Turf Laying Maxi Rolls

SWMS · SWMS-10554

14 job steps
Version 4
Landscaping
Reads on any phone

This SWMS covers the hazards and controls for laying maxi turf rolls with a stand-on turf-laying machine.

It takes your crew through 14 job steps, from checking the weather, arriving on site and setting up the work area to delivering the turf layer, laying and trimming the turf, rolling it, fuelling the plant, completion and emergency response.

It suits businesses and contractors in landscaping and construction that lay turf with maxi rolls, and the site supervisors, turf-laying operators and safety officers who run the work.

Written by SafetyDocs safety experts, who have been writing safety documents since 2004.

Turf Laying Maxi Rolls

SWMSVersion 4

Company doing the work: [Company]
Business contact: —
Business contact phone: —
Responsible person (for monitoring SWMS and work): —
Responsible person's phone: —
Responsible person's signature: —
Date signed: —

Principal contractor (PC): [Principal contractor]
PC address: —
PC phone: [PC phone]
Date SWMS provided to PC: —
Job site address: [Site address]
Part of a construction project: —

Site management plan

If the work is part of a construction project, this SWMS must align with requirements of the Site Management Plan in place for the Construction Project.

High-risk construction work (HRCW)

This work activity involves the following “High-Risk Construction Work” (HRCW - identified in the Job Task column)

Mobile Plant

Planning and preparation

Planning/preparation

Liaise with Principal Contractor to identify on-site safety systems and procedures
Establish supervisory and communication arrangements
Principal contractor to confirm emergency response procedures are in place.

Hold points

Hold points identified and signed off before continuing work. (specify the hold points)

Training/licence

All workers to have a General Construction Induction Card
Relevant workers have relevant certificates of competency, licenses, and training. Specify on the SWMS Sign-off for each worker.
Trained First Aider on site
All workers trained in site-specific emergency and evacuation procedures, SWMS, safe work procedures, and safety data sheets.

Worker duties and responsibilities

Fit condition for work, i.e., no signs of fatigue, alcohol or drugs
Attend all site inductions/briefings
Comply with all site requirements, e.g. PPE, Traffic Management Plans (TMP)
Only carry out work related to the contract
Inspect completed work and report possible safety, environmental and quality matters to the supervisor.

Monitor/review

All people involved in the task must have this SWMS communicated to them before work commences
SWMS to be reviewed and amended if necessary, in consultation with relevant people after any near miss or incident
If additional site hazards identified, review this SWMS and amend control measures to suit
People, including workers, contractors and sub-contractors, affected by the revisions to this SWMS, must be informed ASAP
Give the principal contractor a copy of the revised SWMS
The site supervisor to monitor works against the controls stated in this SWMS
SWMS must be kept on-site and made available for inspection or review
Keep a record of this SWMS until the job is complete or for two years if involved in a notifiable incident
Regardless of any other factor, the person in control of the workplace must review this SWMS at least annually.

Site-specific notes

Act, regulations, codes of practice references

None listed.

Personal Protective Equipment (PPE)

Foot Protection
Hearing Protection
High Visibility
Hand Protection
Sun Protection

Job steps, hazards and controls

Work activity
Check weather conditions & prepare
- Hazard
  Extreme weather
  Before controls3 High
  Controls
  - Check weather conditions – do not work in extreme conditions
  - Reschedule works to work in more moderate temperatures.
  After controls2 Moderate
  Responsible
  - Supervisorto maintain awareness of weather conditions
  - Operatorto follow controls
- Hazard
  Hyperthermia; Hypothermia
  Before controls3 High
  Controls
  - Ensure vehicle cabin is air-conditioned
  - Workers trained to recognise the symptoms of hyperthermia and hypothermia
  - Hot conditions. Ensure:
    Suitable protective clothing
    Sun brim on hard hats
    Safety glasses - UV rated
    Use 30+ sunscreen on exposed skin
    Adequate drinking water
    Access to shade on breaks
    Adequate breaks.
  - Cold conditions. Ensure:
    Schedule warm-up breaks
    Hold breaks inside
    Dress warmly in layers
    Stay dry (wet clothing chills the body rapidly)
    Workers must get out of the cold as soon as they can if starting to feel symptoms
    Alcohol, cigarettes, caffeine and certain medications increase susceptibility to cold.
  After controls2 Moderate
  Responsible
  - Supervisorto maintain awareness of weather conditions
  - Operatorto follow controls

