模板文件为英文。

超值套装 · 14 个模板属于Flooring Combo

Carpet Laying

SWMS · SWMS-10041

14 个工作步骤
版本 13

This Carpet Laying Safe Work Method Statement (SWMS) sets out the safety protocols and precautions for installing carpets and carpet tiles, from preparing concrete and timber floors and laying plywood underlay to laying, trimming and seaming carpet.

It takes your crew through 14 job steps, from out-of-hours work, working alone and setting up the work area to materials delivery, housekeeping, tool use, floor preparation, carpet and tile laying, completion and emergency response.

It suits carpet installation companies, property management firms, construction and renovation contractors, and facility management services.

Written by SafetyDocs safety experts, who have been writing safety documents since 2004.

Carpet Laying

SWMSVersion 13

Company doing the work: [Company]
Business contact and phone: —
Responsible person (for monitoring SWMS and work): —
Responsible person's phone: —
Responsible person's signature: —
Date signed: —

Principal contractor (PC): [Principal contractor]
PC address: —
PC phone: [PC phone]
Date SWMS provided to PC: —
Job site address: [Site address]
Part of a construction project: —

Site management plan

If the work is part of a construction project, this SWMS must align with requirements of the Site Management Plan in place for the Construction Project.

High-risk construction work (HRCW)

This work activity involves the following “High-Risk Construction Work” (HRCW - identified in the Job Task column)

Mobile PlantWork in an area where there is any movement of powered mobile plant

Planning and preparation

Planning/preparation

Liaise with Principal Contractor to identify on-site safety systems and procedures
Establish supervisory and communication arrangements
Principal contractor to confirm emergency response procedures are in place.

Hold points

Hold points identified and signed off before continuing work. (specify the hold points)

Training/licence

All workers to have a General Construction Induction Card
Relevant workers have relevant certificates of competency, licenses, and training. Specify on the SWMS Sign-off for each worker.
Trained First Aider on site
All workers trained in site-specific emergency and evacuation procedures, SWMS, safe work procedures, and safety data sheets.

Worker duties and responsibilities

Fit condition for work, i.e., no signs of fatigue, alcohol or drugs
Attend all site inductions/briefings
Comply with all site requirements, e.g. PPE, Traffic Management Plans (TMP)
Only carry out work related to the contract
Inspect completed work and report possible safety, environmental and quality matters to the supervisor.

Monitor/review

All people involved in the task must have this SWMS communicated to them before work commences
SWMS to be reviewed and amended if necessary, in consultation with relevant people after any near miss or incident
If additional site hazards identified, review this SWMS and amend control measures to suit
People, including workers, contractors and sub-contractors, affected by the revisions to this SWMS, must be informed ASAP
Give the principal contractor a copy of the revised SWMS
The site supervisor to monitor works against the controls stated in this SWMS
SWMS must be kept on-site and made available for inspection or review
Keep a record of this SWMS until the job is complete or for two years if involved in a notifiable incident
Regardless of any other factor, the person in control of the workplace must review this SWMS at least annually.

Site-specific notes

Legislation and codes of practice

Australian Government

Acts and regulations

Work Health and Safety Act 2011
Work Health and Safety Regulations 2011

Codes of practice

Work Health and Safety (First Aid in the Workplace) Code of Practice 2015
Work Health and Safety (How to Manage Work Health and Safety Risks) Code of Practice 2015
Work Health and Safety (Managing the Work Environment and Facilities) Code of Practice 2015
Work Health and Safety (Construction Work) Code of Practice 2015

Australian Capital Territory

Acts and regulations

Work Health and Safety Act 2011
Work Health and Safety Regulation 2011

Codes of practice

Work Health and Safety (First Aid in the Workplace Code of Practice) Approval 2020
Work Health and Safety (How to Manage Work Health and Safety Risks Code of Practice) Approval 2025
Work Health and Safety (Managing the Work Environment and Facilities) Code of Practice 2025
Work Health and Safety (Construction Work Code of Practice) Approval 2025

Queensland

Acts and regulations

Work Health and Safety Act 2011
Work Health and Safety Regulation 2011

Codes of practice

First Aid in the Workplace Code of Practice 2021
How to Manage Work Health and Safety Risks Code of Practice 2021
Managing the Work Environment and Facilities Code of Practice 2021

New South Wales

Acts and regulations

Work Health and Safety Act 2011
Work Health and Safety Regulation 2025

Codes of practice

First Aid in the workplace code of practice 2020
How to manage work health and safety risks code of practice 2019
Managing the work environment and facilities code of practice 2019
Construction work code of practice 2019

Northern Territory

Acts and regulations

Work Health and Safety (National Uniform Legislation) Act 2011
Work Health and Safety (National Uniform Legislation) Regulations 2011

Codes of practice

First aid in the workplace – Code of practice 2022
How to manage work health and safety risks - Code of practice 2026
Managing the work environment and facilities - Code of practice 2026
Construction work - code of practice 2026

