Las plantillas están escritas en inglés.

Paquete ahorro · 24 plantillas

HVAC-Refrigeration

Paquete ahorro · PACK-50321

24 plantillas
24 por el precio de 13
Llega en una carpeta de la Biblioteca

A set of 24 SWMS for HVAC and refrigeration contractors: duct work, air conditioning installation and repairs, refrigerant gas, cool rooms, welding and confined spaces.

Each SWMS is the same one sold on its own, so you get every update to it. Together they cost 13 template credits instead of 24.

Silica Dust

SWMSVersion 8

Company doing the work: [Company]
Business contact and phone: —
Responsible person (for monitoring SWMS and work): —
Responsible person's phone: —
Responsible person's signature: —
Date signed: —

Principal contractor (PC): [Principal contractor]
PC address: —
PC phone: [PC phone]
Date SWMS provided to PC: —
Job site address: [Site address]
Part of a construction project: —

Site management plan

If the work is part of a construction project, this SWMS must align with the requirements of the site management plan in place for the project.

High-risk construction work (HRCW)

This work involves the following high-risk construction work (HRCW), identified in the job steps:

Hazardous AtmosphereWork in an area that may have a contaminated or flammable atmosphere
Mobile PlantWork in an area where there is any movement of powered mobile plant

Working with a risk of a fall over 2 metres

The fall from height hierarchy of control level considered when establishing controls:

L1Work on the ground or solid construction, not chosen
L2Use a passive fall restraint system, e.g. guard rails, scaffolding, EWP, not chosen
L3Use a work positioning system, e.g. travel restraint, rope access, not chosen
L4Use a fall arrest system, e.g. safety harness, catch platforms, not chosen
L5Implement administrative controls, e.g. signage or instruction, not chosen

No level has been chosen yet.

Planning and preparation

Liaise with the principal contractor to identify on-site safety systems and procedures
Establish supervisory and communication arrangements
The principal contractor confirms that emergency response procedures are in place

Hold points

Hold points identified and signed off before continuing work: (specify the hold points)

Training and licences

All workers have a general construction induction card (White Card)
Relevant workers have relevant certificates of competency, licences and training. Specify them for each worker on the SWMS sign-off.
A trained first aider is on site
All workers are trained in site-specific emergency and evacuation procedures, this SWMS, safe work procedures and safety data sheets

Worker duties and responsibilities

Be in a fit condition for work, i.e. no signs of fatigue, alcohol or drugs
Attend all site inductions and briefings
Comply with all site requirements, e.g. PPE, traffic management plans (TMP)
Only carry out work related to the contract
Inspect completed work and report possible safety, environmental and quality matters to the supervisor

Monitoring and review

All people involved in the task must have this SWMS communicated to them before work starts
Review this SWMS and amend it if necessary, in consultation with relevant people, after any near miss or incident
If additional site hazards are identified, review this SWMS and amend the control measures to suit
People affected by revisions to this SWMS, including workers, contractors and subcontractors, must be informed as soon as possible
Give the principal contractor a copy of the revised SWMS
The site supervisor monitors the work against the controls in this SWMS
This SWMS must be kept on site and made available for inspection or review
Keep a record of this SWMS until the job is complete, or for two years if it was involved in a notifiable incident
Regardless of any other factor, the person in control of the workplace must review this SWMS at least annually

Site-specific notes

(add any notes specific to this site)

Acts, regulations and codes of practice

Australian Government

Acts and regulations

Work Health and Safety Act 2011
Work Health and Safety Regulations 2011.

