refrigerant Handling Licence.
  After controls2 Moderate
  Responsible
  - Supervisor

IR before controls · RR after controls1 LLow2 MModerate3 HHigh4 AAcute

Overall risk after controls2 MModeratethe highest rating after controls

Work activity
Cylinder transport
Transport cylinders secured, upright, leak-free and out of the main cabin.
Work activity
Work area set-up
Set up the work area to avoid cylinder damage, gas contact and manual handling injuries.
Work activity
Environment
Recover and return refrigerant so none escapes to the atmosphere.
Work activity
Pre-operational inspection
Inspect refrigerant gases, cylinders, PPE and leak detectors before use.
Work activity
General use
Fill and discharge refrigerant safely, avoiding vapours and skin contact.
Work activity
Storage of refrigerants
Store cylinders cool, ventilated, labelled and clear of reactive substances.
Work activity
On completion
Secure cylinders for transport and clean up the work area.
Work activity
Emergency response
Respond to frostbite, eye contact, inhalation and other emergencies.

Permits

Plant and equipment

Hazardous substances

Supervisory arrangements

SWMS sign-off

This SWMS developed in consultation and cooperation with workers and relevant organisation representatives. I have read the above SWMS, and I understand its contents. I confirm that I have the skills and training, including relevant certification, to conduct the task as described. I agree to comply with safety requirements within this SWMS, including risk control measures, safe work instructions, and PPE described.

Worker’s name	Job role / positione.g. supervisor, worker, trainee	Licences, competencies & qualificationsType / descriptionClassNumber	Date	Signature
-	-	-	-	-
-	-	-	-	-
-	-	-	-	-
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)

Hierarchy of controls

Risk matrix

Step 1: Determine likelihood

Step 2: Determine consequence

Step 3: Determine the risk score

Likelihood ↑	InsignificantNo effect, or so minor that the effect is acceptable	MinorMinor first aid treatment, minimal business disruption, minimal environmental effect	ModerateSerious injuries, medium business interruption, medium environmental impact	MajorExtensive injuries or fatality, significant business interruption, environmental harm, prosecution	CatastrophicMultiple permanent disabilities or fatalities, business failure, substantial environmental harm, prosecution or imprisonment
	Consequence →
Almost certainExpected in most circumstances	2 Moderate	2 Moderate	3 High	4 Acute	4 Acute
LikelyWill probably occur in most circumstances	2 Moderate	2 Moderate	3 High	4 Acute	4 Acute
PossibleCould possibly occur at some time	1 Low	2 Moderate	2 Moderate	3 High	4 Acute
UnlikelyUnlikely but possible	1 Low	1 Low	2 Moderate	3 High	4 Acute
RareHighly unlikely to occur	1 Low	1 Low	2 Moderate	2 Moderate	3 High

1 LowRecord and monitor. Proceed with work, and review the risks regularly.
2 ModerateMaintain control measures. Be cautious when working, and monitor and review regularly.
3 HighReview before commencing work. Introduce new controls or maintain high-level controls to lower the risk level, and monitor the controls frequently.
4 AcuteDo not proceed until the risk level is reduced. Immediately introduce high-level controls, and re-assess before proceeding.

Step 4: Record risk

Thêm 8 bước công việc, từ Cylinder transport đến Emergency response

Mỗi bước đều có mối nguy, mức rủi ro và biện pháp kiểm soát, cùng phần ký nhận của đội.

Dùng thử trình soạn thảo miễn phí Lấy gói tiết kiệm này

Hiển thị thế nào trên trình duyệt

Lấy gói tiết kiệm này

Đăng ký miễn phí, rồi chọn cách bạn muốn lấy. Mọi tài liệu sẽ vào Thư viện của bạn, trong một thư mục mang tên gói.

Có trong các gói trả phí
Dùng lượt mở mẫu trong gói dịch vụ của bạn. Gói này cần 13 lượt thay vì 24 lượt.
So sánh các gói và giá
Mua một lần
$1,169.35 ~~$2,158.80~~ trả một lần, và mẫu là của bạn mãi mãi. Dùng được cả với gói Miễn phí.

Dùng thử trình soạn thảo miễn phí Đăng ký miễn phí

Không cần thẻ để đăng ký. Thành viên truy cập sớm được giảm 30% cho mọi gói.

Nội dung bao gồm

9 bước công việc

TrainingLimit each worker to the tasks their refrigerant handling licence permits.
Cylinder transportTransport cylinders secured, upright, leak-free and out of the main cabin.
Work area set-upSet up the work area to avoid cylinder damage, gas contact and manual handling injuries.
EnvironmentRecover and return refrigerant so none escapes to the atmosphere.
Pre-operational inspectionInspect refrigerant gases, cylinders, PPE and leak detectors before use.
General useFill and discharge refrigerant safely, avoiding vapours and skin contact.
Storage of refrigerantsStore cylinders cool, ventilated, labelled and clear of reactive substances.
On completionSecure cylinders for transport and clean up the work area.
Emergency responseRespond to frostbite, eye contact, inhalation and other emergencies.

Các mối nguy được đề cập

Luật và tiêu chuẩn được dẫn chiếu

Mỗi SWMS đều đi kèm danh sách tham chiếu luật và bộ quy tắc thực hành (codes of practice) của chúng tôi.

Cách các mẫu hoạt động

Dùng thử trước khi trả tiền.

Xem trước miễn phí
Các bước công việc, mối nguy và nhiệm vụ đầu tiên của mọi mẫu đều mở để đọc. Không cần đăng ký.
Thử trình soạn thảo
Chỉnh một SWMS demo theo công ty, công việc và công trường của bạn, trên máy tính hoặc điện thoại.
Đăng ký miễn phí
Thông tin và logo của bạn được chuyển sang. Mẫu này sẽ mở ra với thông tin đã điền sẵn.
Dùng một lượt hoặc mua một lần
Các gói trả phí có lượt mở mẫu mỗi tháng. Hoặc mua mẫu này để giữ lại.

Refrigerant Gas

Xem trước SWMS Refrigerant Gas

Site management plan

High-risk construction work (HRCW)

Planning and preparation

Planning

Hold points

Training and licences

Worker duties and responsibilities

Monitoring and review

Site-specific notes

Legislation and codes of practice

Personal protective equipment (PPE)

Job steps, hazards and controls

Lấy gói tiết kiệm này

Có trong các gói trả phí

Mua một lần

Nội dung bao gồm

9 bước công việc

Các mối nguy được đề cập

Luật và tiêu chuẩn được dẫn chiếu

Dùng thử trước khi trả tiền.

Xem trước miễn phí

Thử trình soạn thảo

Đăng ký miễn phí

Dùng một lượt hoặc mua một lần