South Australia

Acts and regulations

Work Health and Safety Act 2012
Work Health and Safety Regulation 2012

Codes of practice

First Aid in the Workplace: Code of practice 2020
How to Manage Work Health and Safety Risks: Code of practice 2020
Managing the Work Environment and Facilities: Code of practice 2020
Construction work Code of Practice 2024

Tasmania

Acts and regulations

Work Health and Safety Act 2012
Work Health and Safety Regulations 2022

Codes of practice

First Aid in the Workplace - Code of practice 2020
How to Manage Work Health and Safety Risks - Code of practice 2024
Managing the Work Environment and Facilities - Code of practice 2024
Construction Work - Code of practice 2024

Western Australia

Acts and regulations

Work Health and Safety Act 2020
Work Health and Safety (General) Regulations 2022

Codes of practice

First aid in the workplace - Code of Practice 2022
How to manage work health and safety risks – Code of practice 2022
Managing the work environment and facilities – Code of practice 2022
Construction work – Code of practice 2022

Victoria

Acts and regulations

Occupational Health and Safety Act 2004
Occupational Health and Safety Regulations 2017

Personal protective equipment (PPE)

Foot Protection
High Visibility
Eye Protection
Hand Protection
Protective Clothing
Breathing Protection

Do not wear rings, watches or jewellery that may become entangled. Long and loose hair must be tied back.

Job steps, hazards and controls

Work activity
Out-of-hours / night work
- Hazard
  Fatigue
  Unauthorised access
  Before controls3 High
  Controls
  - Allow adequate meal breaks for workers; particularly if they have worked during part of the day, Allow time to rest & recover sufficiently to work safely into the evening/night
  - Do not schedule full double shifts for workers as worker fatigue increases the risk of incidents
  - Workers have access to:
    Suitable amenities (toilets/wash facilities/drinking water)
    Sufficient lighting (including parking areas)
    Air conditioning and heating
    Mechanical ventilation if required
    Emergency exits
    Safe area for parking/unloading equipment – protected from rain
  - Additional security personnel on-site to ensure no unauthorised access by the general public while work is being performed
  - Ensure that adequate lighting is available
  - No worker should work alone on the site at night.
  After controls2 Moderate
  Responsible
  - Supervisor

IR before controls · RR after controls1 LLow2 MModerate3 HHigh4 AAcute

Overall risk after controls2 MModeratethe highest rating after controls

Work activity
Working alone
Use a buddy system, test the communication system and agree regular call-ins with the supervisor.
Work activity
Arrival on-site & assess on-site conditions
Park clear of traffic, report to the site supervisor, complete the site induction and a JSA for unanticipated hazards.
Work activity
Work area set-up
Set up exclusion zones, barriers and traffic control, and unload materials by mechanical means or team lifts.
Work activity
Materials delivery by truck
Follow the traffic management plan, use a spotter for reversing trucks and clear the unloading zone.
Work activity
Environment
Control noise, dust, waste, chemicals and spills, and keep vehicles to established tracks and roads.
Work activity
Housekeeping
Keep the work area clean, lit and clear of trip hazards, clean spills immediately and wear suitable footwear.
Work activity
Working with powered & non-powered tools
Inspect tools before use, use tested and tagged leads with RCD protection and isolate power before adjusting.
Work activity
Concrete floor preparation
Follow the levelling compound's directions and SDS, and control silica dust with water delivery or HEPA dust collection and RPE.
Work activity
Timber floor preparation including laying plywood underlay
Keep wood filler away from ignition sources, extract sanding dust, and use power saws and nail guns safely.
Work activity
Carpet laying, trimming and seaming
Use a power stretcher and kneepads, limit awkward postures, and use staplers, knives, seaming products and seam irons safely.
Work activity
Laying carpet tiles
Lay tiles to the manufacturer's instructions with ventilation, gloves and splash goggles, and contain adhesive spills.
Work activity
On completion
Remove or add barricades, disconnect and inspect leads, clean up silica dust and sign out on the site register.
Work activity
Emergency response
Call 000, follow the site emergency and evacuation procedures, apply first aid and complete an incident report.

Permits

Plant & equipment

Hazardous substances

Supervisory arrangements

SWMS sign-off

This SWMS developed in consultation and cooperation with workers and relevant organisation representatives. I have read the above SWMS, and I understand its contents. I confirm that I have the skills and training, including relevant certification, to conduct the task as described. I agree to comply with safety requirements within this SWMS, including risk control measures, safe work instructions, and PPE described.