Codes of practice

Work Health and Safety (Managing Risks of Hazardous Chemicals in the Workplace) Code of Practice 2015

Australian Capital Territory

Acts and regulations

Work Health and Safety Act 2011
Work Health and Safety Regulation 2011

Codes of practice

Work Health and Safety (Managing Risks of Hazardous Chemicals in the Workplace Code of Practice) Approval 2022
Work Health and Safety (Managing the Risks of Airborne Crystalline Silica (Silica Dust) in the Workplace Code of Practice) 2024

Queensland

Acts and regulations

Work Health and Safety Act 2011
Work Health and Safety Regulation 2011

Codes of practice

Managing Risks of Hazardous Chemicals in the Workplace Code of Practice 2021
Managing respirable crystalline silica dust exposure in construction and manufacturing of construction elements Code of Practice 2022

New South Wales

Acts and regulations

Work Health and Safety Act 2011
Work Health and Safety Regulation 2025
Work Health and Safety Amendment (Silica Worker Register) Regulation 2025
Work Health and Safety Amendment (Crystalline Silica Substances) Regulation 2024

Codes of practice

Managing risks of hazardous chemicals in the workplace code of practice 2022
Managing risks of respirable crystalline silica in the workplace Code of Practice 2026

Northern Territory

Acts and regulations

Work Health and Safety (National Uniform Legislation) Act 2011
Work Health and Safety (National Uniform Legislation) Regulations 2011

Codes of practice

Managing risks of hazardous chemicals in the workplace Code of Practice 2020
Managing risks of respirable crystalline silica in the workplace Code of Practice 2026

South Australia

Acts and regulations

Work Health and Safety Act 2012
Work Health and Safety Regulation 2012

Codes of practice

Managing Risks of Hazardous Chemicals in the Workplace: Code of practice 2024

Tasmania

Acts and regulations

Work Health and Safety Act 2012
Work Health and Safety Regulations 2022

Codes of practice

Managing Risks of Hazardous Chemicals in the Workplace - Code of practice 2018

Western Australia

Acts and regulations

Work Health and Safety Act 2020
Work Health and Safety (General) Regulations 2022

Codes of practice

Managing risks of hazardous chemicals in the workplace – Code of practice 2022

Victoria

Acts and regulations

Occupational Health and Safety Act 2004
Occupational Health and Safety Regulations 2017

Personal protective equipment (PPE)

Foot Protection
Eye Protection
Face Protection
Hand ProtectionDisposable gloves
Protective ClothingDisposable or washable coveralls
Breathing ProtectionHalf-face respirator (P1 or P2, disposable or cartridge), fit-tested

Job steps, hazards and controls

Work activity
Training
- Hazard
  Exposure to respirable crystalline silica (RCS)
  Before controls4 Acute
  Controls
  - Training and information provided to workers on respirable crystalline silica (RCS) should include the following:
    Information on RCS through safety data sheet (SDS) or labels
    Risk management process
    Work practices, procedures and control measures
    How to fit, use, maintain and clean personal protective equipment (PPE)
    Emergency procedures, including any special decontamination procedures or PPE failures
    First aid and incident reporting procedures
    The purpose and results of air monitoring, including the types of health tests that may be required
    Checking controls are working and using them
    Waste collection and disposal.
    Explanation of the 30-day trigger: If a worker uses RPE for 30 or more days within a 12-month period for tasks involving RCS, they are required to undergo health monitoring.
  After controls2 Moderate
  Responsible
  - Organisation
  - Supervisor
- Hazard
  Inexperienced worker
  Before controls3 High
  Controls
  - Supervision provided to inexperienced or new workers, e.g. cutting stone or concrete for the first time or using new machinery.
  After controls2 Moderate
  Responsible
  - Organisation
  - Supervisor

IR before controls · RR after controls1 LLow2 MModerate3 HHigh4 AAcute

Overall risk after controls2 MModeratethe highest rating after controls

Work activity
Worker consultation
Workers and HSRs consulted, and everyone satisfied the controls suit the task before work starts.
Work activity
Health monitoring
Silica sources identified, exposure checked against the standard, and air and health monitoring arranged.
Work activity
Risk assessment
Dust-producing tasks, exposure and controls assessed, treating unknown processes as high-risk.
Work activity
Work area setup
Exclusion zones and warning signs that keep people without RPE out of dusty areas.
Work activity
General workplace dust control
Water suppression, ventilation, housekeeping without compressed air, and the 30-day RPE trigger.
Work activity
Respiratory PPE
Fit-tested RPE, coveralls and eye protection, with daily checks of PPE and equipment.
Work activity
Using powered saws and grinders
Water delivery or M or H-class dust extraction on saws and grinders, with slurry managed.
Work activity
Using drills
Shrouds with M or H-class dust collection, and rated vacuums for cleaning holes.
Work activity
Operating vehicle-mounted drill rigs
Dust captured at the drill bit and wetted at discharge, or drilling from a closed cab.
Work activity
Operating cab-mounted plant and vehicles that generate or are adjacent to silica dust
Sealed, positive-pressure cabins with filtered air intakes, windows closed and cabs kept clean.
Work activity
Environmental impacts
Silica waste contained and labelled, slurry cleaned up and residue kept out of drains.
Work activity
On completion
Wet clean-up, HEPA vacuuming, PPE removal and decontamination without compressed air.
Work activity
Emergency response
Medical attention for overexposure, calling 000, first aid, site emergency procedures and incident reports.

