Early access offer:Early access: 30% off, for as long as you stay subscribed.

Claim offer
Try the editor free

System · 165 documentsPart of Civil Roadworks Integrated Industry Suite

Horizontal Directional Boring

SWMS · SWMS-10317

  • 16 job steps
  • Version 8

This Horizontal Directional Boring Safe Work Method Statement (SWMS) covers the hazards and controls of conducting horizontal underground boring.

It covers 16 job steps, from training on respirable crystalline silica (RCS), planning, site set-up and locating underground services to delivering the drill rig, drilling, rig maintenance, refuelling, completion and emergency response.

It includes controls for high-risk construction work around mobile plant, hazardous atmospheres and traffic corridors, a risk matrix to rate each hazard, and a sign-off register for workers.

It suits civil construction companies, utility service providers, infrastructure development firms, and safety officers and consultants involved in horizontal directional boring.

See its own page

Preview of the Horizontal Directional Boring SWMS

Horizontal Directional Boring

SWMSVersion 8
Company doing the work
[Company]
Business contact and phone
—
Responsible person (for monitoring SWMS and work)
—
Responsible person's phone
—
Responsible person's signature
—
Date signed
—
Principal Contractor (PC)
—
PC Address
—
PC phone
—
Date SWMS provided to PC
—
Job Site Address
—
Part of a construction project
—

Site management plan

If the work is part of a construction project, this SWMS must align with requirements of the Site Management Plan in place for the Construction Project.

High-risk construction work

This work activity involves the following “High-Risk Construction Work” (HRCW - identified in the Job Task column)

  • Mobile PlantMobile plant movement
  • Hazardous AtmosphereWork in an area that may have a contaminated or flammable atmosphere
  • Traffic CorridorsWork carried out adjacent to a road, railway or shipping lane, traffic corridor

Planning and preparation

Planning/preparation

  • Liaise with Principal Contractor to identify on-site safety systems and procedures

  • Establish supervisory and communication arrangements

  • Principal contractor to confirm emergency response procedures are in place.

Hold points

  • Hold points identified and signed off before continuing work. (specify the hold points)

Training/licence

  • All workers to have a General Construction Induction Card

  • Relevant workers have relevant certificates of competency, licenses, and training. Specify on the SWMS Sign-off for each worker.

  • Trained First Aider on site

  • All workers trained in site-specific emergency and evacuation procedures, SWMS, safe work procedures, and safety data sheets.

Worker duties and responsibilities

  • Fit condition for work, i.e., no signs of fatigue, alcohol or drugs

  • Attend all site inductions/briefings

  • Comply with all site requirements, e.g. PPE, Traffic Management Plans (TMP)

  • Only carry out work related to the contract

  • Inspect completed work and report possible safety, environmental and quality matters to the supervisor.

Monitor/review

  • All people involved in the task must have this SWMS communicated to them before work commences

  • SWMS to be reviewed and amended if necessary, in consultation with relevant people after any near miss or incident

  • If additional site hazards identified, review this SWMS and amend control measures to suit

  • People, including workers, contractors and sub-contractors, affected by the revisions to this SWMS, must be informed ASAP

  • Give the principal contractor a copy of the revised SWMS

  • The site supervisor to monitor works against the controls stated in this SWMS

  • SWMS must be kept on-site and made available for inspection or review

  • Keep a record of this SWMS until the job is complete or for two years if involved in a notifiable incident

  • Regardless of any other factor, the person in control of the workplace must review this SWMS at least annually.

Site-specific notes

Legislation and codes of practice

None listed.

Personal protective equipment (PPE)

  • Foot Protection
  • Hearing Protection
  • High Visibility
  • Head Protection
  • Eye Protection
  • Hand Protection
  • Sun Protection

Do not wear rings, watches or jewellery that may become entangled. Long and loose hair must be tied back.

Job steps, hazards and controls

  • Work activity

    Provide training on the health effects associated with RCS

    • Hazard

      Exposure to respirable crystalline silica (RCS) – dust inhalation

      Before controls3 High
      Controls

      • Training and information provided to workers on RCS should include:

        • Identification of RCS dust through Safety Datasheet (SDS) or labels

        • Dust exposure prevention strategies

        • Checking controls are working and using them

        • When and how to use any respiratory protective equipment provided and what to do if something goes wrong (Including worker respirator fit and check processes).

      After controls2 Moderate
      Responsible
      • Supervisor

IR before controls · RR after controls1 LLow2 MModerate3 HHigh4 AAcute

Overall risk after controls2 MModeratethe highest rating after controls

15 more job steps, from Planning to Emergency response

Each with its hazards, risk ratings and controls, plus your crew's sign-on.

Try the editor freeGet this system
Preview as

How it reads in a browser

Get this system

Sign up free, then choose how you'd like it. Every document goes into your Library, in a folder named for the pack.

  • Included in paid plans

    Use template credits from your plan. This one costs 20.

    Compare plans and prices

  • Buy it once

    $999.90 paid once, and it's yours to keep. Works on the free plan too.

Try the editor freeSign up free

No card needed to sign up. Early access members get 30% off any plan.

What it covers

16 job steps

  1. Provide training on the health effects associated with RCSTrain workers on RCS dust and its controls
  2. PlanningAssess the site and locate underground services
  3. Check weather conditions & prepareCheck the weather and plan for hot or cold conditions
  4. Arrival on-site & assess onsite conditionsArrive on site and assess site conditions
  5. Work area set-upSet up barricades, exclusion zones and traffic control
  6. EnvironmentControl noise, dust, waste, fuels and run-off
  7. House keepingKeep the work area clean and clear
  8. Manual tasksHandle materials and equipment safely
  9. Conduct a site surveyLocate and mark underground services
  10. Checking maintenance holes/pit safetyOpen pits without entering them
  11. Delivery and removal of drill rigLoad, transport and unload the drill rig
  12. DrillingDrill the bore and respond to service strikes
  13. Rig maintenance on-siteMaintain the rig parked, isolated and supported
  14. Fuelling on-siteRefuel safely
  15. On completionPark the machine, secure the site and sign out
  16. Emergency responseRespond to injuries and emergencies

Hazards it covers

How templates work

Try it before you pay.

  1. Preview free

    Every template's job steps, hazards and first task are open to read. No sign-up.

  2. Try the editor

    Tailor a demo SWMS with your company, job and site, on a computer or your phone.

  3. Sign up free

    Your details and logo carry over. This template opens already filled in.

  4. Use a credit or buy once

    Paid plans include template credits every month. Or buy this one to keep.