超值套装 · 15 个模板属于Demolition

Acrow Props

SWMS · SWMS-10362

13 个工作步骤
版本 10

This Acrow Props Safe Work Method Statement (SWMS) helps workers understand the hazards and controls involved in using Acrow props to support overhead loads. It promotes safe practices and compliance with safety regulations.

It covers 13 job steps, from design specifications, arriving on site and setting up the work area to pre-inspection, installing props, inspecting and monitoring them, prop removal, completion and emergency response.

It includes detailed guidelines for pre-use and ongoing inspections to keep Acrow props in safe working condition, and controls for structural collapse, electrical contact, falling objects and manual tasks.

It suits construction companies, site supervisors and managers, and renovation and demolition services using temporary support structures.

查看单独页面

Acrow Props

SWMSVersion 10

Company doing the work: [Company]
Business contact and phone: —
Responsible person (for monitoring SWMS and work): —
Responsible person's phone: —
Responsible person's signature: —
Date signed: —

Principal Contractor (PC): —
PC Address: —
PC phone: —
Date SWMS provided to PC: —
Job Site Address: —
Part of a construction project: —

Site management plan

If the work is part of a construction project, this SWMS must align with requirements of the Site Management Plan in place for the Construction Project.

High-risk construction work

This work activity involves the following “High-Risk Construction Work” (HRCW - identified in the Job Task column)

Structural AlterationsStructures or buildings involving structural alterations or repairs that require temporary support to prevent collapse

Planning and preparation

Planning

Liaise with Principal Contractor to identify on-site safety systems and procedures
Establish supervisory and communication arrangements
Principal contractor to confirm emergency response procedures are in place.

Hold points

Hold points identified and signed off before continuing work. (specify the hold points)

Training and licences

All workers to have a General Construction Induction Card
Relevant workers have relevant certificates of competency, licenses, and training. Specify on the SWMS Sign-off for each worker.
Trained First Aider on site
All workers trained in site-specific emergency and evacuation procedures, SWMS, safe work procedures, and safety data sheets.

Worker duties and responsibilities

Fit condition for work, i.e., no signs of fatigue, alcohol or drugs
Attend all site inductions/briefings
Comply with all site requirements, e.g. PPE, Traffic Management Plans (TMP)
Only carry out work related to the contract
Inspect completed work and report possible safety, environmental and quality matters to the supervisor.

Monitoring and review

All people involved in the task must have this SWMS communicated to them before work commences
SWMS to be reviewed and amended if necessary, in consultation with relevant people after any near miss or incident
If additional site hazards identified, review this SWMS and amend control measures to suit
People, including workers, contractors and sub-contractors, affected by the revisions to this SWMS, must be informed ASAP
Give the principal contractor a copy of the revised SWMS
The site supervisor to monitor works against the controls stated in this SWMS
SWMS must be kept on-site and made available for inspection or review
Keep a record of this SWMS until the job is complete or for two years if involved in a notifiable incident
Regardless of any other factor, the person in control of the workplace must review this SWMS at least annually.

Site-specific notes

Legislation and codes of practice

None listed.

Personal protective equipment (PPE)

Foot Protection
High Visibility
Head Protection
Hand Protection

Job steps, hazards and controls

Work activity
Design specifications
- Hazard
  Structural collapse
  Before controls4 Acute
  Controls
  - Design specifications for prop type and placement must be undertaken by a qualified person (such as a structural engineer)
  - Ensure design specifications are written in a clear manner that installers can understand
  - Specifications should include drawings and measurements to clearly show this information and include the exact make and model to be used
  - Ensure documentation is available on site for all props in use including make, model, size and safe working capacity in the various extensions and restraint configurations.
  After controls2 Moderate
  Responsible
  - Supervisorto ensure prop specifications are on site