Permits

Plant and equipment

Hazardous substances

Supervisory arrangements

SWMS sign-off

This SWMS developed in consultation and cooperation with workers and relevant organisation representatives. I have read the above SWMS, and I understand its contents. I confirm that I have the skills and training, including relevant certification, to conduct the task as described. I agree to comply with safety requirements within this SWMS, including risk control measures, safe work instructions, and PPE described.

Worker’s name	Job role / positione.g. supervisor, worker, trainee	Licences, competencies & qualificationsType / descriptionClassNumber	Date	Signature
-	-	-	-	-
-	-	-	-	-
-	-	-	-	-
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)

Hierarchy of controls

Risk matrix

Step 1: Determine likelihood

Step 2: Determine consequence

Step 3: Determine the risk score

Likelihood ↑	InsignificantNo effect, or so minor that the effect is acceptable	MinorMinor first aid treatment, minimal business disruption, minimal environmental effect	ModerateSerious injuries, medium business interruption, medium environmental impact	MajorExtensive injuries or fatality, significant business interruption, environmental harm, prosecution	CatastrophicMultiple permanent disabilities or fatalities, business failure, substantial environmental harm, prosecution or imprisonment
	Consequence →
Almost certainExpected in most circumstances	2 Moderate	2 Moderate	3 High	4 Acute	4 Acute
LikelyWill probably occur in most circumstances	2 Moderate	2 Moderate	3 High	4 Acute	4 Acute
PossibleCould possibly occur at some time	1 Low	2 Moderate	2 Moderate	3 High	4 Acute
UnlikelyUnlikely but possible	1 Low	1 Low	2 Moderate	3 High	4 Acute
RareHighly unlikely to occur	1 Low	1 Low	2 Moderate	2 Moderate	3 High

1 LowRecord and monitor. Proceed with work, and review the risks regularly.
2 ModerateMaintain control measures. Be cautious when working, and monitor and review regularly.
3 HighReview before commencing work. Introduce new controls or maintain high-level controls to lower the risk level, and monitor the controls frequently.
4 AcuteDo not proceed until the risk level is reduced. Immediately introduce high-level controls, and re-assess before proceeding.

Step 4: Record risk

13 pasos más del trabajo, de Worker consultation a Emergency response

Cada uno con sus peligros, niveles de riesgo y controles, además de las firmas de tu equipo.

Prueba el editor gratis Consigue este paquete ahorro

Cómo se ve en un navegador

Consigue este paquete ahorro

Regístrate gratis y luego elige cómo lo quieres. Cada documento va a tu Biblioteca, en una carpeta con el nombre del paquete.

Incluido en los planes de pago
Usa créditos de plantilla de tu plan. Este paquete cuesta 13 en vez de 24.
Comparar planes y precios
Cómprala una sola vez
$1,169.35 ~~$2,158.80~~ pago único, y es tuya para siempre. También sirve con el plan Gratis.

Prueba el editor gratis Regístrate gratis

No necesitas tarjeta para registrarte. Los miembros con acceso anticipado tienen un 30% de descuento en cualquier plan.