IR before controls · RR after controls1 LLow2 MModerate3 HHigh4 AAcute

Overall risk after controls2 MModeratethe highest rating after controls

Work activity
Arrival on-site & assess onsite conditions
Assess the site for safety before starting work
Work activity
Work area set-up
Set up safe work zones and exclusion areas
Work activity
Environment
Manage the effects on the environment, including noise, air quality and waste
Work activity
House keeping
Keep the work area clean and safe to prevent accidents
Work activity
Manual tasks
Prevent musculoskeletal injuries during manual tasks
Work activity
Delivery, set-up & removal of the turf layer
Deliver, set up and remove the turf layer safely
Work activity
Establish a communication system with ground workers
Set up clear communication with the ground workers
Work activity
Laying the turf
Lay the turf safely
Work activity
Trimming the turf using a demo saw
Trim the turf safely with a demolition saw
Work activity
Rolling the turf
Roll the turf safely
Work activity
Fuelling the plant
Refuel the plant safely to prevent fires and exposure to fuel
Work activity
On completion
Secure the equipment and the work area on completion
Work activity
Emergency response
Respond to emergencies on site

Permits

Plant & equipment

Hazardous substances

Supervisory arrangements

SWMS Sign-off

This SWMS developed in consultation and cooperation with workers and relevant organisation representatives. I have read the above SWMS, and I understand its contents. I confirm that I have the skills and training, including relevant certification, to conduct the task as described. I agree to comply with safety requirements within this SWMS, including risk control measures, safe work instructions, and PPE described.

Worker’s name	Job role / positione.g. supervisor, worker, trainee	Licences, competencies & qualificationsType / descriptionClassNumber	Date	Signature
-	-	-	-	-
-	-	-	-	-
-	-	-	-	-
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)
		General construction induction (White Card)

Hierarchy of controls

Risk matrix

Step 1: Determine likelihood

Step 2: Determine consequence

Step 3: Determine the risk score

Likelihood ↑	InsignificantNo effect, or so minor that the effect is acceptable	MinorMinor first aid treatment, minimal business disruption, minimal environmental effect	ModerateSerious injuries, medium business interruption, medium environmental impact	MajorExtensive injuries or fatality, significant business interruption, environmental harm, prosecution	CatastrophicMultiple permanent disabilities or fatalities, business failure, substantial environmental harm, prosecution or imprisonment
	Consequence →
Almost certainExpected in most circumstances	2 Moderate	2 Moderate	3 High	4 Acute	4 Acute
LikelyWill probably occur in most circumstances	2 Moderate	2 Moderate	3 High	4 Acute	4 Acute
PossibleCould possibly occur at some time	1 Low	2 Moderate	2 Moderate	3 High	4 Acute
UnlikelyUnlikely but possible	1 Low	1 Low	2 Moderate	3 High	4 Acute
RareHighly unlikely to occur	1 Low	1 Low	2 Moderate	2 Moderate	3 High

1 LowRecord and monitor. Proceed with work, and review the risks regularly.
2 ModerateMaintain control measures. Be cautious when working, and monitor and review regularly.
3 HighReview before commencing work. Introduce new controls or maintain high-level controls to lower the risk level, and monitor the controls frequently.
4 AcuteDo not proceed until the risk level is reduced. Immediately introduce high-level controls, and re-assess before proceeding.

Step 4: Record risk

13 more job steps, from Arrival on-site & assess onsite conditions to Emergency response

Each with its hazards, risk ratings and controls, plus your crew's sign-on.

Try the editor free Get this template

How it reads in a browser

Get this template

Sign up free, then choose how you'd like it. Your company details fill in for you.

Included in paid plans
Use template credits from your plan. This one costs 1.
Compare plans and prices
Buy it once
$89.95 paid once, and it's yours to keep. Works on the free plan too.

Try the editor free Sign up free

No card needed to sign up. Early access members get 30% off any plan.

What it covers

14 job steps

Check weather conditions & prepareCheck the weather and prepare for the conditions
Arrival on-site & assess onsite conditionsAssess the site for safety before starting work
Work area set-upSet up safe work zones and exclusion areas
EnvironmentManage the effects on the environment, including noise, air quality and waste
House keepingKeep the work area clean and safe to prevent accidents
Manual tasksPrevent musculoskeletal injuries during manual tasks
Delivery, set-up & removal of the turf layerDeliver, set up and remove the turf layer safely
Establish a communication system with ground workersSet up clear communication with the ground workers
Laying the turfLay the turf safely
Trimming the turf using a demo sawTrim the turf safely with a demolition saw
Rolling the turfRoll the turf safely
Fuelling the plantRefuel the plant safely to prevent fires and exposure to fuel
On completionSecure the equipment and the work area on completion
Emergency responseRespond to emergencies on site

Turf Laying Maxi Rolls

Site management plan

High-risk construction work (HRCW)