Worker’s name	Job role / positione.g. supervisor, worker, trainee	Licences, competencies & qualificationsType / descriptionClassNumber	Date	Signature
-	-	-	-	-
-	-	-	-	-
-	-	-	-	-
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)

Hierarchy of controls

Risk matrix

Step 1: Determine likelihood

Step 2: Determine consequence

Step 3: Determine the risk score

Likelihood ↑	InsignificantNo effect, or so minor that the effect is acceptable	MinorMinor first aid treatment, minimal business disruption, minimal environmental effect	ModerateSerious injuries, medium business interruption, medium environmental impact	MajorExtensive injuries or fatality, significant business interruption, environmental harm, prosecution	CatastrophicMultiple permanent disabilities or fatalities, business failure, substantial environmental harm, prosecution or imprisonment
	Consequence →
Almost certainExpected in most circumstances	2 Moderate	2 Moderate	3 High	4 Acute	4 Acute
LikelyWill probably occur in most circumstances	2 Moderate	2 Moderate	3 High	4 Acute	4 Acute
PossibleCould possibly occur at some time	1 Low	2 Moderate	2 Moderate	3 High	4 Acute
UnlikelyUnlikely but possible	1 Low	1 Low	2 Moderate	3 High	4 Acute
RareHighly unlikely to occur	1 Low	1 Low	2 Moderate	2 Moderate	3 High

1 LowRecord and monitor. Proceed with work, and review the risks regularly.
2 ModerateMaintain control measures. Be cautious when working, and monitor and review regularly.
3 HighReview before commencing work. Introduce new controls or maintain high-level controls to lower the risk level, and monitor the controls frequently.
4 AcuteDo not proceed until the risk level is reduced. Immediately introduce high-level controls, and re-assess before proceeding.

Step 4: Record risk

还有 13 个工作步骤，从“Working alone”到“Emergency response”

每一步都有危险、风险等级和控制措施，另附工人签到。

免费试用编辑器获取这个超值套装

在浏览器中的样子

获取这个超值套装

免费注册，然后选择获取方式。每份文件都会放进你的模板库，存在以套装命名的文件夹里。

付费套餐包含
使用套餐中的模板额度。本套装只需 11 个额度，而不是 14 个。
比较套餐和价格
单独购买
$989.45 ~~$1,259.30~~ 一次付清，永久归你。免费套餐也能用。

免费试用编辑器免费注册

注册无需银行卡。抢先体验会员购买任何套餐都可享 30% 折扣。

涵盖内容

14 个工作步骤

Out-of-hours / night workPlan meal and rest breaks, amenities, lighting and security, and make sure no one works alone on site at night.
Working aloneUse a buddy system, test the communication system and agree regular call-ins with the supervisor.
Arrival on-site & assess on-site conditionsPark clear of traffic, report to the site supervisor, complete the site induction and a JSA for unanticipated hazards.
Work area set-upSet up exclusion zones, barriers and traffic control, and unload materials by mechanical means or team lifts.
Materials delivery by truckFollow the traffic management plan, use a spotter for reversing trucks and clear the unloading zone.
EnvironmentControl noise, dust, waste, chemicals and spills, and keep vehicles to established tracks and roads.
HousekeepingKeep the work area clean, lit and clear of trip hazards, clean spills immediately and wear suitable footwear.
Working with powered & non-powered toolsInspect tools before use, use tested and tagged leads with RCD protection and isolate power before adjusting.
Concrete floor preparationFollow the levelling compound's directions and SDS, and control silica dust with water delivery or HEPA dust collection and RPE.
Timber floor preparation including laying plywood underlayKeep wood filler away from ignition sources, extract sanding dust, and use power saws and nail guns safely.
Carpet laying, trimming and seamingUse a power stretcher and kneepads, limit awkward postures, and use staplers, knives, seaming products and seam irons safely.
Laying carpet tilesLay tiles to the manufacturer's instructions with ventilation, gloves and splash goggles, and contain adhesive spills.
On completionRemove or add barricades, disconnect and inspect leads, clean up silica dust and sign out on the site register.
Emergency responseCall 000, follow the site emergency and evacuation procedures, apply first aid and complete an incident report.

涵盖的危险

引用的法规和标准

每份 SWMS 都附有我们的法规和实施规程参考清单。

模板如何使用

在付款前先试用。

免费预览
每个模板的工作步骤、危险和第一项任务都可以直接阅读，无需注册。
试用编辑器
在电脑或手机上，用你的公司、工作和工地信息修改一份演示 SWMS。
免费注册
你的信息和标志都会带过去。这个模板打开时已经填好。
使用额度或单独购买
付费套餐每月都包含模板额度。也可以单独购买这一份，永久保留。

Carpet Laying

Carpet Laying SWMS 预览

Site management plan

High-risk construction work (HRCW)

Planning and preparation

Planning/preparation

Hold points

Training/licence

Worker duties and responsibilities

Monitor/review

Site-specific notes

Legislation and codes of practice

Personal protective equipment (PPE)

Job steps, hazards and controls

获取这个超值套装

付费套餐包含

单独购买

涵盖内容

14 个工作步骤

涵盖的危险

引用的法规和标准

在付款前先试用。

免费预览

试用编辑器

免费注册

使用额度或单独购买