Qué incluye

Silica Dust
SWMS · 14 pasos del trabajo
Silica Dust SWMS: 14 job steps covering RCS dust control, wet cutting, dust extraction, RPE, the 30-day health monitoring trigger and clean-up.
También se vende por separado
Refrigerant Gas
SWMS · 9 pasos del trabajo
SWMS for the safe use of fluorocarbon refrigerants: licensing, cylinder transport and storage, refrigerant recovery, inspection and emergency response.
También se vende por separado
Materials Duct Lifter
SWMS · 6 pasos del trabajo
Materials Duct Lifter SWMS: 6 job steps covering site set-up, power line clearances, lifter pre-inspection, operation and emergency response.
También se vende por separado
EWP, Boom, Cherry Picker and Scissor Lift
SWMS · 12 pasos del trabajo
EWP SWMS for scissor lifts, boom lifts and cherry pickers: 12 job steps, from rescue planning and set-up to working at height, fuelling and recharging.
También se vende por separado
Duct Work Installation
SWMS · 11 pasos del trabajo
SWMS for installing ductwork for exhaust and air conditioning systems: site set-up, delivery, roof space work, tools, chemicals and emergencies.
También se vende por separado
Air Conditioning Installation
SWMS · 16 pasos del trabajo
Covers installing, maintaining or repairing air conditioning units, with the risks and controls for each job step from planning to emergency response.
También se vende por separado
Mobile Plant Working Near-Around
SWMS · 8 pasos del trabajo
SWMS for people working near powered mobile plant on construction sites: traffic management, pedestrian rules, passengers, noise, lasers and emergency response.
También se vende por separado
Cool Room Construction
SWMS · 18 pasos del trabajo
SWMS for building insulated cool room and freezer panels: set-up, working at height, cutting and lifting panels, mobile plant, completion and emergencies.
También se vende por separado
Risers Working In
SWMS · 12 pasos del trabajo
Safe work method statement for working in risers, covering 12 job steps from rescue planning and entry assessment to falls, heat stress and emergencies.
También se vende por separado
Welding
SWMS · 10 pasos del trabajo
Welding SWMS: 10 job steps covering fire and explosion, gas cylinders, fumes, electrical equipment, burns, heat stress, angle grinders and emergencies.
También se vende por separado
Air Conditioning Service and Repairs
SWMS · 14 pasos del trabajo
SWMS for air conditioning service and repairs: refrigerants, indoor and outdoor unit maintenance, energised electrical work, testing and emergencies.
También se vende por separado
Confined Space Work
SWMS · 10 pasos del trabajo
A SWMS for confined space work: pre-entry risk assessment, entry permits, standby people, ventilation and gas testing, isolation and emergency retrieval.
También se vende por separado
Manual Handling
SWMS · 18 pasos del trabajo
Manual Handling SWMS: 18 job steps covering lifting and carrying, team lifts, lifting aids, sustained postures, ergonomics, driving, and people and animal handling.
También se vende por separado
Asbestos Awareness
SWMS · 4 pasos del trabajo
Asbestos Awareness SWMS: 4 job steps for identifying and reporting asbestos-containing materials and responding to accidental disturbance.
También se vende por separado
Hazardous Chemicals
SWMS · 12 pasos del trabajo
SWMS for hazardous chemicals work: purchasing, storage, labelling, handling, confined spaces, completion and emergency response.
También se vende por separado
Working in Roof Spaces
SWMS · 8 pasos del trabajo
SWMS for working in roof spaces, ceiling spaces and subfloors: electrical hazards, ladders, heat stress, vermin, snakes and emergency response.
También se vende por separado
Working On/Near Telecommunications Towers
SWMS · 8 pasos del trabajo
Working on or near telecommunications towers SWMS: 8 job steps covering tower climbing, falls, RF exposure, completion and emergencies.
También se vende por separado
Height Access Equipment
SWMS · 17 pasos del trabajo
Height Access Equipment SWMS: 17 job steps covering fixed and mobile scaffolds, trestles, extension, platform and vertical ladders, and safety harnesses.
También se vende por separado
Mechanical Ventilation System
SWMS · 15 pasos del trabajo
Mechanical Ventilation System SWMS: 15 job steps for installing a commercial kitchen exhaust canopy or hood, from set-up to emergency response.
También se vende por separado
Concrete Chasing
SWMS · 13 pasos del trabajo
Concrete chasing SWMS with 13 job steps, covering silica dust, working at height, tools, noise, vibration and emergency response.
También se vende por separado
Powered Non-powered Tools
SWMS · 12 pasos del trabajo
Hazards and controls for hand-held power tools and non-powered tools, from site set-up and pre-start checks to emergency response.
También se vende por separado
Refrigeration
SWMS · 18 pasos del trabajo
SWMS for refrigeration work: cylinder handling, system evacuation, flushing and charging, working at height, testing and emergency response.
También se vende por separado
Cool Room Repair
SWMS · 16 pasos del trabajo
A SWMS for repairing cool rooms and freezer rooms from an elevated work platform (EWP): the hazards and controls for each job step.
También se vende por separado
Pipework Mechanical
SWMS · 19 pasos del trabajo
SWMS for mechanical pipework installation: fire system, condenser water and chilled water pipework, from site set-up to commissioning.
También se vende por separado