IR before controls · RR after controls1 LLow2 MModerate3 HHigh4 AAcute

Overall risk after controls2 MModeratethe highest rating after controls

Work activity
Arrival on-site & assess onsite conditions
Park safely, report in and check the site
Work activity
Work area setup
Clear and barricade the area around the props
Work activity
Environment
Manage waste, waterways, vegetation, vehicles and animals on site
Work activity
House keeping
Keep the area clean, lit and free of trip hazards
Work activity
Manual tasks
Place materials close by and lift safely
Work activity
Working with powered & non-powered tools
Use, check and power tools safely
Work activity
Pre-inspection
Inspect the props and check them against the specifications
Work activity
Installing props
Install, brace and lock the props to prevent movement
Work activity
Inspect & monitor
Inspect the props and locks at least weekly
Work activity
Prop removal
Get engineering advice, then lower and remove the props
Work activity
On completion
Secure the area, check the props and sign out
Work activity
Emergency response
Call 000, follow emergency procedures and give first aid

Permits

Plant and equipment

Hazardous substances

Supervisory arrangements

SWMS Sign-off

This SWMS developed in consultation and cooperation with workers and relevant organisation representatives. I have read the above SWMS, and I understand its contents. I confirm that I have the skills and training, including relevant certification, to conduct the task as described. I agree to comply with safety requirements within this SWMS, including risk control measures, safe work instructions, and PPE described.

Worker’s name	Job role / positione.g. supervisor, worker, trainee	Licences, competencies & qualificationsType / descriptionClassNumber	Date	Signature
-	-	-	-	-
-	-	-	-	-
-	-	-	-	-
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)

Hierarchy of controls

Risk matrix

Step 1: Determine likelihood

Step 2: Determine consequence

Step 3: Determine the risk score

Likelihood ↑	InsignificantNo effect, or so minor that the effect is acceptable	MinorMinor first aid treatment, minimal business disruption, minimal environmental effect	ModerateSerious injuries, medium business interruption, medium environmental impact	MajorExtensive injuries or fatality, significant business interruption, environmental harm, prosecution	CatastrophicMultiple permanent disabilities or fatalities, business failure, substantial environmental harm, prosecution or imprisonment
	Consequence →
Almost certainExpected in most circumstances	2 Moderate	2 Moderate	3 High	4 Acute	4 Acute
LikelyWill probably occur in most circumstances	2 Moderate	2 Moderate	3 High	4 Acute	4 Acute
PossibleCould possibly occur at some time	1 Low	2 Moderate	2 Moderate	3 High	4 Acute
UnlikelyUnlikely but possible	1 Low	1 Low	2 Moderate	3 High	4 Acute
RareHighly unlikely to occur	1 Low	1 Low	2 Moderate	2 Moderate	3 High

1 LowRecord and monitor. Proceed with work, and review the risks regularly.
2 ModerateMaintain control measures. Be cautious when working, and monitor and review regularly.
3 HighReview before commencing work. Introduce new controls or maintain high-level controls to lower the risk level, and monitor the controls frequently.
4 AcuteDo not proceed until the risk level is reduced. Immediately introduce high-level controls, and re-assess before proceeding.

Step 4: Record risk

还有 12 个工作步骤，从“Arrival on-site & assess onsite conditions”到“Emergency response”

每一步都有危险、风险等级和控制措施，另附工人签到。

免费试用编辑器获取这个超值套装

在浏览器中的样子

获取这个超值套装

免费注册，然后选择获取方式。每份文件都会放进你的模板库，存在以套装命名的文件夹里。

付费套餐包含
使用套餐中的模板额度。本套装只需 11 个额度，而不是 15 个。
比较套餐和价格
单独购买
$989.45 ~~$1,349.25~~ 一次付清，永久归你。免费套餐也能用。

免费试用编辑器免费注册

注册无需银行卡。抢先体验会员购买任何套餐都可享 30% 折扣。

涵盖内容

13 个工作步骤

Design specificationsHave a qualified person specify the prop type and placement
Arrival on-site & assess onsite conditionsPark safely, report in and check the site
Work area setupClear and barricade the area around the props
EnvironmentManage waste, waterways, vegetation, vehicles and animals on site
House keepingKeep the area clean, lit and free of trip hazards
Manual tasksPlace materials close by and lift safely
Working with powered & non-powered toolsUse, check and power tools safely
Pre-inspectionInspect the props and check them against the specifications
Installing propsInstall, brace and lock the props to prevent movement
Inspect & monitorInspect the props and locks at least weekly
Prop removalGet engineering advice, then lower and remove the props
On completionSecure the area, check the props and sign out
Emergency responseCall 000, follow emergency procedures and give first aid

Acrow Props

Site management plan

High-risk construction work