Qué cubre

Peligros que cubre

Legislación y normas que cita

Cada SWMS incluye nuestra lista de referencia de legislación y códigos de práctica.

Lo que ahorras

Plantilla	Pasos del trabajo	Por separado
Silica Dust	14	$89.95 · 1 crédito
Refrigerant Gas	9	$89.95 · 1 crédito
Materials Duct Lifter	6	$89.95 · 1 crédito
EWP, Boom, Cherry Picker and Scissor Lift	12	$89.95 · 1 crédito
Duct Work Installation	11	$89.95 · 1 crédito
Air Conditioning Installation	16	$89.95 · 1 crédito
Mobile Plant Working Near-Around	8	$89.95 · 1 crédito
Cool Room Construction	18	$89.95 · 1 crédito
Risers Working In	12	$89.95 · 1 crédito
Welding	10	$89.95 · 1 crédito
Air Conditioning Service and Repairs	14	$89.95 · 1 crédito
Confined Space Work	10	$89.95 · 1 crédito
Manual Handling	18	$89.95 · 1 crédito
Asbestos Awareness	4	$89.95 · 1 crédito
Hazardous Chemicals	12	$89.95 · 1 crédito
Working in Roof Spaces	8	$89.95 · 1 crédito
Working On/Near Telecommunications Towers	8	$89.95 · 1 crédito
Height Access Equipment	17	$89.95 · 1 crédito
Mechanical Ventilation System	15	$89.95 · 1 crédito
Concrete Chasing	13	$89.95 · 1 crédito
Powered Non-powered Tools	12	$89.95 · 1 crédito
Refrigeration	18	$89.95 · 1 crédito
Cool Room Repair	16	$89.95 · 1 crédito
Pipework Mechanical	19	$89.95 · 1 crédito
Comprando uno por uno		~~$2,158.80~~ · 24 créditos
En este paquete		$1,169.35 · 13 créditos Ahorras $989.45

Opiniones

Todavía no hay opiniones.

Cómo funcionan las plantillas

Pruébalo antes de pagar.

Vista previa gratis
Los pasos del trabajo, los peligros y la primera tarea de cada plantilla se pueden leer. Sin registrarte.
Prueba el editor
Adapta un SWMS de demostración con tu empresa, tu trabajo y tu obra, en una computadora o en tu teléfono.
Regístrate gratis
Tus datos y tu logo se pasan. Esta plantilla se abre ya rellenada.
Usa un crédito o compra una sola vez
Los planes de pago incluyen créditos de plantilla cada mes. O compra esta para quedártela.

HVAC-Refrigeration

Vista previa de SWMS Silica Dust

Site management plan

High-risk construction work (HRCW)

Working with a risk of a fall over 2 metres

Planning and preparation

Hold points

Training and licences

Worker duties and responsibilities

Monitoring and review

Site-specific notes

Acts, regulations and codes of practice

Personal protective equipment (PPE)

Job steps, hazards and controls

Consigue este paquete ahorro

Incluido en los planes de pago

Cómprala una sola vez

Qué incluye

Qué cubre

Peligros que cubre

Legislación y normas que cita

Lo que ahorras

Opiniones

Pruébalo antes de pagar.

Vista previa gratis

Prueba el editor

Regístrate gratis

Usa un crédito o compra una sola vez